use SDL ':init';
use SDL::Event;
use SDL::Events ':all';
SDL::init(SDL_INIT_VIDEO); # Event can only be grabbed in the same thread as this
...
my $event = SDL::Event->new(); # notices 'Event' ne 'Events'
while( 1 )
{
SDL::Events::pump_events();
while( SDL::Events::poll_event($event) )
{
#check by event type
on_active() if $event->type == SDL_ACTIVEEVENT;
...
}
}
use SDL::Events ();
and access them directly:
SDL::Events::SDL_ACTIVEEVENT;
or by choosing the export tags below:
Export tag: ':type'
SDL_ACTIVEEVENT SDL_KEYDOWN SDL_KEYUP SDL_MOUSEMOTION SDL_MOUSEBUTTONDOWN SDL_MOUSEBUTTONUP SDL_JOYAXISMOTION SDL_JOYBALLMOTION SDL_JOYHATMOTION SDL_JOYBUTTONDOWN SDL_JOYBUTTONUP SDL_QUIT SDL_SYSWMEVENT SDL_VIDEORESIZE SDL_VIDEOEXPOSE SDL_USEREVENT SDL_NUMEVENTS
Export tag: ':mask'
SDL_EVENTMASK SDL_ACTIVEEVENTMASK SDL_KEYDOWNMASK SDL_KEYUPMASK SDL_KEYEVENTMASK SDL_MOUSEMOTIONMASK SDL_MOUSEBUTTONDOWNMASK SDL_MOUSEBUTTONUPMASK SDL_MOUSEEVENTMASK SDL_JOYAXISMOTIONMASK SDL_JOYBALLMOTIONMASK SDL_JOYHATMOTIONMASK SDL_JOYBUTTONDOWNMASK SDL_JOYBUTTONUPMASK SDL_JOYEVENTMASK SDL_VIDEORESIZEMASK SDL_VIDEOEXPOSEMASK SDL_QUITMASK SDL_SYSWMEVENTMASK SDL_ALLEVENTS
Export tag: ':action'
SDL_ADDEVENT SDL_PEEKEVENT SDL_GETEVENT
Export tag: ':state'
SDL_QUERY SDL_IGNORE SDL_DISABLE / SDL_ENABLE SDL_RELEASED / SDL_PRESSED
Export tag: ':hat'
SDL_HAT_CENTERED SDL_HAT_UP / SDL_HAT_RIGHT / SDL_HAT_DOWN / SDL_HAT_LEFT SDL_HAT_RIGHTUP / SDL_HAT_RIGHTDOWN / SDL_HAT_LEFTUP / SDL_HAT_LEFTDOWN
Export tag: ':app'
SDL_APPMOUSEFOCUS SDL_APPINPUTFOCUS SDL_APPACTIVE
Export tag: ':button'
SDL_BUTTON SDL_BUTTON_LEFT / SDL_BUTTON_MIDDLE / SDL_BUTTON_RIGHT SDL_BUTTON_WHEELUP / SDL_BUTTON_WHEELDOWN SDL_BUTTON_X1 / SDL_BUTTON_X2 SDL_BUTTON_LMASK / SDL_BUTTON_MMASK / SDL_BUTTON_RMASK SDL_BUTTON_X1MASK / SDL_BUTTON_X2MASK
Export tag: ':keysym'
SDLK_UNKNOWN SDLK_FIRST SDLK_BACKSPACE SDLK_TAB SDLK_CLEAR SDLK_RETURN SDLK_PAUSE SDLK_ESCAPE SDLK_SPACE SDLK_EXCLAIM SDLK_QUOTEDBL SDLK_HASH SDLK_DOLLAR SDLK_AMPERSAND SDLK_QUOTE SDLK_LEFTPAREN / SDLK_RIGHTPAREN SDLK_ASTERISK SDLK_PLUS / SDLK_MINUS SDLK_COMMA SDLK_PERIOD SDLK_0 .. SDLK_9 SDLK_COLON SDLK_SEMICOLON SDLK_LESS / SDLK_GREATER SDLK_EQUALS SDLK_QUESTION SDLK_AT SDLK_LEFTBRACKET / SDLK_RIGHTBRACKET SDLK_SLASH / SDLK_BACKSLASH SDLK_CARET SDLK_UNDERSCORE SDLK_BACKQUOTE SDLK_a .. SDLK_z SDLK_DELETE SDLK_WORLD_0 .. SDLK_WORLD_95 SDLK_KP0 .. SDLK_KP9 SDLK_KP_PERIOD SDLK_KP_DIVIDE / SDLK_KP_MULTIPLY SDLK_KP_MINUS / SDLK_KP_PLUS SDLK_KP_ENTER SDLK_KP_EQUALS SDLK_UP / SDLK_DOWN / SDLK_RIGHT / SDLK_LEFT SDLK_INSERT SDLK_HOME / SDLK_END SDLK_PAGEUP / SDLK_PAGEDOWN SDLK_F1 .. SDLK_F15 SDLK_NUMLOCK / SDLK_CAPSLOCK / SDLK_SCROLLOCK SDLK_RSHIFT / SDLK_LSHIFT SDLK_RCTRL / SDLK_LCTRL SDLK_RALT / SDLK_LALT SDLK_RMETA / SDLK_LMETA SDLK_LSUPER / SDLK_RSUPER SDLK_MODE SDLK_COMPOSE SDLK_HELP SDLK_PRINT SDLK_SYSREQ SDLK_BREAK SDLK_MENU SDLK_POWER SDLK_EURO SDLK_UNDO
Export tag ':keymod'
KMOD_NONE KMOD_LSHIFT / KMOD_RSHIFT / KMOD_SHIFT KMOD_LCTRL / KMOD_RCTRL / KMOD_CTRL KMOD_LALT / KMOD_RALT / KMOD_ALT KMOD_LMETA / KMOD_RMETA / KMOD_META KMOD_NUM KMOD_CAPS KMOD_MODE KMOD_RESERVED
pump_events();
pump_events gathers all the pending input information from devices and places it on the event queue. Without calls to pump_events no events would ever be placed on the queue. Often the need for calls to pump_events is hidden from the user since ``poll_event'' and ``wait_event'' implicitly call pump_events. However, if you are not polling or waiting for events (e.g. you are filtering them), then you must call pump_events to force an event queue update.
my $num_peep_events = SDL::Events::peep_events($event, 127, SDL_PEEKEVENT, SDL_ALLEVENTS);
If action is SDL_ADDEVENT, up to num_events events will be added to the back of the event queue.
If action is SDL_PEEKEVENT, up to num_events events at the front of the event queue, matching mask, will be returned and will not be removed from the queue.
If action is SDL_GETEVENT, up to num_events events at the front of the event queue, matching mask, will be returned and will be removed from the queue.
The mask parameter is a bitwise OR of SDL::Events::SDL_EVENTMASK(event_type), for all event types you are interested in
This function is thread-safe.
You may have to call pump_events before calling this function. Otherwise, the events may not be ready to be filtered when you call peep_events.
Examples of mask:
RETURN
Number of Events actually stored or -1 if there was an error
If $event is not NULL, the next event is removed from the queue and stored in the SDL::Event structure pointed to by $event.
As this function implicitly calls pump_events, you can only call this function in the thread that set the video mode with SDL::Video::set_video_mode.
RETURN
Returns 1 if there are any pending events, or 0 if there are none available.
The event queue can actually be used as a two way communication channel. Not only can events be read from the queue, but the user can also push their own events onto it. event is a pointer to the event structure you wish to push onto the queue. The event is copied into the queue, and the caller may dispose of the memory pointed to after push_event returns.
Note: Pushing device input events onto the queue doesn't modify the state of the device within SDL.
This function is thread safe, and can be called from other threads safely.
RETURN
Returns 0 on success or -1 if the event couldn't be pushed.
If $event is not NULL, the next event is removed from the queue and stored in $event.
As this function implicitly calls SDL_PumpEvents, you can only call this function in the thread that SDL::Video::set_video_mode.
RETURN
0 if there was an error while waiting for events, 1 otherwise
my $filter = sub { if($_[0]->type == SDL_ACTIVEEVENT){ return 0} else{ return 1; }};
SDL::Events::set_event_filter($filter);
PARAMETER
set_event_filter takes a coderef that it checks all events again. The callback gets a event in the stack
sub { my $event_to_test = shift; ...}
to filter the event return a 0, to pass the filter return a 1.
One Caveat is if you are filtering SDL_QUIT the event will be filtered if it is non-interrupt call ( Window closes normally ). If it is a interrupt SDL_QUIT it will be process on the next event poll.
Events pushed onto to the queue with SDL::Events::push_events or SDL::Events::peep_events do not get filtered.
This callback may run in a different thread.
my $keys_ref = SDL::Events::get_key_state();
print $keys_ref->[SDLK_RETURN]; # 1 if pressed , 0 if not pressed
Use SDL::Events::pump_events to update the state array.
This function gives you the current state after all events have been processed, so if a key or button has been pressed and released before you process events, then the pressed state will never show up in the get_key_state call.
This function doesn't take into account whether shift has been pressed or not.
Returns the current state of modifier keys
Return value is an OR'd combination of KMOD_*
SDL::Events::pump_events; #get latest mod_state in buffers my $mod_state = SDL::Events::get_mod_state(); # Check which ones are pressed with # no mod pressed? print 'no_mod' if ( $mod_state & KMOD_NONE ); # CTRL or ALT print 'ctrl alt' if ($mod_state & KMOD_CTRL || $mod_state & KMOD_ALT );
MOD VALUES
The inverse of SDL::Events::get_mod_state allows you to impose modifier key states on your application.
Simply pass your desired modifier states into $modstate. This value can be a OR'd combination of any KMOD* constant.
my $modstate = KMOD_LMETA | KMOD_LSHIFT;
Any KMOD_* constant see SDL::Events::get_mod_state for constants.
SDL::Events::set_mod_state( $modstate );
SDL::Events::event_state( $type, $state );
A list of $type(s) can be found in SDL::Event
STATES
my $event = SDL::Event->new();
while( SDL::Events::poll_event($event) )
{
my $key = $event->key_sym;
$key_str = SDL::Events::get_key_name($key);
}
Returns a string with the name of the key sym.
my $previous_translation_mode = SDL::Events::enable_unicode( 1 ); #enable
$previous_translation_mode = SDL::Events::enable_unicode( 0 ); #disables
To obtain the character codes corresponding to received keyboard events, Unicode translation must first be turned on using this function. The translation incurs a slight overhead for each keyboard event and is therefore disabled by default. For each subsequently received key down event, the unicode member of the SDL::Event::key_sym provided structure will be then contain the corresponding character code, or otherwise zero.
A value of 1 for enabling, 0 for disabling and -1 for unchanged. -1 is useful for querying the current translation mode.
Only key press events will be translated not release events.
Returns the previous translation mode as (1,0).
my $success = SDL::Events::enable_key_repeat( $delay, $interval );
Enables or disables the keyboard repeat rate. $delay specifies how long the key must be pressed before it begins repeating, it then repeats at the speed specified by $interval. Both $delay and $interval are expressed in milliseconds.
Setting $delay to 0 disables key repeating completely. Good default values are SDL_DEFAULT_REPEAT_DELAY and SDL_DEFAULT_REPEAT_INTERVAL.
Return 0 on success and -1 on fail.
my ($mask,$x,$y) = @{ SDL::Events::get_mouse_state( ) };
print 'Button Left pressed' if ($mask & SDL_BUTTON_LMASK);
print 'Button Right pressed' if ($mask & SDL_BUTTON_RMASK);
print 'Button Middle pressed' if ($mask & SDL_BUTTON_MMASK);
print $x.','.$y;
The current button state is returned as a button $bitmask, which can be tested using the the above constants
my ($mask,$x,$y) = @{ SDL::Events::get_mouse_state( ) };
print 'Button Left pressed' if ($mask & SDL_BUTTON_LMASK);
print 'Button Right pressed' if ($mask & SDL_BUTTON_RMASK);
print 'Button Middle pressed' if ($mask & SDL_BUTTON_MMASK);
print $x.','.$y; # this is relative to the last position of the mouse
The current button state is returned as a button $bitmask, which can be tested using the the above constants
my $app_state = SDL::Events::get_app_state();
The $app_state is a bitwise combination of:
warn 'mouse focus' if $app_state & SDL_APPMOUSEFOCUS
warn 'keyboard focus' if $app_state & SDL_APPINPUTFOCUS
warn 'Application Visible' if $app_state & SDL_APPACTIVE
my $status = SDL::Events::joystick_event_state( $state );
This function is used to enable or disable joystick event processing. With joystick event processing disabled you will have to update joystick states with SDL::Joystick::update and read the joystick information manually. $state can be:
Warning: Calling this function may delete all events currently in SDL's event queue.
If $state is SDL_QUERY then the current state is returned, otherwise the new processing state is returned.