PCREGREP
Section: User Commands (1)
Updated: 03 April 2014
Page Index
NAME
pcregrep - a grep with Perl-compatible regular expressions.
SYNOPSIS
pcregrep [options] [long options] [pattern] [path1 path2 ...]
DESCRIPTION
pcregrep searches files for character patterns, in the same way as other
grep commands do, but it uses the PCRE regular expression library to support
patterns that are compatible with the regular expressions of Perl 5. See
pcresyntax(3)
for a quick-reference summary of pattern syntax, or
pcrepattern(3)
for a full description of the syntax and semantics of the regular expressions
that PCRE supports.
Patterns, whether supplied on the command line or in a separate file, are given
without delimiters. For example:
pcregrep Thursday /etc/motd
If you attempt to use delimiters (for example, by surrounding a pattern with
slashes, as is common in Perl scripts), they are interpreted as part of the
pattern. Quotes can of course be used to delimit patterns on the command line
because they are interpreted by the shell, and indeed quotes are required if a
pattern contains white space or shell metacharacters.
The first argument that follows any option settings is treated as the single
pattern to be matched when neither -e nor -f is present.
Conversely, when one or both of these options are used to specify patterns, all
arguments are treated as path names. At least one of -e, -f, or an
argument pattern must be provided.
If no files are specified, pcregrep reads the standard input. The
standard input can also be referenced by a name consisting of a single hyphen.
For example:
pcregrep some-pattern /file1 - /file3
By default, each line that matches a pattern is copied to the standard
output, and if there is more than one file, the file name is output at the
start of each line, followed by a colon. However, there are options that can
change how pcregrep behaves. In particular, the -M option makes it
possible to search for patterns that span line boundaries. What defines a line
boundary is controlled by the -N (--newline) option.
The amount of memory used for buffering files that are being scanned is
controlled by a parameter that can be set by the --buffer-size option.
The default value for this parameter is specified when pcregrep is built,
with the default default being 20K. A block of memory three times this size is
used (to allow for buffering "before" and "after" lines). An error occurs if a
line overflows the buffer.
Patterns can be no longer than 8K or BUFSIZ bytes, whichever is the greater.
BUFSIZ is defined in <stdio.h>. When there is more than one pattern
(specified by the use of -e and/or -f), each pattern is applied to
each line in the order in which they are defined, except that all the -e
patterns are tried before the -f patterns.
By default, as soon as one pattern matches a line, no further patterns are
considered. However, if --colour (or --color) is used to colour the
matching substrings, or if --only-matching, --file-offsets, or
--line-offsets is used to output only the part of the line that matched
(either shown literally, or as an offset), scanning resumes immediately
following the match, so that further matches on the same line can be found. If
there are multiple patterns, they are all tried on the remainder of the line,
but patterns that follow the one that matched are not tried on the earlier part
of the line.
This behaviour means that the order in which multiple patterns are specified
can affect the output when one of the above options is used. This is no longer
the same behaviour as GNU grep, which now manages to display earlier matches
for later patterns (as long as there is no overlap).
Patterns that can match an empty string are accepted, but empty string
matches are never recognized. An example is the pattern "(super)?(man)?", in
which all components are optional. This pattern finds all occurrences of both
"super" and "man"; the output differs from matching with "super|man" when only
the matching substrings are being shown.
If the LC_ALL or LC_CTYPE environment variable is set,
pcregrep uses the value to set a locale when calling the PCRE library.
The --locale option can be used to override this.
SUPPORT FOR COMPRESSED FILES
It is possible to compile pcregrep so that it uses libz or
libbz2 to read files whose names end in .gz or .bz2,
respectively. You can find out whether your binary has support for one or both
of these file types by running it with the --help option. If the
appropriate support is not present, files are treated as plain text. The
standard input is always so treated.
BINARY FILES
By default, a file that contains a binary zero byte within the first 1024 bytes
is identified as a binary file, and is processed specially. (GNU grep also
identifies binary files in this manner.) See the --binary-files option
for a means of changing the way binary files are handled.
OPTIONS
The order in which some of the options appear can affect the output. For
example, both the -h and -l options affect the printing of file
names. Whichever comes later in the command line will be the one that takes
effect. Similarly, except where noted below, if an option is given twice, the
later setting is used. Numerical values for options may be followed by K or M,
to signify multiplication by 1024 or 1024*1024 respectively.
- --
-
This terminates the list of options. It is useful if the next item on the
command line starts with a hyphen but is not an option. This allows for the
processing of patterns and filenames that start with hyphens.
- -A number, --after-context=number
-
Output number lines of context after each matching line. If filenames
and/or line numbers are being output, a hyphen separator is used instead of a
colon for the context lines. A line containing "--" is output between each
group of lines, unless they are in fact contiguous in the input file. The value
of number is expected to be relatively small. However, pcregrep
guarantees to have up to 8K of following text available for context output.
- -a, --text
-
Treat binary files as text. This is equivalent to
--binary-files=text.
- -B number, --before-context=number
-
Output number lines of context before each matching line. If filenames
and/or line numbers are being output, a hyphen separator is used instead of a
colon for the context lines. A line containing "--" is output between each
group of lines, unless they are in fact contiguous in the input file. The value
of number is expected to be relatively small. However, pcregrep
guarantees to have up to 8K of preceding text available for context output.
- --binary-files=word
-
Specify how binary files are to be processed. If the word is "binary" (the
default), pattern matching is performed on binary files, but the only output is
"Binary file <name> matches" when a match succeeds. If the word is "text",
which is equivalent to the -a or --text option, binary files are
processed in the same way as any other file. In this case, when a match
succeeds, the output may be binary garbage, which can have nasty effects if
sent to a terminal. If the word is "without-match", which is equivalent to the
-I option, binary files are not processed at all; they are assumed not to
be of interest.
- --buffer-size=number
-
Set the parameter that controls how much memory is used for buffering files
that are being scanned.
- -C number, --context=number
-
Output number lines of context both before and after each matching line.
This is equivalent to setting both -A and -B to the same value.
- -c, --count
-
Do not output individual lines from the files that are being scanned; instead
output the number of lines that would otherwise have been shown. If no lines
are selected, the number zero is output. If several files are are being
scanned, a count is output for each of them. However, if the
--files-with-matches option is also used, only those files whose counts
are greater than zero are listed. When -c is used, the -A,
-B, and -C options are ignored.
- --colour, --color
-
If this option is given without any data, it is equivalent to "--colour=auto".
If data is required, it must be given in the same shell item, separated by an
equals sign.
- --colour=value, --color=value
-
This option specifies under what circumstances the parts of a line that matched
a pattern should be coloured in the output. By default, the output is not
coloured. The value (which is optional, see above) may be "never", "always", or
"auto". In the latter case, colouring happens only if the standard output is
connected to a terminal. More resources are used when colouring is enabled,
because pcregrep has to search for all possible matches in a line, not
just one, in order to colour them all.
The colour that is used can be specified by setting the environment variable
PCREGREP_COLOUR or PCREGREP_COLOR. The value of this variable should be a
string of two numbers, separated by a semicolon. They are copied directly into
the control string for setting colour on a terminal, so it is your
responsibility to ensure that they make sense. If neither of the environment
variables is set, the default is "1;31", which gives red.
- -D action, --devices=action
-
If an input path is not a regular file or a directory, "action" specifies how
it is to be processed. Valid values are "read" (the default) or "skip"
(silently skip the path).
- -d action, --directories=action
-
If an input path is a directory, "action" specifies how it is to be processed.
Valid values are "read" (the default in non-Windows environments, for
compatibility with GNU grep), "recurse" (equivalent to the -r option), or
"skip" (silently skip the path, the default in Windows environments). In the
"read" case, directories are read as if they were ordinary files. In some
operating systems the effect of reading a directory like this is an immediate
end-of-file; in others it may provoke an error.
- -e pattern, --regex=pattern, --regexp=pattern
-
Specify a pattern to be matched. This option can be used multiple times in
order to specify several patterns. It can also be used as a way of specifying a
single pattern that starts with a hyphen. When -e is used, no argument
pattern is taken from the command line; all arguments are treated as file
names. There is no limit to the number of patterns. They are applied to each
line in the order in which they are defined until one matches.
If -f is used with -e, the command line patterns are matched first,
followed by the patterns from the file(s), independent of the order in which
these options are specified. Note that multiple use of -e is not the same
as a single pattern with alternatives. For example, X|Y finds the first
character in a line that is X or Y, whereas if the two patterns are given
separately, with X first, pcregrep finds X if it is present, even if it
follows Y in the line. It finds Y only if there is no X in the line. This
matters only if you are using -o or --colo(u)r to show the part(s)
of the line that matched.
- --exclude=pattern
-
Files (but not directories) whose names match the pattern are skipped without
being processed. This applies to all files, whether listed on the command line,
obtained from --file-list, or by scanning a directory. The pattern is a
PCRE regular expression, and is matched against the final component of the file
name, not the entire path. The -F, -w, and -x options do not
apply to this pattern. The option may be given any number of times in order to
specify multiple patterns. If a file name matches both an --include
and an --exclude pattern, it is excluded. There is no short form for this
option.
- --exclude-from=filename
-
Treat each non-empty line of the file as the data for an --exclude
option. What constitutes a newline when reading the file is the operating
system's default. The --newline option has no effect on this option. This
option may be given more than once in order to specify a number of files to
read.
- --exclude-dir=pattern
-
Directories whose names match the pattern are skipped without being processed,
whatever the setting of the --recursive option. This applies to all
directories, whether listed on the command line, obtained from
--file-list, or by scanning a parent directory. The pattern is a PCRE
regular expression, and is matched against the final component of the directory
name, not the entire path. The -F, -w, and -x options do not
apply to this pattern. The option may be given any number of times in order to
specify more than one pattern. If a directory matches both --include-dir
and --exclude-dir, it is excluded. There is no short form for this
option.
- -F, --fixed-strings
-
Interpret each data-matching pattern as a list of fixed strings, separated by
newlines, instead of as a regular expression. What constitutes a newline for
this purpose is controlled by the --newline option. The -w (match
as a word) and -x (match whole line) options can be used with -F.
They apply to each of the fixed strings. A line is selected if any of the fixed
strings are found in it (subject to -w or -x, if present). This
option applies only to the patterns that are matched against the contents of
files; it does not apply to patterns specified by any of the --include or
--exclude options.
- -f filename, --file=filename
-
Read patterns from the file, one per line, and match them against
each line of input. What constitutes a newline when reading the file is the
operating system's default. The --newline option has no effect on this
option. Trailing white space is removed from each line, and blank lines are
ignored. An empty file contains no patterns and therefore matches nothing. See
also the comments about multiple patterns versus a single pattern with
alternatives in the description of -e above.
If this option is given more than once, all the specified files are
read. A data line is output if any of the patterns match it. A filename can
be given as "-" to refer to the standard input. When -f is used, patterns
specified on the command line using -e may also be present; they are
tested before the file's patterns. However, no other pattern is taken from the
command line; all arguments are treated as the names of paths to be searched.
- --file-list=filename
-
Read a list of files and/or directories that are to be scanned from the given
file, one per line. Trailing white space is removed from each line, and blank
lines are ignored. These paths are processed before any that are listed on the
command line. The filename can be given as "-" to refer to the standard input.
If --file and --file-list are both specified as "-", patterns are
read first. This is useful only when the standard input is a terminal, from
which further lines (the list of files) can be read after an end-of-file
indication. If this option is given more than once, all the specified files are
read.
- --file-offsets
-
Instead of showing lines or parts of lines that match, show each match as an
offset from the start of the file and a length, separated by a comma. In this
mode, no context is shown. That is, the -A, -B, and -C
options are ignored. If there is more than one match in a line, each of them is
shown separately. This option is mutually exclusive with --line-offsets
and --only-matching.
- -H, --with-filename
-
Force the inclusion of the filename at the start of output lines when searching
a single file. By default, the filename is not shown in this case. For matching
lines, the filename is followed by a colon; for context lines, a hyphen
separator is used. If a line number is also being output, it follows the file
name.
- -h, --no-filename
-
Suppress the output filenames when searching multiple files. By default,
filenames are shown when multiple files are searched. For matching lines, the
filename is followed by a colon; for context lines, a hyphen separator is used.
If a line number is also being output, it follows the file name.
- --help
-
Output a help message, giving brief details of the command options and file
type support, and then exit. Anything else on the command line is
ignored.
- -I
-
Treat binary files as never matching. This is equivalent to
--binary-files=without-match.
- -i, --ignore-case
-
Ignore upper/lower case distinctions during comparisons.
- --include=pattern
-
If any --include patterns are specified, the only files that are
processed are those that match one of the patterns (and do not match an
--exclude pattern). This option does not affect directories, but it
applies to all files, whether listed on the command line, obtained from
--file-list, or by scanning a directory. The pattern is a PCRE regular
expression, and is matched against the final component of the file name, not
the entire path. The -F, -w, and -x options do not apply to
this pattern. The option may be given any number of times. If a file name
matches both an --include and an --exclude pattern, it is excluded.
There is no short form for this option.
- --include-from=filename
-
Treat each non-empty line of the file as the data for an --include
option. What constitutes a newline for this purpose is the operating system's
default. The --newline option has no effect on this option. This option
may be given any number of times; all the files are read.
- --include-dir=pattern
-
If any --include-dir patterns are specified, the only directories that
are processed are those that match one of the patterns (and do not match an
--exclude-dir pattern). This applies to all directories, whether listed
on the command line, obtained from --file-list, or by scanning a parent
directory. The pattern is a PCRE regular expression, and is matched against the
final component of the directory name, not the entire path. The -F,
-w, and -x options do not apply to this pattern. The option may be
given any number of times. If a directory matches both --include-dir and
--exclude-dir, it is excluded. There is no short form for this option.
- -L, --files-without-match
-
Instead of outputting lines from the files, just output the names of the files
that do not contain any lines that would have been output. Each file name is
output once, on a separate line.
- -l, --files-with-matches
-
Instead of outputting lines from the files, just output the names of the files
containing lines that would have been output. Each file name is output
once, on a separate line. Searching normally stops as soon as a matching line
is found in a file. However, if the -c (count) option is also used,
matching continues in order to obtain the correct count, and those files that
have at least one match are listed along with their counts. Using this option
with -c is a way of suppressing the listing of files with no matches.
- --label=name
-
This option supplies a name to be used for the standard input when file names
are being output. If not supplied, "(standard input)" is used. There is no
short form for this option.
- --line-buffered
-
When this option is given, input is read and processed line by line, and the
output is flushed after each write. By default, input is read in large chunks,
unless pcregrep can determine that it is reading from a terminal (which
is currently possible only in Unix-like environments). Output to terminal is
normally automatically flushed by the operating system. This option can be
useful when the input or output is attached to a pipe and you do not want
pcregrep to buffer up large amounts of data. However, its use will affect
performance, and the -M (multiline) option ceases to work.
- --line-offsets
-
Instead of showing lines or parts of lines that match, show each match as a
line number, the offset from the start of the line, and a length. The line
number is terminated by a colon (as usual; see the -n option), and the
offset and length are separated by a comma. In this mode, no context is shown.
That is, the -A, -B, and -C options are ignored. If there is
more than one match in a line, each of them is shown separately. This option is
mutually exclusive with --file-offsets and --only-matching.
- --locale=locale-name
-
This option specifies a locale to be used for pattern matching. It overrides
the value in the LC_ALL or LC_CTYPE environment variables. If no
locale is specified, the PCRE library's default (usually the "C" locale) is
used. There is no short form for this option.
- --match-limit=number
-
Processing some regular expression patterns can require a very large amount of
memory, leading in some cases to a program crash if not enough is available.
Other patterns may take a very long time to search for all possible matching
strings. The pcre_exec() function that is called by pcregrep to do
the matching has two parameters that can limit the resources that it uses.
The --match-limit option provides a means of limiting resource usage
when processing patterns that are not going to match, but which have a very
large number of possibilities in their search trees. The classic example is a
pattern that uses nested unlimited repeats. Internally, PCRE uses a function
called match() which it calls repeatedly (sometimes recursively). The
limit set by --match-limit is imposed on the number of times this
function is called during a match, which has the effect of limiting the amount
of backtracking that can take place.
The --recursion-limit option is similar to --match-limit, but
instead of limiting the total number of times that match() is called, it
limits the depth of recursive calls, which in turn limits the amount of memory
that can be used. The recursion depth is a smaller number than the total number
of calls, because not all calls to match() are recursive. This limit is
of use only if it is set smaller than --match-limit.
There are no short forms for these options. The default settings are specified
when the PCRE library is compiled, with the default default being 10 million.
- -M, --multiline
-
Allow patterns to match more than one line. When this option is given, patterns
may usefully contain literal newline characters and internal occurrences of ^
and $ characters. The output for a successful match may consist of more than
one line, the last of which is the one in which the match ended. If the matched
string ends with a newline sequence the output ends at the end of that line.
When this option is set, the PCRE library is called in "multiline" mode.
There is a limit to the number of lines that can be matched, imposed by the way
that pcregrep buffers the input file as it scans it. However,
pcregrep ensures that at least 8K characters or the rest of the document
(whichever is the shorter) are available for forward matching, and similarly
the previous 8K characters (or all the previous characters, if fewer than 8K)
are guaranteed to be available for lookbehind assertions. This option does not
work when input is read line by line (see --line-buffered.)
- -N newline-type, --newline=newline-type
-
The PCRE library supports five different conventions for indicating
the ends of lines. They are the single-character sequences CR (carriage return)
and LF (linefeed), the two-character sequence CRLF, an "anycrlf" convention,
which recognizes any of the preceding three types, and an "any" convention, in
which any Unicode line ending sequence is assumed to end a line. The Unicode
sequences are the three just mentioned, plus VT (vertical tab, U+000B), FF
(form feed, U+000C), NEL (next line, U+0085), LS (line separator, U+2028), and
PS (paragraph separator, U+2029).
When the PCRE library is built, a default line-ending sequence is specified.
This is normally the standard sequence for the operating system. Unless
otherwise specified by this option, pcregrep uses the library's default.
The possible values for this option are CR, LF, CRLF, ANYCRLF, or ANY. This
makes it possible to use pcregrep to scan files that have come from other
environments without having to modify their line endings. If the data that is
being scanned does not agree with the convention set by this option,
pcregrep may behave in strange ways. Note that this option does not
apply to files specified by the -f, --exclude-from, or
--include-from options, which are expected to use the operating system's
standard newline sequence.
- -n, --line-number
-
Precede each output line by its line number in the file, followed by a colon
for matching lines or a hyphen for context lines. If the filename is also being
output, it precedes the line number. This option is forced if
--line-offsets is used.
- --no-jit
-
If the PCRE library is built with support for just-in-time compiling (which
speeds up matching), pcregrep automatically makes use of this, unless it
was explicitly disabled at build time. This option can be used to disable the
use of JIT at run time. It is provided for testing and working round problems.
It should never be needed in normal use.
- -o, --only-matching
-
Show only the part of the line that matched a pattern instead of the whole
line. In this mode, no context is shown. That is, the -A, -B, and
-C options are ignored. If there is more than one match in a line, each
of them is shown separately. If -o is combined with -v (invert the
sense of the match to find non-matching lines), no output is generated, but the
return code is set appropriately. If the matched portion of the line is empty,
nothing is output unless the file name or line number are being printed, in
which case they are shown on an otherwise empty line. This option is mutually
exclusive with --file-offsets and --line-offsets.
- -onumber, --only-matching=number
-
Show only the part of the line that matched the capturing parentheses of the
given number. Up to 32 capturing parentheses are supported, and -o0 is
equivalent to -o without a number. Because these options can be given
without an argument (see above), if an argument is present, it must be given in
the same shell item, for example, -o3 or --only-matching=2. The comments given
for the non-argument case above also apply to this case. If the specified
capturing parentheses do not exist in the pattern, or were not set in the
match, nothing is output unless the file name or line number are being printed.
If this option is given multiple times, multiple substrings are output, in the
order the options are given. For example, -o3 -o1 -o3 causes the substrings
matched by capturing parentheses 3 and 1 and then 3 again to be output. By
default, there is no separator (but see the next option).
- --om-separator=text
-
Specify a separating string for multiple occurrences of -o. The default
is an empty string. Separating strings are never coloured.
- -q, --quiet
-
Work quietly, that is, display nothing except error messages. The exit
status indicates whether or not any matches were found.
- -r, --recursive
-
If any given path is a directory, recursively scan the files it contains,
taking note of any --include and --exclude settings. By default, a
directory is read as a normal file; in some operating systems this gives an
immediate end-of-file. This option is a shorthand for setting the -d
option to "recurse".
- --recursion-limit=number
-
See --match-limit above.
- -s, --no-messages
-
Suppress error messages about non-existent or unreadable files. Such files are
quietly skipped. However, the return code is still 2, even if matches were
found in other files.
- -u, --utf-8
-
Operate in UTF-8 mode. This option is available only if PCRE has been compiled
with UTF-8 support. All patterns (including those for any --exclude and
--include options) and all subject lines that are scanned must be valid
strings of UTF-8 characters.
- -V, --version
-
Write the version numbers of pcregrep and the PCRE library to the
standard output and then exit. Anything else on the command line is
ignored.
- -v, --invert-match
-
Invert the sense of the match, so that lines which do not match any of
the patterns are the ones that are found.
- -w, --word-regex, --word-regexp
-
Force the patterns to match only whole words. This is equivalent to having \b
at the start and end of the pattern. This option applies only to the patterns
that are matched against the contents of files; it does not apply to patterns
specified by any of the --include or --exclude options.
- -x, --line-regex, --line-regexp
-
Force the patterns to be anchored (each must start matching at the beginning of
a line) and in addition, require them to match entire lines. This is equivalent
to having ^ and $ characters at the start and end of each alternative branch in
every pattern. This option applies only to the patterns that are matched
against the contents of files; it does not apply to patterns specified by any
of the --include or --exclude options.
ENVIRONMENT VARIABLES
The environment variables LC_ALL and LC_CTYPE are examined, in that
order, for a locale. The first one that is set is used. This can be overridden
by the --locale option. If no locale is set, the PCRE library's default
(usually the "C" locale) is used.
NEWLINES
The -N (--newline) option allows pcregrep to scan files with
different newline conventions from the default. Any parts of the input files
that are written to the standard output are copied identically, with whatever
newline sequences they have in the input. However, the setting of this option
does not affect the interpretation of files specified by the -f,
--exclude-from, or --include-from options, which are assumed to use
the operating system's standard newline sequence, nor does it affect the way in
which pcregrep writes informational messages to the standard error and
output streams. For these it uses the string "\n" to indicate newlines,
relying on the C I/O library to convert this to an appropriate sequence.
OPTIONS COMPATIBILITY
Many of the short and long forms of pcregrep's options are the same
as in the GNU grep program. Any long option of the form
--xxx-regexp (GNU terminology) is also available as --xxx-regex
(PCRE terminology). However, the --file-list, --file-offsets,
--include-dir, --line-offsets, --locale, --match-limit,
-M, --multiline, -N, --newline, --om-separator,
--recursion-limit, -u, and --utf-8 options are specific to
pcregrep, as is the use of the --only-matching option with a
capturing parentheses number.
Although most of the common options work the same way, a few are different in
pcregrep. For example, the --include option's argument is a glob
for GNU grep, but a regular expression for pcregrep. If both the
-c and -l options are given, GNU grep lists only file names,
without counts, but pcregrep gives the counts.
OPTIONS WITH DATA
There are four different ways in which an option with data can be specified.
If a short form option is used, the data may follow immediately, or (with one
exception) in the next command line item. For example:
-f/some/file
-f /some/file
The exception is the -o option, which may appear with or without data.
Because of this, if data is present, it must follow immediately in the same
item, for example -o3.
If a long form option is used, the data may appear in the same command line
item, separated by an equals character, or (with two exceptions) it may appear
in the next command line item. For example:
--file=/some/file
--file /some/file
Note, however, that if you want to supply a file name beginning with ~ as data
in a shell command, and have the shell expand ~ to a home directory, you must
separate the file name from the option, because the shell does not treat ~
specially unless it is at the start of an item.
The exceptions to the above are the --colour (or --color) and
--only-matching options, for which the data is optional. If one of these
options does have data, it must be given in the first form, using an equals
character. Otherwise pcregrep will assume that it has no data.
MATCHING ERRORS
It is possible to supply a regular expression that takes a very long time to
fail to match certain lines. Such patterns normally involve nested indefinite
repeats, for example: (a+)*\d when matched against a line of a's with no final
digit. The PCRE matching function has a resource limit that causes it to abort
in these circumstances. If this happens, pcregrep outputs an error
message and the line that caused the problem to the standard error stream. If
there are more than 20 such errors, pcregrep gives up.
The --match-limit option of pcregrep can be used to set the overall
resource limit; there is a second option called --recursion-limit that
sets a limit on the amount of memory (usually stack) that is used (see the
discussion of these options above).
DIAGNOSTICS
Exit status is 0 if any matches were found, 1 if no matches were found, and 2
for syntax errors, overlong lines, non-existent or inaccessible files (even if
matches were found in other files) or too many matching errors. Using the
-s option to suppress error messages about inaccessible files does not
affect the return code.
SEE ALSO
pcrepattern(3), pcresyntax(3), pcretest(1).
AUTHOR
Philip Hazel
University Computing Service
Cambridge CB2 3QH, England.
REVISION
Last updated: 03 April 2014
Copyright (c) 1997-2014 University of Cambridge.