QMI-FIRMWARE-UPDATE

Section: User Commands (1)
Updated: January 2021
Page Index

NAME

qmi-firmware-update - Update firmware in QMI devices

DESCRIPTION

Usage:

: lt-qmi-firmware-update [OPTION?] FILE1 FILE2... - Update firmware in QMI devices

Generic device selection options:

-s, --busnum-devnum=,[BUS/:]DEV: Select device by bus and device number (in decimal).
-d, --vid-pid=,VID[/:PID]: Select device by device vendor and product id (in hexadecimal).
-w, --cdc-wdm=,[PATH]/: Select device by QMI/MBIM cdc-wdm device path (e.g. ,/dev/cdc-wdm0/).
-t, --tty=,[PATH]/: Select device by serial device path (e.g. ,/dev/ttyUSB2/).

Update options (normal mode):

-u, --update: Launch firmware update process.
-f, --firmware-version=,[VERSION]/: Firmware version (e.g. '05.05.58.00').
-c, --config-version=,[VERSION]/: Config version (e.g. '005.025_002').
-C, --carrier=,[CARRIER]/: Carrier name (e.g. 'Generic').
--ignore-version-errors: Run update operation even with version string errors.
--override-download: Download images even if module says it already has them.
--modem-storage-index=,[INDEX]/: Index storage for the modem image.
--skip-validation: Don't wait to validate the running firmware after update.

Reset options (normal mode):

-b, --reset: Reset device into download mode.

Update options (download mode):

-U, --update-download: Launch firmware update process while in download (boot & hold) mode.

Verify options:

-z, --verify: Analyze and verify firmware images.

Application Options:

-p, --device-open-proxy: Request to use the 'qmi-proxy' proxy.
--device-open-qmi: Open a cdc-wdm device explicitly in QMI mode
--device-open-mbim: Open a cdc-wdm device explicitly in MBIM mode
--device-open-auto: Open a cdc-wdm device in either QMI or MBIM mode (default)
--ignore-mm-runtime-check: Ignore ModemManager runtime check
-v, --verbose: Run action with verbose messages in standard output, including the debug ones.
-S, --silent: Run action with no messages in standard output; not even the error ones.
-L, --verbose-log=,[PATH]/: Write verbose messages to an output file.
-V, --version: Print version.
-h, --help: Show help.
-H, --help-examples: Show help examples.
***************************************************************************: Warning!
: ***************************************************************************
: Use this program with caution. The authors take *no* responsibility if any device gets broken as a result of using this program.
: Please report issues to the libqmi mailing list at:
: libqmi-devel@lists.freedesktop.org

qmi-firmware-update 1.26.8

: Copyright (C) 2016-2020 Aleksander Morgado Copyright (C) 2016-2019 Bj?rn Mork Copyright (C) 2016-2018 Zodiac Inflight Innovations

License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.