ctrevc3.f

Section: LAPACK (3)
Updated: Tue Nov 14 2017
Page Index
 

NAME

ctrevc3.f  

SYNOPSIS


 

Functions/Subroutines


subroutine ctrevc3 (SIDE, HOWMNY, SELECT, N, T, LDT, VL, LDVL, VR, LDVR, MM, M, WORK, LWORK, RWORK, LRWORK, INFO)
CTREVC3  

Function/Subroutine Documentation

 

subroutine ctrevc3 (character SIDE, character HOWMNY, logical, dimension( * ) SELECT, integer N, complex, dimension( ldt, * ) T, integer LDT, complex, dimension( ldvl, * ) VL, integer LDVL, complex, dimension( ldvr, * ) VR, integer LDVR, integer MM, integer M, complex, dimension( * ) WORK, integer LWORK, real, dimension( * ) RWORK, integer LRWORK, integer INFO)

CTREVC3

Purpose:

 CTREVC3 computes some or all of the right and/or left eigenvectors of
 a complex upper triangular matrix T.
 Matrices of this type are produced by the Schur factorization of
 a complex general matrix:  A = Q*T*Q**H, as computed by CHSEQR.

 The right eigenvector x and the left eigenvector y of T corresponding
 to an eigenvalue w are defined by:

              T*x = w*x,     (y**H)*T = w*(y**H)

 where y**H denotes the conjugate transpose of the vector y.
 The eigenvalues are not input to this routine, but are read directly
 from the diagonal of T.

 This routine returns the matrices X and/or Y of right and left
 eigenvectors of T, or the products Q*X and/or Q*Y, where Q is an
 input matrix. If Q is the unitary factor that reduces a matrix A to
 Schur form T, then Q*X and Q*Y are the matrices of right and left
 eigenvectors of A.

 This uses a Level 3 BLAS version of the back transformation.


 

Parameters:

SIDE

          SIDE is CHARACTER*1
          = 'R':  compute right eigenvectors only;
          = 'L':  compute left eigenvectors only;
          = 'B':  compute both right and left eigenvectors.


HOWMNY

          HOWMNY is CHARACTER*1
          = 'A':  compute all right and/or left eigenvectors;
          = 'B':  compute all right and/or left eigenvectors,
                  backtransformed using the matrices supplied in
                  VR and/or VL;
          = 'S':  compute selected right and/or left eigenvectors,
                  as indicated by the logical array SELECT.


SELECT

          SELECT is LOGICAL array, dimension (N)
          If HOWMNY = 'S', SELECT specifies the eigenvectors to be
          computed.
          The eigenvector corresponding to the j-th eigenvalue is
          computed if SELECT(j) = .TRUE..
          Not referenced if HOWMNY = 'A' or 'B'.


N

          N is INTEGER
          The order of the matrix T. N >= 0.


T

          T is COMPLEX array, dimension (LDT,N)
          The upper triangular matrix T.  T is modified, but restored
          on exit.


LDT

          LDT is INTEGER
          The leading dimension of the array T. LDT >= max(1,N).


VL

          VL is COMPLEX array, dimension (LDVL,MM)
          On entry, if SIDE = 'L' or 'B' and HOWMNY = 'B', VL must
          contain an N-by-N matrix Q (usually the unitary matrix Q of
          Schur vectors returned by CHSEQR).
          On exit, if SIDE = 'L' or 'B', VL contains:
          if HOWMNY = 'A', the matrix Y of left eigenvectors of T;
          if HOWMNY = 'B', the matrix Q*Y;
          if HOWMNY = 'S', the left eigenvectors of T specified by
                           SELECT, stored consecutively in the columns
                           of VL, in the same order as their
                           eigenvalues.
          Not referenced if SIDE = 'R'.


LDVL

          LDVL is INTEGER
          The leading dimension of the array VL.
          LDVL >= 1, and if SIDE = 'L' or 'B', LDVL >= N.


VR

          VR is COMPLEX array, dimension (LDVR,MM)
          On entry, if SIDE = 'R' or 'B' and HOWMNY = 'B', VR must
          contain an N-by-N matrix Q (usually the unitary matrix Q of
          Schur vectors returned by CHSEQR).
          On exit, if SIDE = 'R' or 'B', VR contains:
          if HOWMNY = 'A', the matrix X of right eigenvectors of T;
          if HOWMNY = 'B', the matrix Q*X;
          if HOWMNY = 'S', the right eigenvectors of T specified by
                           SELECT, stored consecutively in the columns
                           of VR, in the same order as their
                           eigenvalues.
          Not referenced if SIDE = 'L'.


LDVR

          LDVR is INTEGER
          The leading dimension of the array VR.
          LDVR >= 1, and if SIDE = 'R' or 'B', LDVR >= N.


MM

          MM is INTEGER
          The number of columns in the arrays VL and/or VR. MM >= M.


M

          M is INTEGER
          The number of columns in the arrays VL and/or VR actually
          used to store the eigenvectors.
          If HOWMNY = 'A' or 'B', M is set to N.
          Each selected eigenvector occupies one column.


WORK

          WORK is COMPLEX array, dimension (MAX(1,LWORK))


LWORK

          LWORK is INTEGER
          The dimension of array WORK. LWORK >= max(1,2*N).
          For optimum performance, LWORK >= N + 2*N*NB, where NB is
          the optimal blocksize.

          If LWORK = -1, then a workspace query is assumed; the routine
          only calculates the optimal size of the WORK array, returns
          this value as the first entry of the WORK array, and no error
          message related to LWORK is issued by XERBLA.


RWORK

          RWORK is REAL array, dimension (LRWORK)


LRWORK

          LRWORK is INTEGER
          The dimension of array RWORK. LRWORK >= max(1,N).

          If LRWORK = -1, then a workspace query is assumed; the routine
          only calculates the optimal size of the RWORK array, returns
          this value as the first entry of the RWORK array, and no error
          message related to LRWORK is issued by XERBLA.


INFO

          INFO is INTEGER
          = 0:  successful exit
          < 0:  if INFO = -i, the i-th argument had an illegal value


 

Author:

Univ. of Tennessee

Univ. of California Berkeley

Univ. of Colorado Denver

NAG Ltd.

Date:

November 2017

Further Details:

  The algorithm used in this program is basically backward (forward)
  substitution, with scaling to make the the code robust against
  possible overflow.

  Each eigenvector is normalized so that the element of largest
  magnitude has magnitude 1; here the magnitude of a complex number
  (x,y) is taken to be |x| + |y|.


 

Definition at line 248 of file ctrevc3.f.  

Author

Generated automatically by Doxygen for LAPACK from the source code.


 

Index

NAME
SYNOPSIS
Functions/Subroutines
Function/Subroutine Documentation
subroutine ctrevc3 (character SIDE, character HOWMNY, logical, dimension( * ) SELECT, integer N, complex, dimension( ldt, * ) T, integer LDT, complex, dimension( ldvl, * ) VL, integer LDVL, complex, dimension( ldvr, * ) VR, integer LDVR, integer MM, integer M, complex, dimension( * ) WORK, integer LWORK, real, dimension( * ) RWORK, integer LRWORK, integer INFO)
Author