dcmpsprt

Section: OFFIS DCMTK (1)
Updated: Thu Nov 29 2018
Page Index
 

NAME

dcmpsprt - Read DICOM images and presentation states and render print job

 

SYNOPSIS

dcmpsprt [options] dcmfile-in...

 

DESCRIPTION

The dcmpsprt utility reads one or more DICOM images and presentation states and creates a print job. The print job consists of one Stored Print object and one or more Hardcopy Grayscale images and is written to the database specified in the configuration file. The print job can optionally be spooled to the printer. In this case, dcmpsprt calls the dcmprscu application which performs communication with the printer.  

PARAMETERS

dcmfile-in  DICOM image file(s) to be printed

 

OPTIONS

 

general options

  -h   --help
         print this help text and exit

       --version
         print version information and exit

       --arguments
         print expanded command line arguments

  -q   --quiet
         quiet mode, print no warnings and errors

  -v   --verbose
         verbose mode, print processing details

  -d   --debug
         debug mode, print debug information

  -ll  --log-level  [l]evel: string constant
         (fatal, error, warn, info, debug, trace)
         use level l for the logger

  -lc  --log-config  [f]ilename: string
         use config file f for the logger

 

processing options

  +p   --pstate  [p]state file: string
         render the following image with presentation state p
         (this option can be specified multiple times)

  -c   --config  [f]ilename: string
         process using settings from configuration file f

  -p   --printer  [n]ame: string (default: 1st printer in cfg file)
         select printer with identifier n from cfg file

 

spooling options

  -s   --spool
         spool print job to DICOM printer

       --nospool
         do not spool print job to DICOM printer (default)

 

film orientation options

       --portrait
         set portrait orientation

       --landscape
         set landscape orientation

       --default-orientation
         use printer default (default)

 

trim (border) options

       --trim
         set trim on

       --no-trim
         set trim off

       --default-trim
         use printer default (default)

 

requested decimate/crop behavior options

       --request-decimate
         request decimate

       --request-crop
         request crop

       --request-fail
         request failure

       --default-request
         use printer default (default)

 

print presentation LUT options

       --default-plut
         do not create presentation LUT (default)

       --identity
         set IDENTITY presentation LUT shape

       --plut  [l]ut identifier: string
         add LUT l to print job

       --inverse-plut
         render the inverse presentation LUT into the
         bitmap of the hardcopy grayscale image

       --illumination  [v]alue: integer (0..65535)
         set illumination to v (in cd/m^2)

       --reflection  [v]alue: integer (0..65535)
         set reflected ambient light to v (in cd/m^2)

 

basic film session options (only with –spool)

       --copies  [v]alue: integer (1..100, default: 1)
         set number of copies to v

       --medium-type  [v]alue: string
         set medium type to v

       --destination  [v]alue: string
         set film destination to v

       --label  [v]alue: string
         set film session label to v

       --priority  [v]alue: string
         set print priority to v

       --owner  [v]alue: string
         set film session owner ID to v

 

annotation options

       --no-annotation
         do not create annotation (default)

  -a   --annotation  [t]ext: string
         create annotation with text t

  +pd  --print-date
         prepend date/time to annotation (default)

  -pd  --print-no-date
         do not prepend date/time to annotation

  +pn  --print-name
         prepend printer name to annotation (default)

  -pn  --print-no-name
         do not prepend printer name to annotation

  +pl  --print-lighting
         prepend illumination to annotation (default)

  -pl  --print-no-lighting
         do not prepend illumination to annotation

 

overlay options

  +O   --overlay  [f]ilename: string, [x] [y]: integer
         load overlay data from PBM file f and display at position (x,y)

  +Og  --ovl-graylevel  [v]alue: integer (0..4095)
         use overlay gray level v (default: 4095 = white)

 

other print options

  -l   --layout  [c]olumns [r]ows: integer (default: 1 1)
         use 'STANDARD,r' image display format
       --filmsize  [v]alue: string
         set film size ID to v

       --magnification  [v]alue: string
         set magnification type to v

       --smoothing  [v]alue: string
         set smoothing type to v

       --configinfo  [v]alue: string
         set configuration information to v

       --resolution  [v]alue: string
         set requested resolution ID to v

       --border  [v]alue: string
         set border density to v

       --empty-image  [v]alue: string
         set empty image density to v

       --max-density  [v]alue: string
         set max density to v

       --min-density  [v]alue: string
         set min density to v

       --img-polarity  [v]alue: string
         set image box polarity to v (NORMAL or REVERSE)

       --img-request-size  [v]alue: string
         set requested image size to v (width in mm)

       --img-magnification  [v]alue: string
         set image box magnification type to v

       --img-smoothing  [v]alue: string
         set image box smoothing type to v

       --img-configinfo  [v]alue: string
         set image box configuration information to v

 

LOGGING

The level of logging output of the various command line tools and underlying libraries can be specified by the user. By default, only errors and warnings are written to the standard error stream. Using option --verbose also informational messages like processing details are reported. Option --debug can be used to get more details on the internal activity, e.g. for debugging purposes. Other logging levels can be selected using option --log-level. In --quiet mode only fatal errors are reported. In such very severe error events, the application will usually terminate. For more details on the different logging levels, see documentation of module 'oflog'.

In case the logging output should be written to file (optionally with logfile rotation), to syslog (Unix) or the event log (Windows) option --log-config can be used. This configuration file also allows for directing only certain messages to a particular output stream and for filtering certain messages based on the module or application where they are generated. An example configuration file is provided in <etcdir>/logger.cfg.  

COMMAND LINE

All command line tools use the following notation for parameters: square brackets enclose optional values (0-1), three trailing dots indicate that multiple values are allowed (1-n), a combination of both means 0 to n values.

Command line options are distinguished from parameters by a leading '+' or '-' sign, respectively. Usually, order and position of command line options are arbitrary (i.e. they can appear anywhere). However, if options are mutually exclusive the rightmost appearance is used. This behavior conforms to the standard evaluation rules of common Unix shells.

In addition, one or more command files can be specified using an '@' sign as a prefix to the filename (e.g. @command.txt). Such a command argument is replaced by the content of the corresponding text file (multiple whitespaces are treated as a single separator unless they appear between two quotation marks) prior to any further evaluation. Please note that a command file cannot contain another command file. This simple but effective approach allows one to summarize common combinations of options/parameters and avoids longish and confusing command lines (an example is provided in file <datadir>/dumppat.txt).  

ENVIRONMENT

The dcmpsprt utility will attempt to load DICOM data dictionaries specified in the DCMDICTPATH environment variable. By default, i.e. if the DCMDICTPATH environment variable is not set, the file <datadir>/dicom.dic will be loaded unless the dictionary is built into the application (default for Windows).

The default behavior should be preferred and the DCMDICTPATH environment variable only used when alternative data dictionaries are required. The DCMDICTPATH environment variable has the same format as the Unix shell PATH variable in that a colon (':') separates entries. On Windows systems, a semicolon (';') is used as a separator. The data dictionary code will attempt to load each file specified in the DCMDICTPATH environment variable. It is an error if no data dictionary can be loaded.  

FILES

<etcdir>/dcmpstat.cfg, <etcdir>/printers.cfg - sample configuration files  

SEE ALSO

dcmprscu(1)  

COPYRIGHT

Copyright (C) 1999-2014 by OFFIS e.V., Escherweg 2, 26121 Oldenburg, Germany.


 

Index

NAME
SYNOPSIS
DESCRIPTION
PARAMETERS
OPTIONS
general options
processing options
spooling options
film orientation options
trim (border) options
requested decimate/crop behavior options
print presentation LUT options
basic film session options (only with &ndash;spool)
annotation options
overlay options
other print options
LOGGING
COMMAND LINE
ENVIRONMENT
FILES
SEE ALSO
COPYRIGHT