QMI-NETWORK

Section: User Commands (1)
Updated: January 2021
Page Index
 

NAME

qmi-network - Simple network management of QMI devices  

SYNOPSIS

qmi-network [,OPTIONS/] [,DEVICE/] [,COMMAND/]  

DESCRIPTION

Simple network management of QMI devices  

Commands:

start
Start network connection
stop
Stop network connection
status
Query network connection status
 

OPTIONS

--profile=,[PATH]/
Use the profile in the specified path
--help
Show help options
--version
Show version

Notes:

1) [DEVICE] is given as the full path to the cdc-wdm character device, e.g.:
,/dev/cdc-wdm0/
2) The qmi-network script requires a profile to work. Unless explicitly specified with `--profile', the file is assumed to be available in the following path:
,/etc/qmi-network.conf/
3) The APN to use should be configured in the profile, in the following way (e.g. assuming APN is called 'internet'):
APN=internet
4) Optional APN user/password strings may be given in the following way:
APN_USER=user APN_PASS=password
5) If you want to instruct the qmi-network script to use the qmi-proxy setup, you can do so by configuring the following line in the profile:
PROXY=yes
6) Once the qmi-network script reports a successful connection you still need to run a DHCP client on the associated WWAN network interface.
 

COPYRIGHT

Copyright © 2013-2018 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.  

SEE ALSO

The full documentation for qmi-network is maintained as a Texinfo manual. If the info and qmi-network programs are properly installed at your site, the command
info qmi-network

should give you access to the complete manual.


 

Index

NAME
SYNOPSIS
DESCRIPTION
Commands:
OPTIONS
COPYRIGHT
SEE ALSO