ps [-aA] [-defl] [-g grouplist] [-G grouplist]
[-n namelist] [-o format]... [-p proclist] [-t termlist]
[-u userlist] [-U userlist]
By default, ps shall select all processes with the same effective user ID as the current user and the same controlling terminal as the invoker.
The following options shall be supported:
With the exception of -f, -l, -n namelist, and -o format, all of the options shown are used to select processes. If any are specified, the default list shall be ignored and ps shall select the processes represented by the inclusive OR of all the selection-criteria options.
On XSI-conformant systems, the output format shall be as follows. The column headings and descriptions of the columns in a ps listing are given below. The precise meanings of these fields are implementation-defined. The letters 'f' and 'l' (below) indicate the option (full or long) that shall cause the corresponding heading to appear; all means that the heading always appears. Note that these two options determine only what information is provided for a process; they do not determine which processes are listed.
| F | (l) |
Flags (octal and additive) associated with the process.
|
| S | (l) | The state of the process. |
| UID | (f,l) |
The user ID number of the process owner; the login name is printed
under the
-f
option.
|
| PID | (all) |
The process ID of the process; it is possible to kill a process if this
datum is known.
|
| PPID | (f,l) | The process ID of the parent process. |
| C | (f,l) | Processor utilization for scheduling. |
| PRI | (l) |
The priority of the process; higher numbers mean lower priority.
|
| NI | (l) |
Nice value; used in priority computation.
|
| ADDR | (l) | The address of the process. |
| SZ | (l) |
The size in blocks of the core image of the process.
|
| WCHAN | (l) |
The event for which the process is waiting or sleeping; if blank, the
process is running.
|
| STIME | (f) | Starting time of the process. |
| TTY | (all) | The controlling terminal for the process. |
| TIME | (all) |
The cumulative execution time for the process.
|
| CMD | (all) |
The command name; the full command name and its arguments are written
under the
-f
option.
|
A process that has exited and has a parent, but has not yet been waited for by the parent, shall be marked defunct.
Under the option -f, ps tries to determine the command name and arguments given when the process was created by examining memory or the swap area. Failing this, the command name, as it would appear without the option -f, is written in square brackets.
The -o option allows the output format to be specified under user control.
The application shall ensure that the format specification is a list of names presented as a single argument, <blank> or <comma>-separated. Each variable has a default header. The default header can be overridden by appending an <equals-sign> and the new text of the header. The rest of the characters in the argument shall be used as the header text. The fields specified shall be written in the order specified on the command line, and should be arranged in columns in the output. The field widths shall be selected by the system to be at least as wide as the header text (default or overridden value). If the header text is null, such as -o user=, the field width shall be at least as wide as the default header text. If all header text fields are null, no header line shall be written.
The following names are recognized in the POSIX locale:
[[dd-]hh:]mm:ss
where dd shall represent the number of days, hh the number of hours, mm the number of minutes, and ss the number of seconds. The dd field shall be a decimal integer. The hh, mm, and ss fields shall be two-digit decimal integers padded on the left with zeros.
[dd-]hh:mm:ss
The dd, hh, mm, and ss fields shall be as described in the etime specifier.
Any field need not be meaningful in all implementations. In such a case a <hyphen-minus> ('-') should be output in place of the field value.
Only comm and args shall be allowed to contain <blank> characters; all others shall not. Any implementation-defined variables shall be specified in the system documentation along with the default header and indicating whether the field may contain <blank> characters.
The following table specifies the default header to be used in the
POSIX locale corresponding to each format specifier.
| ||||||||||||||||||||||||||||||||||||||||
The following sections are informative.
The args format specifier is allowed to produce a truncated version of the command arguments. In some implementations, this information is no longer available when the ps utility is executed.
If the field width is too narrow to display a textual ID, the system may use a numeric version. Normally, the system would be expected to choose large enough field widths, but if a large number of fields were selected to write, it might squeeze fields to their minimum sizes to fit on one line. One way to ensure adequate width for the textual IDs is to override the default header for a field to make it larger than most or all user or group names.
There is no special quoting mechanism for header text. The header text is the rest of the argument. If multiple header changes are needed, multiple -o options can be used, such as:
ps -o "user=User Name" -o pid=Process\ ID
On some implementations, especially multi-level secure systems, ps may be severely restricted and produce information only about child processes owned by the user.
ps -o user,pid,ppid=MOM -o args
writes at least the following in the POSIX locale:
USER PID MOM COMMAND helene 34 12 ps -o uid,pid,ppid=MOM -o args
The contents of the COMMAND field need not be the same in all implementations, due to possible truncation.
It is recognized that on some implementations, especially multi-level secure systems, ps may be nearly useless. The default output has therefore been chosen such that it does not break historical implementations and also is likely to provide at least some useful information on most systems.
The major change is the addition of the format specification capability. The motivation for this invention is to provide a mechanism for users to access a wider range of system information, if the system permits it, in a portable manner. The fields chosen to appear in this volume of POSIX.1-2017 were arrived at after considering what concepts were likely to be both reasonably useful to the ``average'' user and had a reasonable chance of being implemented on a wide range of systems. Again it is recognized that not all systems are able to provide all the information and, conversely, some may wish to provide more. It is hoped that the approach adopted will be sufficiently flexible and extensible to accommodate most systems. Implementations may be expected to introduce new format specifiers.
The default output should consist of a short listing containing the process ID, terminal name, cumulative execution time, and command name of each process.
The preference of the standard developers would have been to make the format specification an operand of the ps command. Unfortunately, BSD usage precluded this.
At one time a format was included to display the environment array of the process. This was deleted because there is no portable way to display it.
The -A option is equivalent to the BSD -g and the SVID -e. Because the two systems differed, a mnemonic compromise was selected.
The -a option is described with some optional behavior because the SVID omits session leaders, but BSD does not.
In an early proposal, format specifiers appeared for priority and start time. The former was not defined adequately in this volume of POSIX.1-2017 and was removed in deference to the defined nice value; the latter because elapsed time was considered to be more useful.
In a new BSD version of ps, a -O option can be used to write all of the default information, followed by additional format specifiers. This was not adopted because the default output is implementation-defined. Nevertheless, this is a useful option that should be reserved for that purpose. In the -o option for the POSIX Shell and Utilities ps, the format is the concatenation of each -o. Therefore, the user can have an alias or function that defines the beginning of their desired format and add more fields to the end of the output in certain cases where that would be useful.
The format of the terminal name is unspecified, but the descriptions of ps, talk, who, and write require that they all use the same format.
The pcpu field indicates that the CPU time available is determined in an unspecified manner. This is because it is difficult to express an algorithm that is useful across all possible machine architectures. Historical counterparts to this value have attempted to show percentage of use in the recent past, such as the preceding minute. Frequently, these values for all processes did not add up to 100%. Implementations are encouraged to provide data in this field to users that will help them identify processes currently affecting the performance of the system.
The Base Definitions volume of POSIX.1-2017, Chapter 8, Environment Variables, Section 12.2, Utility Syntax Guidelines
Any typographical or formatting errors that appear in this page are most likely to have been introduced during the conversion of the source files to man page format. To report such errors, see https://www.kernel.org/doc/man-pages/reporting_bugs.html .