subroutine dgges (JOBVSL, JOBVSR, SORT, SELCTG, N, A, LDA, B, LDB, SDIM, ALPHAR, ALPHAI, BETA, VSL, LDVSL, VSR, LDVSR, WORK, LWORK, BWORK, INFO)
DGGES computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices
DGGES computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices
Purpose:
DGGES computes for a pair of N-by-N real nonsymmetric matrices (A,B),
the generalized eigenvalues, the generalized real Schur form (S,T),
optionally, the left and/or right matrices of Schur vectors (VSL and
VSR). This gives the generalized Schur factorization
(A,B) = ( (VSL)*S*(VSR)**T, (VSL)*T*(VSR)**T )
Optionally, it also orders the eigenvalues so that a selected cluster
of eigenvalues appears in the leading diagonal blocks of the upper
quasi-triangular matrix S and the upper triangular matrix T.The
leading columns of VSL and VSR then form an orthonormal basis for the
corresponding left and right eigenspaces (deflating subspaces).
(If only the generalized eigenvalues are needed, use the driver
DGGEV instead, which is faster.)
A generalized eigenvalue for a pair of matrices (A,B) is a scalar w
or a ratio alpha/beta = w, such that A - w*B is singular. It is
usually represented as the pair (alpha,beta), as there is a
reasonable interpretation for beta=0 or both being zero.
A pair of matrices (S,T) is in generalized real Schur form if T is
upper triangular with non-negative diagonal and S is block upper
triangular with 1-by-1 and 2-by-2 blocks. 1-by-1 blocks correspond
to real generalized eigenvalues, while 2-by-2 blocks of S will be
"standardized" by making the corresponding elements of T have the
form:
[ a 0 ]
[ 0 b ]
and the pair of corresponding 2-by-2 blocks in S and T will have a
complex conjugate pair of generalized eigenvalues.
Parameters:
JOBVSL is CHARACTER*1
= 'N': do not compute the left Schur vectors;
= 'V': compute the left Schur vectors.
JOBVSR
JOBVSR is CHARACTER*1
= 'N': do not compute the right Schur vectors;
= 'V': compute the right Schur vectors.
SORT
SORT is CHARACTER*1
Specifies whether or not to order the eigenvalues on the
diagonal of the generalized Schur form.
= 'N': Eigenvalues are not ordered;
= 'S': Eigenvalues are ordered (see SELCTG);
SELCTG
SELCTG is a LOGICAL FUNCTION of three DOUBLE PRECISION arguments
SELCTG must be declared EXTERNAL in the calling subroutine.
If SORT = 'N', SELCTG is not referenced.
If SORT = 'S', SELCTG is used to select eigenvalues to sort
to the top left of the Schur form.
An eigenvalue (ALPHAR(j)+ALPHAI(j))/BETA(j) is selected if
SELCTG(ALPHAR(j),ALPHAI(j),BETA(j)) is true; i.e. if either
one of a complex conjugate pair of eigenvalues is selected,
then both complex eigenvalues are selected.
Note that in the ill-conditioned case, a selected complex
eigenvalue may no longer satisfy SELCTG(ALPHAR(j),ALPHAI(j),
BETA(j)) = .TRUE. after ordering. INFO is to be set to N+2
in this case.
N
N is INTEGER
The order of the matrices A, B, VSL, and VSR. N >= 0.
A
A is DOUBLE PRECISION array, dimension (LDA, N)
On entry, the first of the pair of matrices.
On exit, A has been overwritten by its generalized Schur
form S.
LDA
LDA is INTEGER
The leading dimension of A. LDA >= max(1,N).
B
B is DOUBLE PRECISION array, dimension (LDB, N)
On entry, the second of the pair of matrices.
On exit, B has been overwritten by its generalized Schur
form T.
LDB
LDB is INTEGER
The leading dimension of B. LDB >= max(1,N).
SDIM
SDIM is INTEGER
If SORT = 'N', SDIM = 0.
If SORT = 'S', SDIM = number of eigenvalues (after sorting)
for which SELCTG is true. (Complex conjugate pairs for which
SELCTG is true for either eigenvalue count as 2.)
ALPHAR
ALPHAR is DOUBLE PRECISION array, dimension (N)
ALPHAI
ALPHAI is DOUBLE PRECISION array, dimension (N)
BETA
BETA is DOUBLE PRECISION array, dimension (N)
On exit, (ALPHAR(j) + ALPHAI(j)*i)/BETA(j), j=1,...,N, will
be the generalized eigenvalues. ALPHAR(j) + ALPHAI(j)*i,
and BETA(j),j=1,...,N are the diagonals of the complex Schur
form (S,T) that would result if the 2-by-2 diagonal blocks of
the real Schur form of (A,B) were further reduced to
triangular form using 2-by-2 complex unitary transformations.
If ALPHAI(j) is zero, then the j-th eigenvalue is real; if
positive, then the j-th and (j+1)-st eigenvalues are a
complex conjugate pair, with ALPHAI(j+1) negative.
Note: the quotients ALPHAR(j)/BETA(j) and ALPHAI(j)/BETA(j)
may easily over- or underflow, and BETA(j) may even be zero.
Thus, the user should avoid naively computing the ratio.
However, ALPHAR and ALPHAI will be always less than and
usually comparable with norm(A) in magnitude, and BETA always
less than and usually comparable with norm(B).
VSL
VSL is DOUBLE PRECISION array, dimension (LDVSL,N)
If JOBVSL = 'V', VSL will contain the left Schur vectors.
Not referenced if JOBVSL = 'N'.
LDVSL
LDVSL is INTEGER
The leading dimension of the matrix VSL. LDVSL >=1, and
if JOBVSL = 'V', LDVSL >= N.
VSR
VSR is DOUBLE PRECISION array, dimension (LDVSR,N)
If JOBVSR = 'V', VSR will contain the right Schur vectors.
Not referenced if JOBVSR = 'N'.
LDVSR
LDVSR is INTEGER
The leading dimension of the matrix VSR. LDVSR >= 1, and
if JOBVSR = 'V', LDVSR >= N.
WORK
WORK is DOUBLE PRECISION array, dimension (MAX(1,LWORK))
On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
LWORK
LWORK is INTEGER
The dimension of the array WORK.
If N = 0, LWORK >= 1, else LWORK >= 8*N+16.
For good performance , LWORK must generally be larger.
If LWORK = -1, then a workspace query is assumed; the routine
only calculates the optimal size of the WORK array, returns
this value as the first entry of the WORK array, and no error
message related to LWORK is issued by XERBLA.
BWORK
BWORK is LOGICAL array, dimension (N)
Not referenced if SORT = 'N'.
INFO
INFO is INTEGER
= 0: successful exit
< 0: if INFO = -i, the i-th argument had an illegal value.
= 1,...,N:
The QZ iteration failed. (A,B) are not in Schur
form, but ALPHAR(j), ALPHAI(j), and BETA(j) should
be correct for j=INFO+1,...,N.
> N: =N+1: other than QZ iteration failed in DHGEQZ.
=N+2: after reordering, roundoff changed values of
some complex eigenvalues so that leading
eigenvalues in the Generalized Schur form no
longer satisfy SELCTG=.TRUE. This could also
be caused due to scaling.
=N+3: reordering failed in DTGSEN.
Author:
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
Definition at line 286 of file dgges.f.
Generated automatically by Doxygen for LAPACK from the source code.