sane\-nec
Section: SANE Scanner Access Now Easy (5)
Updated: 14 Jul 2008
Page Index
NAME
sane-nec - SANE backend for NEC scanners
DESCRIPTION
The
sane-nec
library implements a SANE (Scanner Access Now Easy) backend that
provides access to NEC SCSI scanners. This backend should be
considered
alpha-quality
software! In the current state it is known to work with PC-IN500/4C
scanners. Another MultiReader scanner series is not supported. PC-IN
500/4C and MultiReader scanner are only sold in Japan (except Multi
Reader PetiScan).
For other scanners, it may or may not work.
The backend has the following known problems:
-
- - ColorLineart mode is not supported.
-
- - Device name is fixed to /dev/scanner
-
At present,
the following scanners are known to work with this backend.
-
Vendor Product id
------ -----------
NEC PC-IN500/4C
FILES
- /etc/sane.d/nec.conf
-
The backend configuration file.
- /usr/lib64/sane/libsane-nec.a
-
The static library implementing this backend.
- /usr/lib64/sane/libsane-nec.so
-
The shared library implementing this backend (present on systems that
support dynamic loading).
ENVIRONMENT
- SANE_DEBUG_NEC
-
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. E.g.,
a value of 128 requests all debug output to be printed. Smaller
levels reduce verbosity.
SEE ALSO
sane(7),
sane-scsi(5)
AUTHORS
Kazuya Fukuda