sane\-pieusb
Section: SANE Scanner Access Now Easy (5)
Updated: 10 Aug 2015
Page Index
NAME
sane-pieusb - SANE backend for USB-connected PIE PowerSlide and
Reflecta DigitDia/CrystalScan/ProScan slide scanners
DESCRIPTION
The
sane-pieusb
library implements a SANE (Scanner Access Now Easy) backend that
provides access to USB-connected PIE and Reflecta slide scanners.
At present, the following scanners should work with this backend:
Model: Status
------------------------- ------
PIE PowerSlide 3600 Untested
PIE PowerSlide 3650 Untested
PIE PowerSlide 4000 Untested
PIE PowerSlide 5000 Untested
Reflecta CrystalScan 7200 Untested
Reflecta ProScan 4000 Untested
Reflecta ProScan 7200 Untested
Reflecta DigitDia 3600 Untested
Reflecta DigitDia 4000 Untested
Reflecta DigitDia 5000 Untested
Reflecta DigitDia 6000 Ok
MULTIPLE SLIDES
Support for multiple slide scanners (like the PowerSlide or DigitDia
series) is done by auto-advancing ('Advance slide' setting) the slide
after each scan.
However, for best results, it is recommended to do a preview for
every slide since this sets gamma, brightness, and contrast to optimal
values.
Attention: SANE does not have an automatic landscape/portrait
detection and re-orientation when scanning multiple slides. You have
to put all slides into one orientation first !
DIRT REMOVAL
If available,
sane-pieusb
supports infrared scans for dirt detection and
removal. This must be enabled via the 'Clean image' setting.
KNOWN PROBLEMS
The
sane-pieusb
backend supports dirt removal based on infrared scan
information. Since SANE does not provide post-processing in the
backend,
sane-pieusb
does the scanning and dirt removal during the setup
phase. The 'scan' phase is only used to transfer the completed image.
Therefore
sane-pieusb
does not multi-thread making a typical frontend
appear as 'blocked'. Also cancel requests are only honored between
scans.
ENVIRONMENT
- SANE_DEBUG_PIEUSB
-
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. E.g.,
a value of 128 requests all debug output to be printed. Smaller
levels reduce verbosity.
-
level debug output
------- ------------------------------
0 nothing
1 errors
2 warnings & minor errors
5 additional information
7 SANE api calls
9 backend functions
11 scanner functions
13 usb functions
15 image buffer functions
FILES
- /etc/sane.d/pieusb.conf
-
The backend configuration file
- /usr/lib64/sane/libsane-pieusb.a
-
The static library implementing this backend.
- /usr/lib64/sane/libsane-pieusb.so
-
The shared library implementing this backend (present on systems that
support dynamic loading).
SEE ALSO
sane(7)
CONTACT AND BUG-REPORTS
Please send any information and bug-reports to:
Klaus Kämpf
<
kkaempf@suse.com>
AUTHORS
The pieusb backend is based on work by Jan Vleeshouwers, Michael
Rickmann, and Klaus Kämpf