pack
Section: Tk Built-In Commands (n)
Updated: 4.0
Page Index
NAME
pack - Geometry manager that packs around edges of cavity
SYNOPSIS
pack option arg ?
arg ...?
DESCRIPTION
The pack command is used to communicate with the packer,
a geometry manager that arranges the children of a parent by
packing them in order around the edges of the parent.
The pack command can have any of several forms, depending
on the option argument:
- pack slave ?slave ...? ?options?
-
If the first argument to pack is a window name (any value
starting with
``.''),
then the command is processed in the same way as pack configure.
- pack configure slave ?slave ...? ?options?
-
The arguments consist of the names of one or more slave windows
followed by pairs of arguments that specify how
to manage the slaves.
See THE PACKER ALGORITHM below for details on how the options
are used by the packer.
The following options are supported:
-
- -after other
-
Other must the name of another window.
Use its master as the master for the slaves, and insert
the slaves just after other in the packing order.
- -anchor anchor
-
Anchor must be a valid anchor position such as n
or sw; it specifies where to position each slave in its
parcel.
Defaults to center.
- -before other
-
Other must the name of another window.
Use its master as the master for the slaves, and insert
the slaves just before other in the packing order.
- -expand boolean
-
Specifies whether the slaves should be expanded to consume
extra space in their master.
Boolean may have any proper boolean value, such as 1
or no.
Defaults to 0.
- -fill style
-
If a slave's parcel is larger than its requested dimensions, this
option may be used to stretch the slave.
Style must have one of the following values:
-
- none
-
Give the slave its requested dimensions plus any internal padding
requested with -ipadx or -ipady. This is the default.
- x
-
Stretch the slave horizontally to fill the entire width of its
parcel (except leave external padding as specified by -padx).
- y
-
Stretch the slave vertically to fill the entire height of its
parcel (except leave external padding as specified by -pady).
- both
-
Stretch the slave both horizontally and vertically.
- -in other
-
Insert the slave(s) at the end of the packing order for the master
window given by other.
- -ipadx amount
-
Amount specifies how much horizontal internal padding to
leave on each side of the slave(s).
Amount must be a valid screen distance, such as 2 or .5c.
It defaults to 0.
- -ipady amount
-
Amount specifies how much vertical internal padding to
leave on each side of the slave(s).
Amount defaults to 0.
- -padx amount
-
Amount specifies how much horizontal external padding to
leave on each side of the slave(s). Amount may be a list
of two values to specify padding for left and right separately.
Amount defaults to 0.
- -pady amount
-
Amount specifies how much vertical external padding to
leave on each side of the slave(s). Amount may be a list
of two values to specify padding for top and bottom separately.
Amount defaults to 0.
- -side side
-
Specifies which side of the master the slave(s) will be packed against.
Must be left, right, top, or bottom.
Defaults to top.
If no -in, -after or -before option is specified
then each of the slaves will be inserted at the end of the packing list
for its parent unless it is already managed by the packer (in which
case it will be left where it is).
If one of these options is specified then all the slaves will be
inserted at the specified point.
If any of the slaves are already managed by the geometry manager
then any unspecified options for them retain their previous values rather
than receiving default values.
- pack forget slave ?slave ...?
-
Removes each of the slaves from the packing order for its
master and unmaps their windows.
The slaves will no longer be managed by the packer.
- pack info slave
-
Returns a list whose elements are the current configuration state of
the slave given by slave in the same option-value form that
might be specified to pack configure.
The first two elements of the list are
``-in master''
where master is the slave's master.
- pack propagate master ?boolean?
-
If boolean has a true boolean value such as 1 or on
then propagation is enabled for master, which must be a window
name (see GEOMETRY PROPAGATION below).
If boolean has a false boolean value then propagation is
disabled for master.
In either of these cases an empty string is returned.
If boolean is omitted then the command returns 0 or
1 to indicate whether propagation is currently enabled
for master.
Propagation is enabled by default.
- pack slaves master
-
Returns a list of all of the slaves in the packing order for master.
The order of the slaves in the list is the same as their order in
the packing order.
If master has no slaves then an empty string is returned.
THE PACKER ALGORITHM
For each master the packer maintains an ordered list of slaves
called the packing list.
The -in, -after, and -before configuration
options are used to specify the master for each slave and the slave's
position in the packing list.
If none of these options is given for a slave then the slave
is added to the end of the packing list for its parent.
The packer arranges the slaves for a master by scanning the
packing list in order.
At the time it processes each slave, a rectangular area within
the master is still unallocated.
This area is called the cavity; for the first slave it
is the entire area of the master.
For each slave the packer carries out the following steps:
- [1]
-
The packer allocates a rectangular parcel for the slave
along the side of the cavity given by the slave's -side option.
If the side is top or bottom then the width of the parcel is
the width of the cavity and its height is the requested height
of the slave plus the -ipady and -pady options.
For the left or right side the height of the parcel is
the height of the cavity and the width is the requested width
of the slave plus the -ipadx and -padx options.
The parcel may be enlarged further because of the -expand
option (see EXPANSION below)
- [2]
-
The packer chooses the dimensions of the slave.
The width will normally be the slave's requested width plus
twice its -ipadx option and the height will normally be
the slave's requested height plus twice its -ipady
option.
However, if the -fill option is x or both
then the width of the slave is expanded to fill the width of the parcel,
minus twice the -padx option.
If the -fill option is y or both
then the height of the slave is expanded to fill the width of the parcel,
minus twice the -pady option.
- [3]
-
The packer positions the slave over its parcel.
If the slave is smaller than the parcel then the -anchor
option determines where in the parcel the slave will be placed.
If -padx or -pady is non-zero, then the given
amount of external padding will always be left between the
slave and the edges of the parcel.
Once a given slave has been packed, the area of its parcel
is subtracted from the cavity, leaving a smaller rectangular
cavity for the next slave.
If a slave does not use all of its parcel, the unused space
in the parcel will not be used by subsequent slaves.
If the cavity should become too small to meet the needs of
a slave then the slave will be given whatever space is
left in the cavity.
If the cavity shrinks to zero size, then all remaining slaves
on the packing list will be unmapped from the screen until
the master window becomes large enough to hold them again.
EXPANSION
If a master window is so large that there will be extra space
left over after all of its slaves have been packed, then the
extra space is distributed uniformly among all of the slaves
for which the -expand option is set.
Extra horizontal space is distributed among the expandable
slaves whose -side is left or right,
and extra vertical space is distributed among the expandable
slaves whose -side is top or bottom.
GEOMETRY PROPAGATION
The packer normally computes how large a master must be to
just exactly meet the needs of its slaves, and it sets the
requested width and height of the master to these dimensions.
This causes geometry information to propagate up through a
window hierarchy to a top-level window so that the entire
sub-tree sizes itself to fit the needs of the leaf windows.
However, the pack propagate command may be used to
turn off propagation for one or more masters.
If propagation is disabled then the packer will not set
the requested width and height of the packer.
This may be useful if, for example, you wish for a master
window to have a fixed size that you specify.
RESTRICTIONS ON MASTER WINDOWS
The master for each slave must either be the slave's parent
(the default) or a descendant of the slave's parent.
This restriction is necessary to guarantee that the
slave can be placed over any part of its master that is
visible without danger of the slave being clipped by its parent.
PACKING ORDER
If the master for a slave is not its parent then you must make sure
that the slave is higher in the stacking order than the master.
Otherwise the master will obscure the slave and it will appear as
if the slave has not been packed correctly.
The easiest way to make sure the slave is higher than the master is
to create the master window first: the most recently created window
will be highest in the stacking order.
Or, you can use the raise and lower commands to change
the stacking order of either the master or the slave.
EXAMPLE
-
# Make the widgets
label .t -text "This widget is at the top" -bg red
label .b -text "This widget is at the bottom" -bg green
label .l -text "Left\nHand\nSide"
label .r -text "Right\nHand\nSide"
text .mid
.mid insert end "This layout is like Java's BorderLayout"
# Lay them out
pack .t -side top -fill x
pack .b -side bottom -fill x
pack .l -side left -fill y
pack .r -side right -fill y
pack .mid -expand 1 -fill both
SEE ALSO
grid(n),
place(n)
KEYWORDS
geometry manager, location, packer, parcel, propagation, size