package Pod::SomeFormatter;
use Pod::Simple;
@ISA = qw(Pod::Simple);
$VERSION = '1.01';
use strict;
sub _handle_element_start {
my($parser, $element_name, $attr_hash_r) = @_;
...
}
sub _handle_element_end {
my($parser, $element_name, $attr_hash_r) = @_;
# NOTE: $attr_hash_r is only present when $element_name is "over" or "begin"
# The remaining code excerpts will mostly ignore this $attr_hash_r, as it is
# mostly useless. It is documented where "over-*" and "begin" events are
# documented.
...
}
sub _handle_text {
my($parser, $text) = @_;
...
}
1;
The zeroeth step in writing a Pod formatter is to make sure that there isn't already a decent one in CPAN. See <http://search.cpan.org/>, and run a search on the name of the format you want to render to. Also consider joining the Pod People list <http://lists.perl.org/showlist.cgi?name=pod-people> and asking whether anyone has a formatter for that format --- maybe someone cobbled one together but just hasn't released it.
The first step in writing a Pod processor is to read perlpodspec, which contains information on writing a Pod parser (which has been largely taken care of by Pod::Simple), but also a lot of requirements and recommendations for writing a formatter.
The second step is to actually learn the format you're planning to format to --- or at least as much as you need to know to represent Pod, which probably isn't much.
The third step is to pick which of Pod::Simple's interfaces you want to use:
The last step is to write your code based on how the events (or tokens, or tree-nodes, or the XML, or however you're parsing) will map to constructs in the output format. Also be sure to consider how to escape text nodes containing arbitrary text, and what to do with text nodes that represent preformatted text (from verbatim sections).
In the following section, we use XML to represent the event structure associated with a particular construct. That is, TODO
TODO describe
<Document start_line="543">
...all events...
</Document>
The value of the start_line attribute will be the line number of the first Pod directive in the document.
If there is no Pod in the given document, then the event structure will be this:
<Document contentless="1" start_line="543"> </Document>
In that case, the value of the start_line attribute will not be meaningful; under current implementations, it will probably be the line number of the last line in the file.
<Para start_line="543">
...all events in this paragraph...
</Para>
The value of the start_line attribute will be the line number of the start of the paragraph.
For example, parsing this paragraph of Pod:
The value of the I<start_line> attribute will be the line number of the start of the paragraph.
produces this event structure:
<Para start_line="129">
The value of the
<I>
start_line
</I>
attribute will be the line number of the first Pod directive
in the document.
</Para>
<B>
...stuff...
</B>
Currently, there are no attributes conveyed.
Parsing C, F, or I codes produce the same structure, with only a different element name.
If your parser object has been set to accept other formatting codes, then they will be presented like these B/C/F/I codes --- i.e., without any attributes.
<S>
...stuff...
</S>
However, Pod::Simple (and presumably all derived parsers) offers the "nbsp_for_S" option which, if enabled, will suppress all S events, and instead change all spaces in the content to non-breaking spaces. This is intended for formatters that output to a format that has no code that means the same as S<...>, but which has a code/character that means non-breaking space.
<X>
...stuff...
</X>
However, Pod::Simple (and presumably all derived parsers) offers the "nix_X_codes" option which, if enabled, will suppress all X events and ignore their content. For formatters/processors that don't use X events, this is presumably quite useful.
There are, at first glance, three kinds of L links: URL, man, and pod.
When a L<some_url> code is parsed, it produces this event structure:
<L content-implicit="yes" raw="that_url" to="that_url" type="url">
that_url
</L>
The "type="url"" attribute is always specified for this type of L code.
For example, this Pod source:
L<http://www.perl.com/CPAN/authors/>
produces this event structure:
<L content-implicit="yes" raw="http://www.perl.com/CPAN/authors/" to="http://www.perl.com/CPAN/authors/" type="url"> http://www.perl.com/CPAN/authors/ </L>
When a L<manpage(section)> code is parsed (and these are fairly rare and not terribly useful), it produces this event structure:
<L content-implicit="yes" raw="manpage(section)" to="manpage(section)" type="man">
manpage(section)
</L>
The "type="man"" attribute is always specified for this type of L code.
For example, this Pod source:
L<crontab(5)>
produces this event structure:
<L content-implicit="yes" raw="crontab(5)" to="crontab(5)" type="man"> crontab(5) </L>
In the rare cases where a man page link has a section specified, that text appears in a section attribute. For example, this Pod source:
L<crontab(5)/"ENVIRONMENT">
will produce this event structure:
<L content-implicit="yes" raw="crontab(5)/"ENVIRONMENT"" section="ENVIRONMENT" to="crontab(5)" type="man"> "ENVIRONMENT" in crontab(5) </L>
In the rare case where the Pod document has code like L<sometext|manpage(section)>, then the sometext will appear as the content of the element, the manpage(section) text will appear only as the value of the to attribute, and there will be no "content-implicit="yes"" attribute (whose presence means that the Pod parser had to infer what text should appear as the link text --- as opposed to cases where that attribute is absent, which means that the Pod parser did not have to infer the link text, because that L code explicitly specified some link text.)
For example, this Pod source:
L<hell itself!|crontab(5)>
will produce this event structure:
<L raw="hell itself!|crontab(5)" to="crontab(5)" type="man"> hell itself! </L>
The last type of L structure is for links to/within Pod documents. It is the most complex because it can have a to attribute, or a section attribute, or both. The "type="pod"" attribute is always specified for this type of L code.
In the most common case, the simple case of a L<podpage> code produces this event structure:
<L content-implicit="yes" raw="podpage" to="podpage" type="pod">
podpage
</L>
For example, this Pod source:
L<Net::Ping>
produces this event structure:
<L content-implicit="yes" raw="Net::Ping" to="Net::Ping" type="pod">
Net::Ping
</L>
In cases where there is link-text explicitly specified, it is to be found in the content of the element (and not the attributes), just as with the L<sometext|manpage(section)> case discussed above. For example, this Pod source:
L<Perl Error Messages|perldiag>
produces this event structure:
<L raw="Perl Error Messages|perldiag" to="perldiag" type="pod">
Perl Error Messages
</L>
In cases of links to a section in the current Pod document, there is a section attribute instead of a to attribute. For example, this Pod source:
L</"Member Data">
produces this event structure:
<L content-implicit="yes" raw="/"Member Data"" section="Member Data" type="pod">
"Member Data"
</L>
As another example, this Pod source:
L<the various attributes|/"Member Data">
produces this event structure:
<L raw="the various attributes|/"Member Data"" section="Member Data" type="pod">
the various attributes
</L>
In cases of links to a section in a different Pod document, there are both a section attribute and a to attribute. For example, this Pod source:
L<perlsyn/"Basic BLOCKs and Switch Statements">
produces this event structure:
<L content-implicit="yes" raw="perlsyn/"Basic BLOCKs and Switch Statements"" section="Basic BLOCKs and Switch Statements" to="perlsyn" type="pod">
"Basic BLOCKs and Switch Statements" in perlsyn
</L>
As another example, this Pod source:
L<SWITCH statements|perlsyn/"Basic BLOCKs and Switch Statements">
produces this event structure:
<L raw="SWITCH statements|perlsyn/"Basic BLOCKs and Switch Statements"" section="Basic BLOCKs and Switch Statements" to="perlsyn" type="pod">
SWITCH statements
</L>
Incidentally, note that we do not distinguish between these syntaxes:
L</"Member Data"> L<"Member Data"> L</Member Data> L<Member Data> [deprecated syntax]
That is, they all produce the same event structure (for the most part), namely:
<L content-implicit="yes" raw="$depends_on_syntax" section="Member Data" type="pod">
"Member Data"
</L>
The raw attribute depends on what the raw content of the "L<>" is, so that is why the event structure is the same ``for the most part''.
If you have not guessed it yet, the raw attribute contains the raw, original, unescaped content of the "L<>" formatting code. In addition to the examples above, take notice of the following event structure produced by the following "L<>" formatting code.
L<click B<here>|page/About the C<-M> switch>
<L raw="click B<here>|page/About the C<-M> switch" section="About the -M switch" to="page" type="pod">
click B<here>
</L>
Specifically, notice that the formatting codes are present and unescaped in raw.
There is a known bug in the raw attribute where any surrounding whitespace is condensed into a single ' '. For example, given L< link>, raw will be `` link''.
<Verbatim start_line="543" xml:space="preserve">
...text...
</Verbatim>
The value of the start_line attribute will be the line number of the first line of this verbatim block. The xml:space attribute is always present, and always has the value ``preserve''.
The text content will have tabs already expanded.
<head1>
...stuff...
</head1>
For example, a directive consisting of this:
=head1 Options to C<new> et al.
will produce this event structure:
<head1 start_line="543">
Options to
<C>
new
</C>
et al.
</head1>
``=head2'' through ``=head4'' directives are the same, except for the element names in the event structure.
<over-bullet indent="4" start_line="543">
<item-bullet start_line="545">
...Stuff...
</item-bullet>
...more item-bullets...
</over-bullet fake-closer="1">
The attribute fake-closer is only present if it is a true value; it is not present if it is a false value. It is shown in the above example to illustrate where the attribute is (in the closing tag). It signifies that the "=over" did not have a matching "=back", and thus Pod::Simple had to create a fake closer.
For example, this Pod source:
=over =item * Something =back
Would produce an event structure that does not have the fake-closer attribute, whereas this Pod source:
=over =item * Gasp! An unclosed =over block!
would. The rest of the over-* examples will not demonstrate this attribute, but they all can have it. See Pod::Checker's source for an example of this attribute being used.
The value of the indent attribute is whatever value is after the ``=over'' directive, as in ``=over 8''. If no such value is specified in the directive, then the indent attribute has the value ``4''.
For example, this Pod source:
=over =item * Stuff =item * Bar I<baz>! =back
produces this event structure:
<over-bullet indent="4" start_line="10">
<item-bullet start_line="12">
Stuff
</item-bullet>
<item-bullet start_line="14">
Bar <I>baz</I>!
</item-bullet>
</over-bullet>
<over-number indent="4" start_line="543">
<item-number number="1" start_line="545">
...Stuff...
</item-number>
...more item-number...
</over-bullet>
This is like the ``over-bullet'' event structure; but note that the contents are ``item-number'' instead of ``item-bullet'', and note that they will have a ``number'' attribute, which some formatters/processors may ignore (since, for example, there's no need for it in HTML when producing an ``<UL><LI>...</LI>...</UL>'' structure), but which any processor may use.
Note that the values for the number attributes of ``item-number'' elements in a given ``over-number'' area will start at 1 and go up by one each time. If the Pod source doesn't follow that order (even though it really should!), whatever numbers it has will be ignored (with the correct values being put in the number attributes), and an error message might be issued to the user.
<over-text indent="4" start_line="543">
<item-text>
...stuff...
</item-text>
...stuff (generally Para or Verbatim elements)...
<item-text>
...more item-text and/or stuff...
</over-text>
The indent and fake-closer attributes are as with the other over-* events.
For example, this Pod source:
=over =item Foo Stuff =item Bar I<baz>! Quux =back
produces this event structure:
<over-text indent="4" start_line="20">
<item-text start_line="22">
Foo
</item-text>
<Para start_line="24">
Stuff
</Para>
<item-text start_line="26">
Bar
<I>
baz
</I>
!
</item-text>
<Para start_line="28">
Quux
</Para>
</over-text>
<over-block indent="4" start_line="543">
...stuff (generally Para or Verbatim elements)...
</over-block>
The indent and fake-closer attributes are as with the other over-* events.
For example, this Pod source:
=over For cutting off our trade with all parts of the world For transporting us beyond seas to be tried for pretended offenses He is at this time transporting large armies of foreign mercenaries to complete the works of death, desolation and tyranny, already begun with circumstances of cruelty and perfidy scarcely paralleled in the most barbarous ages, and totally unworthy the head of a civilized nation. =back
will produce this event structure:
<over-block indent="4" start_line="2">
<Para start_line="4">
For cutting off our trade with all parts of the world
</Para>
<Para start_line="6">
For transporting us beyond seas to be tried for pretended offenses
</Para>
<Para start_line="8">
He is at this time transporting large armies of [...more text...]
</Para>
</over-block>
These events are somewhat unlike the other over-* structures, as far as what their contents are. When an ``=over ... =back'' block is parsed where there is no content, it will produce this event structure:
<over-empty indent="4" start_line="543"> </over-empty>
The indent and fake-closer attributes are as with the other over-* events.
For example, this Pod source:
=over =over =back =back
will produce this event structure:
<over-block indent="4" start_line="1">
<over-empty indent="4" start_line="3">
</over-empty>
</over-block>
Note that the outer "=over" is a block because it has no "=item"s but still has content: the inner "=over". The inner "=over", in turn, is completely empty, and is treated as such.
=for html <img src="fig1.jpg">
or
=begin html
<img src="fig1.jpg">
=end html
...the parser will ignore these sections unless your subclass has specified that it wants to see sections targeted to ``html'' (or whatever the formatter name is).
If you want to process all sections, even if they're not targeted for you, call this before you start parsing:
$parser->accept_targets('*');
At time of writing, I don't think you'll need to use this.
$parser->accept_codes( qw( N R W ) );
TODO: document how this interacts with =extend, and long element names
For example, to accept a new directive ``=method'', you'd presumably use:
$parser->accept_directive_as_processed("method");
so that you could have Pod lines like:
=method I<$whatever> thing B<um>
Making up your own directives breaks compatibility with other Pod formatters, in a way that using "=for target ..." lines doesn't; however, you may find this useful if you're making a Pod superset format where you don't need to worry about compatibility.
I like S<Dutch apple pie>, don't you?
and treat it as if it were:
I like DutchE<nbsp>appleE<nbsp>pie, don't you?
This is handy for output formats that don't have anything quite like an ``S<...>'' code, but which do have a code for non-breaking space.
There is currently no method for going the other way; but I can probably provide one upon request.
print OUT "<!-- \n", $parser->version_report, "\n -->";
I just LOVE Z<>hotE<32>apple pie!
When that is parsed and events are about to be called on it, it may actually seem to be four different text events, one right after another: one event for ``I just LOVE '', one for ``hot'', one for `` '', and one for ``apple pie!''. But if you have merge_text on, then you're guaranteed that it will be fired as one text event: ``I just LOVE hot apple pie!''.
sub get_code_line { # or whatever you'll call it
my($line, $line_number, $parser) = @_;
...
}
Note, however, that sometimes the Pod events aren't processed in exactly the same order as the code lines are --- i.e., if you have a file with Pod, then code, then more Pod, sometimes the code will be processed (via whatever you have code_handler call) before the all of the preceding Pod has been processed.
If you want to set this to true, you should probably also set "no_whining" or at least "no_errata_section" to true.
Pod::Simple::Methody --- like Pod::Simple, but each sort of event calls its own method (like "start_head3")
Pod::Simple::PullParser --- a Pod-parsing framework like Pod::Simple, but with a token-stream interface
Pod::Simple::SimpleTree --- a Pod-parsing framework like Pod::Simple, but with a tree interface
Pod::Simple::Checker --- a simple Pod::Simple subclass that reads documents, and then makes a plaintext report of any errors found in the document
Pod::Simple::DumpAsXML --- for dumping Pod documents as tidily indented XML, showing each event on its own line
Pod::Simple::XMLOutStream --- dumps a Pod document as XML (without introducing extra whitespace as Pod::Simple::DumpAsXML does).
Pod::Simple::DumpAsText --- for dumping Pod documents as tidily indented text, showing each event on its own line
Pod::Simple::LinkSection --- class for objects representing the values of the TODO and TODO attributes of L<...> elements
Pod::Escapes --- the module that Pod::Simple uses for evaluating E<...> content
Pod::Simple::Text --- a simple plaintext formatter for Pod
Pod::Simple::TextContent --- like Pod::Simple::Text, but makes no effort for indent or wrap the text being formatted
Pod::Simple::HTML --- a simple HTML formatter for Pod
perlpod
perlpodspec
This module is managed in an open GitHub repository, <https://github.com/perl-pod/pod-simple/>. Feel free to fork and contribute, or to clone <git://github.com/perl-pod/pod-simple.git> and send patches!
Patches against Pod::Simple are welcome. Please send bug reports to <bug-pod-simple@rt.cpan.org>.
This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
This program is distributed in the hope that it will be useful, but without any warranty; without even the implied warranty of merchantability or fitness for a particular purpose.
Pod::Simple is maintained by: