eix

Section: (1)
Updated:
Page Index

НАЗВАНИЕ

eix - набор утилит для поиска, сравнения и обновления двоичного кэша местных деревьев portage

СИНТАКСИС

eix [общие ключи] [КЛЮЧИ] ВЫРАЖЕНИЕ

eix-update [общие ключи] [eix-update ключи]

eix-diff [общие ключи] [СТАРЫЙ КЭШ] [НОВЫЙ КЭШ]

eix-sync

eix-postsync

eix-test-obsolete

eix-remote

eix-layman

eix-installed-after

eix-installed

eix-etcat

eix-functions.sh

eix-header

eix-drop-permissions [--] [команда для выполнения]

masked-packages [ключи] категория/имя-версия[:слот][::репозиторий] ...

versionsort [-n|-p|-f|-v|-r|-V] [(rubbish)пакет-]версия ...

ОПИСАНИЕ

eix-update создаёт двоичный кэш местного дерева portage и оверлеев. eix ищет в этом кэше пакеты, совпадающие с критериями, заданными в ВЫРАЖЕНИи; конечно, если нет критериев, то выводятся все пакеты. eix-diff сравнивает два двоичных кэша и находит пакеты, которые были добавлены, удалены или для которых изменились новейшие стабильные версии.

Все эти программы и сценарии обращаются к файлам настройки, описанным позже. eix-sync может иметь собственный файл настройки.

eix-sync умеет синхронизировать portage/оверлей-деревья и сравнивать их со старым кэшем с помощью eix-diff. Для получения подробной справки по eix-sync вызовите eix-sync -h и смотрите документацию для /etc/eix-sync.conf ниже. Заметьте, что содержимое последнего также можно хранить в переменной EIX_SYNC_CONF.

eix-postsync is a simple alternative to eix-sync. It is similar to eix-update, but backups the cache before so that eix-diff can be used to show the differences to the previous syncing. To execute eix-postsync automatically after emerge --sync with >=portage-2.3.7, you can create the directory /etc/portage/postsync.d/ and symlink eix-postsync there. The main disadvantage of using emerge --sync with that symlink (compared to eix-sync) is that in the exceptional situation when a new upgrade of eix should no longer support the current database format then eix-diff will not work for the first syncing after the upgrade (unless you manually called eix-update before syncing).

eix-test-obsolete - сценарий, несколько раз вызывающий eix для более структурированного вывода eix -tTc.

eix-remote позволяет синхронизировать текущую базу eix с внешним сервером, добавляя/удаляя из неё данные. With this default you should regularly call eix-remote add1 and/or eix-remote add2 after eix-update so that the separate cachefile is synchronized with your main database. (If you use eix-sync this is done by default.) If you use the same cachefile: Заметьте, что чтобы сохранять эти удалённые данные между вызовами eix-update, нужно установить KEEP_VIRTUALS=true в /etc/eixrc. По умолчанью этот сценарий сбрасывает разрешенья используя eix-drop-permissions. Для полученья дополнительной информации по eix-remote вызовите eix-remote -h.

eix-installed-after is a simple script (with many comments) demonstrating some possibilities how a custom eix output format can be used. It outputs packages installed after (or before) the last (or first) emerge of a specific package/version. To get more help on this script call eix-installed-after -h.

eix-layman может добавлять или убирать местные оверлеи layman к/из текущей базы данных. You might want to use this if you want to avoid adding layman overlays to the regular portage repositories. Для полученья дополнительной информации по eix-layman вызовите eix-layman -h. eix-layman также является примером использованья eix-functions.sh:

eix-functions.sh outputs helper functions used by eix-sync, eix-remote, and eix-layman. You might want to use them for your own similar scripts. You can either "eval" the output of this program. Note that after this, you should usually call ReadFunctions for initialisation.

eix-header is a helper program for eix-remote (and possibly your own scripts). It can check database file headers and can find/output overlay paths or labels stored in these files. For details how to use it, call eix-header -h.

eix-drop-permissions is a helper program for eix-remote (and possibly your own scripts). It executes the command given as argument with permissions dropped according to EIX_USER, EIX_GROUP, EIX_UID, EIX_GID (see later). Note that also the binaries eix, eix-diff, and eix-update drop their permissions according to these variables as soon as possible, i.e., you might have to adjust these variables if you use eix (in particular eix-update) in a nonstandard setting.

eix-installed is a simple script which outputs all installed packages (in their exact version) and can check for packages installed with/without repository or buildtime information (cf. the description of CHECK_INSTALLED_OVERLAYS and USE_BUILD_TIME). To get more help on eix-installed call eix-installed -h.

eix-etcat is a wrapper script which calls eix with a configuration such that it resembles the behaviour of etcat -v from old app-portage/gentoolkit versions or its updated version from https://github.com/proteusx/etcat/ (e.g. app-portage/etcat from the mv overlay). The output is analogousand the default input accepts a sequence of (exact) package names (the specification of the category is optional). It might be instructive to look at the simple wrapper script if you want to write your own input/output format: The output format can be seen by calling eix --print FORMAT_ETCAT and eix --print FORMAT_VERSION_ETCAT.

masked-packages is a helper tool which matches the arguments against a list of masks. Details can be found near the end of the manpage.

versionsort is a helper tool for scripts which cuts the version strings from its arguments and outputs them sorted according to the portage rules of version sorting. Details can be found near the end of the manpage.

OPTIMIZATION, MEMORY, SECURITY

If you installed eix from the gentoo repository, then very likely the eix ebuild will not have installed eix with the CXXFLAGS and LDFLAGS which are recommended for optimization and security of eix by the eix maintainer. Also, eix can be configured to use less memory if required. See the section INSTALLATION for how to install eix in the way the maintainer recommends.

ПРИМЕРЫ

The following examples are some useful but perhaps unusual applications of eix. They are listed here to give you an idea what unexpected things you can do with eix. Since the examples are meant to be copied from this manpage they are listed early. To understand how they work, you should read the full manpage, of course. For more examples see e.g. the script eix-installed-after which contains many comments.

cmd | eix '-|*' --format '<markedversions:NAMESLOT>'

Assuming cmd creates a list of the form category/name-version or =category/name-version, the above prints the corresponding list category/name or category/name:SLOT (depending on whether SLOTs need to be distinguished).

cmd | eix '-|*' --format '<markedversions:NAMEASLOT>'

Similar to the above, but print always category/name:SLOT even if SLOT may be redundant. (Mnemonic: Always).

eix '-I*' --format '<installedversions:NAMEVERSION>'

Print out installed packages, using the format category/name-version. Of course, you could replace NAMEVERSION also by NAMESLOT or NAMEASLOT to get another format. The only purpose of the I option in this context is to speed up the output slightly.

eix '-I*' --format '<installedversions:EQNAMEVERSION>'

Similarly to the above but in the format =category/name-version which you can pipe directly to portage.

eix '-I*' --format '<installedversions:DATESORT>' | sort -n | cut -f2-3

Print out installed packages (with slots if necessary), sorted by installation date. If you want the output in another format, you have to modify DATESORT correspondingly (you can see the original definition in the output of eix --dump).

This sorting trick works as follows: The DATESORT variable outputs as the first column the seconds since epoch (eix --print DATESORT will show you that this happens by the variable DATESORT_DATE whose first entry is %s), and sort thus gets the correct order by sorting alphabetically. Finally the cut command gets rid of this first column which was only needed for sorting.

In the above examples, things like NAMEVERSION and DATESORT are actually just names of variables which are predefined in eix (with eix --dump you see them). You can as well define your own variables and use them. To understand how this works, please read the manpage, especially the description of the FORMAT string.

КЛЮЧИ

Common options

These options are common to eix, eix-diff, and eix-update.

-h, --help: Print a help screen and exit.
-Q, --quick (toggle) (not for eix-update): Do (not) read the slots of installed versions which cannot be guessed (i.e. installed versions of packages with at least two different slots for which the installed version is not in the database anymore). Note that with this option, eix and eix-diff might report false positives for up-/downgrade recommendations for these packages.
--care (not for eix-update): This deactivates --quick, and moreover, slots of installed version are always read instead of relying on the guess of the slot. This will in particular make sure that you get an up-/downgrade recommendation if a slot name of an installed version changes. Note that this will dramatically decrease the speed at the first call. (If your filesystem has a reasonable cache, later calls are almost not slower than without this option.)
--deps-installed (not for eix-update): This is the same as DEPS_INSTALLED=true. Dependencies of installed version are always read, even if they are known from an available version. Note that this will dramatically decrease the speed at the first call. (If your filesystem has a reasonable cache, later calls are almost not slower than without this option.)
-q, --quiet (toggle): Produce no output on stdout. For eix you can decrease execution time by combining this (depending on your needs) with either --brief or --brief2 and by setting COUNT_ONLY_PRINTED=false. See also NOFOUND_STATUS and MOREFOUND_STATUS
--dump: Show the current eixrc-variables, and their defaults as comments; then exit.
--dump-defaults: Show the defaults of the eixrc-variables, and their current values as comments; then exit.
--print VAR: Print the specified variable VAR of eixrc or of portage settings, completely expanded as it would be used internally by eix; then exit. The exit status is nonzero if VAR is not known to eix (see --known-vars) This is mainly intended for usage in scripts or for debugging purposes. If you use it in scripts you might want to specify PRINT_APPEND to get trailing spaces (see description of PRINT_APPEND). A special VAR which can be accessed only in this way is USE.profile which contains the profile's USE string.
--known-vars: Print an alphabetical list of variables known to eix with --print. After each variable name a newline is output.
-V, --version: Print version and exit.
-n, --nocolor: Disables the use of ANSI color codes. This is useful for terminals that do not support ANSI colors. (This is automatically turned on if stdout is no tty, but can be overridden by using --force-color)
-F, --force-color: The opposite of --nocolor.

Special information options

The following special information options are only provided by the eix binary. They are one-shot exclusive options, i.e. eix outputs only the required data and then exits.

--ansi (also for eix-diff): Define the 256 color palette suggested by Todd Larason (the author of the 256 color support for xterm). Use this if something some tool has redefined the default palette.
--256, --256d, --256d0, --256d1, --256l, --256l0, --256l1, 256b: Print the 256 color palettes (assuming it follows ansi color scheme) and exit. With --256d/--256l (--256d0/--256l0, --256d1/--256l1) only the foreground palettes with dark/light background (or only the normal or bright dark/light foreground palette, respectively) is printed. With --256b only the background palette is printed.
--print-all-eapis: print all EAPIs used in some version.
--print-all-useflags: print all IUSE or REQUIRED_USE words used in some version.
--print-all-keywords: print all KEYWORDS used in some version.
--print-all-slots: print all SLOT strings used in some version.
--print-all-licenses: print all LICENSE strings used in some package.
--print-all-depends: print all words occurring in some {,R,P,B}DEPEND. This only works if DEP=true is active (and was so when the cachefile was created).
--print-world-sets: print the world sets.
--print-profile-paths: Outputs all paths of the current profile. To each Path PRINT_APPEND is appended. If PRINT_APPEND is empty, the null character is appended.

Output options

--nowarn (toggle): Suppress some warnings concerning the portage configuration.
-x, --versionsort (toggle): Prints available versions sorted by versions (slots). If sorted by slots, each new slot starts in a new line. This mode can be combined with --versionlines (-l) to start a new line even for every version.
-l, --versionlines (toggle): Prints available versions in a (vertical) list. Only in this mode some additional information for each version is output. More precisely, depending on whether you have chosen --verbose and depending on the state of the configuration variables VERSION_{IUSE,KEYWORDS,DEPS}_{NORMAL,VERBOSE}, this can be the KEYWORDS, IUSE, DEPEND, RDEPEND, PDEPEND, BDEPEND data. Note that if IUSE is not printed per version then it is only collected for the whole package which can give the wrong impression, since often IUSE changes dramatically with versions.
-c, --compact: Causes eix to use a compact layout for search results. Useful for obtaining a better overview in the case of a long list of results, and also to help speed up searching over slow connections such as a serial console.
-v, --verbose: Use a verbose layout with additional information about search results such as the license of a package.
-N, --normal: Use the normal layout which is the default if DEFAULT_FORMAT was not explicitly changed.
--xml (toggle): Output in XML format. If you use this option from an external program you will probably want to combine this with --care and export some variables like LOCAL_PORTAGE_CONFIG to make sure that the preferred user output settings do not influence your output. If this option is active, OVERLAYS_LIST=none and --pure-packages are automatically active. The output format can be slightly influenced by the XML_* variables. The XML format used is documented in human-readable form in the files eix-xml.html or eix-xml.txt and in less human-readable form (namely as an xml-schema) in the file eix-xml.xsd
-*, --pure-packages (toggle): (do not forget quoting if you use the short form from within a shell.) Omit printing of additional information (overlay names, number of found packages) after the packages. This might be useful for some shell scripts parsing the output
-#, --only-names (toggle): As --pure-packages, but additionally print only the category and name of the packages found.
-0, --brief (toggle): Print at most one package then stop. This option is typically faster when used with COUNT_ONLY_PRINTED=false. In the latter case, when you use fuzzy search, not necessarily the best match is output.
--brief2 (toggle): As --brief, but print up to two packages.

Special options for eix

-t, --test-non-matching

Before other output, print entries of /etc/portage/package.* which do not match any existing version in the package database or which apparently have no meaning because they are empty (see TEST_FOR_EMPTY).

This option also lists all installed packages whose name is not in the database.

Note that this is essentially different from -T (see below). The latter only tests for packages in the database whether redundant entries in /etc/portage/package.* exist or whether the installed versions are available, respectively.

This option is best combined with -T to clean up /etc/portage/package.*

Or you can combine it with -e to have no other output.

If you have a reason to exclude certain entries/packages from this test, you can write those entries into a file /etc/portage/package.*.nonexistent where * is one of accept_keywords (or the obsolete keywords), mask, unmask, use, env, license, accept_restrict, cflags, and installed. These files (and how to modify their filenames) are described later.

-R, --remote

Uses the value of EIX_REMOTE1 as cache file name. Use this option if you want to see what eix-remote produced. You can make this option the default by setting REMOTE_DEFAULT=1.

-Z, --remote2

Uses the value of EIX_REMOTE2 as cache file name. Use this option if you want to see what eix-remote produced. You can make this option the default by setting REMOTE_DEFAULT=2.

--cache-file FILE

Use FILE instead of /var/cache/eix/portage.eix.

Options for EXPRESSION

EXPRESSION is used to narrow which packages eix prints.

An EXPRESSION can contain Boolean operators and tests according to the following grammar:

BRACE_OR_TEST ::= --open|-( EXPRESSION --close|-) |
TEST_WITH_OPTIONS

TEST_WITH_OPTIONS ::= [TEST_OPTIONS] [PATTERN]

Do not forget that !, (, ) have to be quoted in shells so that eix actually receives these as parts of arguments!

If you want that an EXPRESSION starts with -, precede it with two further -- symbols: This way, the EXPRESSION is not read as an option, and two additional -- symbols are ignored. For example, eix ---tool --or ---util will output the packages containing -tool or -util.

The meaning of the logical operators should be obvious with perhaps some exceptions:

1. If neither --and|-a nor --or|-o is between two EXPRESSIONs, then one of them is implicitly assumed; whether this is -a or -o depends on the setting of the configuration variable DEFAULT_IS_OR.

2. The operators -a and -o have equal precedence and are left-associative. In particular, X -o Y -a Z fails if Z fails.

3. --not|-! negates only the result of the subsequent BRACE_OR_TEST.

4. If PATTERN is omitted, it defaults to the empty PATTERN. For instance, with the default settings, eix without arguments will match all packages, since the empty string is contained in every name. On the other hand, eix -e should (usually) output nothing, because no package name should exactly be the empty string.

5. Note that the syntax implies that PATTERN always ends an expression. TEST_OPTIONS after PATTERN always start a new expression (i.e. an implicit --and or --or is inserted, depending on DEFAULT_IS_OR). In particular eix -e foo has a different meaning than eix foo -e. The latter means the same as eix foo --and -e or eix foo --or -e, depending on DEFAULT_IS_OR.

6. Observe that TEST_OPTIONS can consist of several options. All of these options are applied simultaneously, i.e. in a sense these options are logically braced and combined with and (independently of DEFAULT_IS_OR). This is somehow ambiguous, since PATTERN can be omitted. This ambiguity is resolved by interpreting successive TEST_OPTIONS always as a part of one TEST_WITH_OPTIONS. For instance, in eix -I -O -e foo all options are considered as part of a common EXPRESSION (not as four EXPRESSIONs as would be the case for eix -I '' -O '' -e '' foo). On the other hand, in eix -I --not -e the --not will cause the subsequent TEST_OPTION -e to be considered as part of a new EXPRESSION. Options other than TEST_OPTIONS or a logical option (like -!, -(, -), -a, -o) are ignored in this respect. For instance, eix -I -c -e generates only one EXPRESSION, since -c is neither a TEST_OPTION nor a logical option and therefore plays no role for the interpretation of EXPRESSION.

7. The TEST_OPTIONS can specify things like the match algorithm and also operation selection. All these specifications refer only to the current TEST_WITH_OPTIONS, in particular, they are only active for the next PATTERN.

Note that besides using this expression syntax a different way of implicit (though slow) package selection on various other criteria is possible by defining FORMATSTRING (see below) using conditionals such that it outputs an empty string for the undesired packages.

Here are the admissible TEST_OPTIONS:

-I, --installed

Only match installed packages. Please do not use this as a replacement for eix-installed -a (or qlist -ICv or equery), it is not the same: Packages that are installed, but no longer in the portage tree (or an overlay) are not listed here. However, you should better not have such packages at all (better put these packages in overlays in case you need to reinstall them). To find such packages, you can use eix -te (or eix -tI to get listed both) but be aware that eix -t does not obey the usual FORMAT rules for these packages. So you better do not use this in scripts unless you know what you are doing.

If you really want to use this option as a substitute for equery in scripts, you might want to combine it with some of

--format --only-names

--format '<installedversions:NAMEVERSION>' --pure-packages

--format '<installedversions:EQNAMEVERSION>' --pure-packages

--format '<installedversions:NAMESLOT>' --pure-packages

--format '<installedversions:NAMEASLOT>' --pure-packages

--format '<installedversions:DATESORT>' --pure-packages

-i, --multi-installed

Only match packages which are installed in at least two different versions. Usually, this means that these versions are slotted (at installation time).

-d, --dup-packages

Only match duplicated packages, for example, if sys-foo/bar exists both in the official portage tree and a local overlay. If DUP_PACKAGES_ONLY_OVERLAYS is set (see below), the instances must be in two different local overlays.

-D, --dup-versions

Only match packages with duplicated versions, for example, if sys-foo/bar-0.2.1 exists both in the official portage tree and a local overlay. If DUP_VERSIONS_ONLY_OVERLAYS is set (see below), both instances must be in overlays.

-1, --slotted

Only match packages with a nontrivial slot, i.e. where SLOT is nonempty and different from "0".

-2, --slots

Only match packages with at least two different slots. In contrast to -1, a package is not shown here, if only one slot is available with e.g. slot-name "4.3".

-u, --upgrade, --upgrade+, --upgrade-

Only match packages which have at least one slotted version installed which is not the best version within that slot. This means usually that you should either upgrade or downgrade that package.

However, the test takes also UPGRADE_TO_HIGHEST_SLOT (see below) into account.

If you use --upgrade+ or --upgrade-, then the test acts as if LOCAL_PORTAGE_CONFIG is true or false. Otherwise, this decision is based upon UPGRADE_LOCAL_MODE.

If you want to see only packages with downgrade recommendations, you might make use of the FORMATSTRING features described below.

--stable, --testing, --non-masked, --system, --profile

Only match packages which have at least one version which is stable (and non-masked), testing or stable (and non-masked), non-masked, or in system or profile, respectively. If several of these options are combined in one test, it is the same version which must satisfy all.

--stable+, --testing+, --non-masked+, --system+, --profile+

This is as the above ones just that the test acts as if LOCAL_PORTAGE_CONFIG=true.

--stable-, --testing-, --non-masked-, --system-, --profile-

This is as the above ones just that the test acts as if LOCAL_PORTAGE_CONFIG=false.

--installed-unstable, --installed-testing, --installed-masked

Only match packages which have at least one non-stable, testing, or masked version installed (the test acts as if LOCAL_PORTAGE_CONFIG=false). If several of these options are combined in one test, it is the same version which must satisfy all.

--world

Only match @world packages. This is analogous to "emerge @world", i.e. it includes not only packages in the world file but also in world sets and the @system set. If you do not want to have all included, choose the appropriate alternative option.

--world-file

This only matches packages from the world file or from the @system set.

--world-set

This only matches packages from world_set or from the @system set.

--selected

Only match @selected packages. This is analogous to "emerge @selected", i.e. it includes not only packages in the world file but also in world_sets (if you have @system contained in the world_sets file, then the behaviour is of course identical to --world). If you do not want to have both included, choose the appropriate alternative option.

--selected-file

This only matches packages from the world file.

--selected-set

This only matches packages from world_set.

--binary

Only match packages with a binary file (*.tbz2 or *.xpak) in PKGDIR. The version of the binary file must either match the version of an available version or of an installed version. (However, note that if no version is available, the package cannot be found either). Just the existence of the corresponding *.tbz2 or *.xpak file is checked: Whether portage can actually use the file depends also on metadata within that file (like USE settings) which is not considered by eix.

--nonvirtual

Only match packages with at least one version from the main tree or a non-virtual overlay.

--virtual

Only match packages with at least one version in a virtual overlay.

-O, --overlay

Only match packages with at least one version in an overlay.

--in-overlay overlay

Only match packages with at least one version in an overlay matching overlay.

If this option is repeated, the additional overlay arguments are joined to the list of admissible overlays.

overlay may be either a wildcard pattern or a number. Note that if you use the default OVERLAYS_LIST=all-used-renumbered you do not see the correct overlay numbers; to get a list of the correct overlay numbers you can e.g. call

OVERLAYS_LIST=all eix --not

or in scripts better

OVERLAYS_LIST=all PRINT_COUNT_ALWAYS=never eix -!

The special values 0 or $PORTDIR match the "main" tree (which in this connection is considered as the 0'th overlay).

If overlay is empty (or omitted if --in-overlay is the last option) it matches all overlays except for the "main" tree (i.e. --in-overlay '' is the same as -O).

--only-in-overlay overlay

Only match packages which have only versions in an overlay matching overlay.

If this option is repeated, the additional overlay arguments are joined to the list of admissible overlays.

overlay may be either a wildcard pattern or a number, as in --in-overlay. In particular, --only-in-overlay '' matches all packages which are not in the official portage tree but only in some overlay.

-J, --installed-overlay

Only match packages which have been installed from some overlay. To get a completely reliable result you should set CHECK_INSTALLED_OVERLAYS to true (which is not the default because it dramatically slows down the test). See CHECK_INSTALLED_OVERLAYS for details.

--installed-from-overlay overlay

This is analogous to --in-overlay with the difference that only packages are matched which have at least one version installed from overlay. For instance, --installed-from-overlay 0 will only match those packages which have at least one version which was installed from the regular portage tree. As for -J, you should set CHECK_INSTALLED_OVERLAYS to true to get a completely reliable result.

--installed-in-some-overlay

Only match packages with at least one installed version number which is also in some overlay.

--installed-in-overlay overlay

This is analogous to --in-overlay with the difference that only packages are matched which have at least one installed version in overlay. For instance, --installed-in-overlay 0 will only match those packages which have at least one version which is also in the regular portage tree.

--restrict-fetch

Only match packages which have at least one version with RESTRICT=fetch. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--restrict-mirror

Only match packages which have at least one version with RESTRICT=mirror. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--restrict-primaryuri

Only match packages which have at least one version with RESTRICT=primaryuri. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--restrict-binchecks

Only match packages which have at least one version with RESTRICT=binchecks. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--restrict-strip

Only match packages which have at least one version with RESTRICT=strip. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--restrict-test

Only match packages which have at least one version with RESTRICT=test. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--restrict-userpriv

Only match packages which have at least one version with RESTRICT=userpriv. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--restrict-installsources

Only match packages which have at least one version with RESTRICT=installsources. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--restrict-bindist

Only match packages which have at least one version with RESTRICT=bindist. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--restrict-parallel

Only match packages which have at least one version with RESTRICT=parallel. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--properties-interactive

Only match packages which have at least one version with PROPERTIES=interactive. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--properties-live

Only match packages which have at least one version with PROPERTIES=live. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--properties-virtual

Only match packages which have at least one version with PROPERTIES=virtual. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

--properties-set

Only match packages which have at least one version with PROPERTIES=set. If used with other PROPERTIES/RESTRICT tests, the version must satisfy all simultaneously.

-T, --test-obsolete

Only match obsolete packages.

Packages are obsolete if they have redundant entries in /etc/portage/package.* (if TEST_FOR_REDUNDANCY is true) or if not all installed versions exist (if TEST_FOR_NONEXISTENT is true).

What is considered as redundant is defined by the REDUNDANT_IF-variables below, and what is considered as non-existent is defined by the NONEXISTENT_IF-variables. Note that the test for versions from obsolete overlays works only reliable if you set CHECK_INSTALLED_OVERLAYS to true (which is not the default because it dramatically slows down the test). See CHECK_INSTALLED_OVERLAYS for details.

Note that this options only tests packages in the database - in particular, you will not find entries for e.g. renamed or removed (from the portage tree) packages with this option. Use -t to find the latter.

Therefore, this option is best combined with -t to find also other types of obsolete entries.

If you have a reason to exclude certain packages from this test, you can write those entries into a file (or directory) /etc/portage/package.nowarn This file (and how to specify alternative/additional files) is described later.

-|, --pipe

(Recall that a shell will not pass an unquoted | sign, so quote properly).

Only match packages/masks from standard input; usually you will want to use this in a pipe, redirected e.g. from emerge -pv (similar to genlop -p). Actually, any (space or newline separated) words are considered which contain a / symbol.

Each such word is considered as a mask (in the form of the first entry in /etc/portage/package.* files), and due to a heuristics package versions can also specified without an explicit leading = symbol. (This can lead to ambiguities; use --pipe-mask if you need a reliable result.)

All available packages/versions which match a mask from the input will in the output be considered as marked. For details on the latter, see the marked and markedversions:* formatstrings.

Even if --pipe occurs more than once, the standard input is of course only read once, but interpreted repeatedly for each occurrence (i.e. if the first --pipe matches, all others will also match).

If you want to use the standard input only for marking but not for selection, you can choose an expression like

eix something -a "-(" --pipe -o "-)"

If the option --pipe-name or --pipe-version occurs after this option in the argument list, --pipe acts as if it were --pipe-name or --pipe-version, respectively.

--pipe-mask

This is analogous to --pipe with the difference that only masks are allowed in the input, i.e. if package versions are specified the leading = is non-optional. This avoids ambiguities in the input if a part of the name looks like a version number. You should use this option instead of --pipe if you want a reliable result!

Match field selection

The subsequent options define the fields that the pattern should be tested on. Multiple fields may be specified in one expression (the expression matches if the pattern matches at least one of the specified fields). If you do not specify some of these options, the default is chosen according to some heuristic depending on the form of your pattern. In most cases, the default match field will be --name, but if your pattern looks "special" like e.g. "cat/n" or "@set", the default match field will change to --category-name, --set, --description, --homepage, or --license. Details of the heuristic are specified by the DEFAULT_MATCH_FIELD configuration variable explained later. Depending on the configuration of that variable, it might even be non-optional to specify some of the following options for every query.

-y, --any

Any match field is searched. This is the same as specifying simultaneously all of --name, --description, --category, ... Thus, you may want to use this if you want to be sure to not miss any matches. However, be warned that the output list will often be much longer than you might expect. (If you are curious, you can find with options -vl and piping to grep the often unexpected reason why a match occurs with -y.) To exclude at least the dependency strings from matches, you might want to combine this option with setting DEP=false, e.g.

DEP=false eix --any SIP

-s, --name

e.g. "eix"

-S, --description

e.g. "Small utility for searching .."

-C, --category

e.g. "app-portage"

-A, --category-name

e.g. "app-portage/eix"

-H, --homepage

e.g. "https://github.com/vaeth/eix/"

-L, --license

e.g. "GPL-2"

--available-deps, --available-depend, --available-rdepend, --available-pdepend, --available-bdepend

This test can only be successful if DEP=true is used (and if DEP=true was used when the cachefile was created). It matches against DEPEND, RDEPEND, PDEPEND, or BDEPEND (or with --available-deps any of those) of any available version of the package. --available-deps is the same as specifying all of --available-depend --available-rdepend --available-pdepend --available-bdepend. Note that it is matched against the string without any interpretation or modification of the latter; only word separators become single spaces. In particular, the string to match against can look like

app-admin/fam nls? ( sys-devel/gettext ) =dev-libs/apr-1* !!dev-db/libpq

Therefore, the match is not only against dependent packages but also against blockers and/or conditionals and various ways of specifying versions.

--installed-deps, --installed-depend, --installed-rdepend, --installed-pdepend, --installed-bdepend

This is similar to the corresponding option --available-* but with the difference that the corresponding dependency string of any installed versions of the package is matched. In contrast to --available-* this check does not involve the setting of DEP. You might probably want to combine these options with --deps-installed to make sure that indeed the content of the installed version is read.

Note that dependencies of installed versions are usually much simpler, e.g. not containing conditionals.

--deps, --depend, --rdepend, --pdepend, --bdepend

These are shortcuts for specifying the corresponding --avilable-* and --installed-* options simultaneously.

--set

Name of a local package set of a version in the database (i.e. corresponding to a file in /etc/portage/sets, /etc/portage/sets.eix, or from another directory specified in EIX_LOCAL_SETS_ADD; see the comments to EIX_LOCAL_SETS). The "profile", "system" and "world" sets are intentionally excluded here, since these should be tested with --profile[+-], --system[+-], --world, --world-all, or --world-sets.

--src-uri

SRC_URI of a version in the database

--eapi

EAPI of a version in the database, e.g. "6"

--installed-eapi

EAPI of an installed version

--slot

Slotname of a version in the database, e.g. "kde-4"

--fullslot

Slotname of a version in the database, possibly with its subslot, e.g. "3/1.4"

--installed-slot

Slotname of an installed version. Recall that without option --care (or CAREMODE=true) the slotname might be guessed.

--installed-fullslot

Slotname of an installed version, possibly with its subslot. Recall that without option --care (or CAREMODE=true) the slotname might be guessed.

-U, --use

A useflag defined by IUSE in some version by some of the ebuilds of the package. You will usually want to combine this option with -e

--installed-with-use

A useflag enabled during installation of the package. Of course, this flag can only match if the package is installed. Note that the same restrictions hold as for -I, i.e. only packages will be matched which are still in the database.

--installed-without-use

A useflag disabled during installation of the package. Of course, this flag can only match if the package is installed. Note that the same restrictions hold as for -I, i.e. only packages will be matched which are still in the database.

Match algorithm

The subsequent options define the algorithm by which the match field should be tested against the expression. Only one algorithm can be chosen for an expression. If you do not specify some of these options, the default is chosen according to some heuristic depending on the form of your search pattern and according to the selected match field. In most cases, the default will be --regex unless your expression "looks" like a glob pattern or a substring (in which case the corresponding algorithm will be the default), or if the selected match field refers only to USE-flags, sets, EAPI, or SLOT which perhaps most people would expect to match the whole string. Details of the heuristic are specified by the DEFAULT_MATCH_ALGORITHM configuration variable explained later. Depending on the configuration of that variable, it might even be non-optional to specify some of the following options for every query.

-e, --exact: Pattern is an exact (full) string. For example, "eix -e gcc" will only show packages with the name "gcc".
-b, --begin: Pattern is the beginning of the string. For example, "eix -b gcc" will show the package with the name "gcc" but also e.g. "gcc-config".
--end: Pattern is the end of the string.
-z, --substring: Pattern occurs somewhere within the string.
-f [N], --fuzzy [N]: Do a fuzzy search with a maximal levenshtein-distance of N (default ) for the full string. Note that this command slows down search speed.
-p, --pattern: pattern is a wildcard-pattern (for the full string). See fnmatch(3) and/or glob(7) for further information. Be sure to use single quotes around patterns (to prevent the shell from intercepting any wildcards).
-r, --regex: pattern is a regexp. Only a substring must be matched (unless ^ or $ are used); the empty pattern matches everything. For further information, please read regex(7). Again, be sure to use single quotes around patterns.

Defining layouts (see FORMATSTRING below)

--format FORMATSTRING: Defines the FORMATSTRING. Since eix-0.29.6, all other possibilities to modify the format string like the setting of DEFAULT_FORMAT or FORMAT are overridden by this option. In contrast, if this option is not used, whether the FORMAT, FORMAT_VERBOSE or FORMAT_COMPACT variable is used depends on the setting of DEFAULT_FORMAT and/or whether the options --verbose, --compact, or --normal are used.

Special options for eix-update

-H, --nostatus: Do not update the status line.
--force-status: Update the status line even if output is not a terminal or if TERM does not begin with a TERM_STATUSLINE word.
-o outputfile, --output outputfile: With this option, eix-update will write the eix database to outputfile instead of /var/cache/eix/portage.eix. When this option is used, the current umask will be honoured: otherwise, the umask is forced to 002 for creating the file.
-a overlay, --add-overlay overlay: This is similar to adding overlay to PORTDIR_OVERLAY in /etc/portage/make.conf or to ADD_OVERLAY but has the advantage that you need not modify some of those, and you can also use spaces in overlay. Overlays added by this option come after overlays added by KEEP_VIRTUALS. If overlay is already contained in the list of overlays, this option has no effect. It is explicitly admissible to use this option repeatedly to add several overlays.
-x overlay, --exclude-overlay overlay: This is similar to adding overlay to EXCLUDE_OVERLAY but has the advantage that you need not modify the latter, and you can also use spaces in overlay. overlay is considered as a mask. All matching overlays (even those added by later --add-overlay options) are excluded from the list of overlays. The PORTDIR directory is considered as any other overlay which can be excluded (in this case, the first overlay in the list will be stored as PORTDIR). It is explicitly admissible to use this option repeatedly to exclude several overlays.
-m overlay method, --override-method overlay method: Change the cache method of overlay (the PORTDIR directory is an allowed overlay) to method. overlay is considered as a mask, i.e. it may contain wildcards. If overlay does not match anything in the list of overlays, this option has no effect. This option is similar to adding the entry "overlay method" at the end of the OVERRIDE_CACHE_METHOD variable. It is explicitly admissible to use this option repeatedly to override cache methods for several overlays. The last matching override takes precedence. In particular, the option overrides the content of OVERRIDE_CACHE_METHOD.
-r overlay-path overlay-label, --repo-name overlay-path overlay-label: The overlay overlay-path obtains the label overlay-label, independent of any other settings. This may be overridden by REPO_NAMES. In contrast to REPO_NAMES, overlay-path is not a pattern but the exact path.
-v --verbose: Output the effectively used cache method for each ebuild. This produces a lot of output and is mainly useful for debugging if you are wondering why eix-update is faster/slower than expected.

OUTPUT

Slots

In contrast to usual output of versions in emerge, eix can also print slot names if they are nonempty and different from "0". Whether this happens is determined by the content of the FORMATSTRING.

If slots are printed, the slot name is separated from the version number either with a colon, or the slot names are written in braces. You can choose the preferred modes with the COLON_SLOTS variable.

If PROPERTIES or RESTRICT are set in the ebuild, this is shown by default in the version string; details can be influenced by setting of configuration variables.

Some Examples:

4.1.1:4.1 or 4.1.1(4.1): This is version 4.1.1 which will be installed into the slot "4.1".
3.14p:GNAT-3.14p or 3.14p(GNAT-3.14p): This is version 3.14p which will be installed into the slot "GNAT-3.14p".
2.0.0_rc1-r6: This is version 2.0.0_rc1-r6, and SLOT is either empty or "0".
1.0*ilvs^fmpbstuidP{tbz2,pak:2}: This is version 1.0 which is subject to PROPERTIES="interactive live virtual set" as well as RESTRICT="fetch mirror primaryuri binchecks strip test userpriv installsources bindist parallel" Moreover, a *.tbz2 and two *.xpak files (binary packages without or with FEATURES=binpkg-multi-instance, respectively) exist for that version in PKGDIR.
5.0-r3(5.0R3)^f or 5.0-r3:5.0R3^f: This is version 5.0-r3 which will be installed into SLOT 5.0R3 and has fetch restrictions.

Masking

If you used gentoo for more than a week you're probably going to immediately recognize the format of the masking in the version-strings. Nevertheless, we are going to explain it here by some examples. We describe here of course only the default setting; details can be influenced by setting of configuration variables.

[P]2.95.3-r8: If a mask for the package was found in the packages-files from your profile, but this version does not match it, the version is determined to be "masked by profile".
[M]4.0.0_alpha20050213: The version matches a mask from /etc/portage/package.mask, $PORTDIR/profiles/package.mask or a package.mask from your profile. Portage calls this "masked by package.mask".
[m]4.1.4: The version matches a local mask (from /etc/portage/package.mask), but it is neither "masked by profile" nor masked in $PORTDIR/profiles/package.mask.
{P}2.95.3-r8: The version was originally "masked by profile", but this was locally changed in /etc/portage/profile/packages.
{M}4.0.0_alpha20050213: The version was originally masked in $PORTDIR/profiles/package.mask, but this was locally changed in /etc/portage/package.unmask.
*3.3.3: This means the version is "masked by missing keyword" but stable for an alien architecture.
~*3.3.3: This version is "masked by missing keyword", stable on no architecture, but unstable on an alien architecture.
**3.3.3: This means the version is "masked by missing keyword" for all architectures.
(**)3.4.3-r2: That version originally had no keyword, but this was locally changed (in /etc/portage/package.{accept_,}keywords or by ACCEPT_KEYWORDS).
-0.8.14: Masked by -ARCH.
~3.3.5.20050130: The version would be "masked by ~keyword".
(~)3.3.5.20050130: The version was originally "masked by ~keyword", but this was locally changed (in /etc/portage/package.{accept_,}keywords or by ACCEPT_KEYWORDS).
[M]~1.0.9626: The version is both, "masked by package.mask" and "masked by ~keyword".
[m](~)4.1.4-r1: The version was originally only "masked by ~keyword", but this was locally changed (in /etc/portage/package.{accept_,}keywords or by ACCEPT_KEYWORDS). However, the version is locally masked (in /etc/portage/package.mask).
3.3.1: Finally, this would be a stable version (which would be stable also without the local settings).

eix-diff

The output of eix-diff is completely determined by configuration variables (DIFF_FORMAT_NEW, DIFF_FORMAT_DELETE, DIFF_FORMAT_CHANGED and a lot of variables which - at least in their default setting - is used by them via delayed substitution, see below). The following explanation by means of examples therefore can only describe the behavior in the default setting of the current eix version. Although this default format was not changed for quite a while, no stability of the defaults is guaranteed for future eix versions.

[N] >> foo/bar (~1.0): description of foo/bar

The package foo/bar has freshly appeared in the tree.

[*N] >> foo/bar (1.0): description of foo/bar

The package foo/bar has freshly appeared in the tree. Moreover, it has a version (1.0) which could be installed without any sort of unmasking/keywording.

<< foo/bar ({M}1.0): description of foo/bar

foo/bar was removed from the tree; the previous version 1.0 was masked, but it is currently not masked anymore (probably, because the developer has cleaned up the package.mask file with the removal of the package).

[*>] == foo/bar (1.0): description of foo/bar

The status of package foo/bar has changed in the tree (for your settings): It has gained a version (1.0) which could be installed without any sort of unmasking/keywords while in the previous tree foo/bar had no such version. Moreover, the > means that one slot has gained a higher version. In this case, it is actually the same change which is responsible for both symbols > and *.

[><] == foo/bar (1.1(1) 2.0(2) -> 1.0(1) 2.1(2)): description

The status of package foo/bar has changed in the tree (for your settings): The symbols on the left mean that one slot has gained a higher version which could be installed without modifying masks/keywords, another slot had such a highest version removed. If you consider the version strings, it becomes clear that slot 2 has obtained a new version (the previous stable in this slot was 2.0, the new one is 2.1), and that the previously highest stable version 1.1 of slot 1 was removed or masked (the current stable version in this slot is now 1.0).

[U?] == foo/bar (1.1(1)@01.01.2009; 1.1(1) -> 2.0(2)): description

The status of package foo/bar has changed in the tree (for your settings): The symbols on the left mean that a slot you have installed can be upgraded (without modifying masks/keywords), and that another slot you have installed was removed/masked. Looking at the versions on the right, it becomes clear that the installed version 1.1 of Slot 1 has been removed or masked, and that there is no other installed version of slot 1. However, a new stable version 2.0 in slot 2 has appeared (i.e. slot 2 did previously not exist or had no stable version).

Since no version of slot 2 was installed yet, eix cannot decide in this situation whether the symbol "U" is really appropriate: Since eix does no dependency tracking, it does not know whether the new slot would be pulled in e.g. by your world file, or whether there is only some dependency to your old slot. Therefore, the symbol "U" is only shown in this situation if UPGRADE_TO_HIGHEST_SLOT=true or if the package is listed in /etc/portage/package.slot_upgrade_allow.

Actually, the output [U?><] == foo/bar ... would be more consistent, because in addition one slot has gained a higher stable version and the highest stable version of another slot was removed, but since typically this is implicitly implied by "U" or "?", respectively, it was a design decision of the default setting that if U or ? is output then the symbols < and > will not be output. You can of course build a different DIFF_FORMAT_HEADER_CHANGED string which follows another policy.

FORMATSTRING

A formatstring can contain conditional blocks, package properties, colors and normal strings. The normal strings are output as expected (with special escape sequences being recognized, see below); for size calculations for e.g. tabs, UTF8 encoding is supposed.

Conditional blocks

Conditions are very simple: A property is expanded and the resulting string is tested against another string. If they are the same, the condition is true and the block is executed. Conditions can be negated so that the else-part is executed if the condition is true, and the if-part if the condition is false. The else-part can be also be completely left out.

{[!]PROPERTY[=RHS]}TCODE{}

Execute TCODE if the string resulting from expanding PROPERTY is equal to RHS. The ! would negate the behaviour.

{[!]PROPERTY[=RHS]}TCODE{else}FCODE{}

Execute TCODE if the string resulting from expanding PROPERTY is equal to STRING. If it's not, execute FCODE.

RHS is either a property (if enclosed in <>) or a variable (if prefixed with $) or a string (otherwise or if quoted).

PROPERTY can be either one of the Package properties specified below, or it can be a variable access. A variable access has the form $VARIABLE. VARIABLE need not be initialized; its content defaults to the empty string.

To change VARIABLE during runtime use this syntax:

{[!]*VARIABLE[=RHS]}

This sets the runtime variable VARIABLE to RHS. With !, the result is either 1 or empty, depending on whether RHS is nonmpty. If the trailing part (including the = sign) is omitted, there is a special meaning: {*VARIABLE} sets VARIABLE to 1, {!*VARIABLE} sets VARIABLE to the empty string.

Package properties

Names that refer to specific properties of the package that is currently printed. If used to print a property, the name must be enclosed in square brackets (i.e. "<name>").

name, category, homepage, licenses

The name, category, homepage and licenses for the current package.

availableversions:VARIABLE, availableversions:VARIABLE:VARSLOTS

For each version, print the content of the configuration/environment variable with name VARIABLE, interpreting it as a format string. If the second form is used and at least one slot of the package is nontrivial, then VARSLOTS is used instead of VARIABLE, and the versions are sorted according to slots.

To avoid a misunderstanding: It is not possible to enter the required format directly after the colon. Instead, the required format must be stored in a new variable, and VARIABLE and VARSLOTS are only the names of these variables.

Useful examples for VARIABLE are NAMEVERSION, EQNAMEVERSION, EQNAMEVERSION, ANAMESLOT, ANAMEASLOT, NAMESLOT, NAMEASLOT or DATESORT. Here, ANAMESLOT and ANAMEASLOT are meant to be used in the second form, i.e. in availableversions:ANAMESLOT:ANAMESLOT or availableversions:ANAMEASLOT:ANAMEASLOT (Mnemonic: ASLOT prints the slot always). Moreover, NAMESLOT, NAMEASLOT and DATESORT makes sense only for installed versions. See eix --dump to see the variables in detail.

markedversions:VARIABLE, markedversions:VARIABLE:VARSLOTS

This is analogous to availableversions with the difference that only marked (and available) versions are printed.

bestversion:VARIABLE, bestversion*:VARIABLE, bestslotversions:VARIABLE, bestslotversions*:VARIABLE, bestslotupgradeversions:VARIABLE, bestslotupgradeversions*:VARIABLE

This is analogous to availableversions with the difference that only the best version resp. the best versions of each slot are printed. For the variants with * also unstable versions are accepted. For the variants with upgrade only those versions are selected which probably will appear after the upgrade.

installedversions:VARIABLE

This is analogous to availableversions with the difference that only installed versions are printed.

first, last, slotfirst, slotlast, oneslot

This must occur only in VARIABLE in the context of version printing. You can use these flags to test whether you are currently printing the first or last version of the package (usually to output some additional text in these cases). Similarly, when the printing is sorted according to slots you can test whether the current version is the first or last of the current slot or if there is only one slot at all. All these properties are empty if the condition is not satisfied, otherwise 1. To ease reusing code, when printing is not sorted according to slots, then slotfirst/slotlast is equivalent to first/last and oneslot is 1.

srcuri,havesrcuri

This must occur only in VARIABLE in the context of version printing. It outputs the SRC_URI of an available version or 1, if SRC_URI is nonempty, respectively.

eapi

This must occur only in VARIABLE in the context of version printing. It outputs the EAPI of an available or installed version.

slot, isslot, fullslot, isfullslot, subslot, issubslot

This must occur only in VARIABLE in the context of version printing. It outputs the slot/subslot/both of the current version. isslot, isfullslot, issubslot just test whether the slot, fullslot, or subslot are trivial and outputs 1 in this case, otherwise nothing.

overlayver, overlaynum, overlayvername, virtual

This must occur only in VARIABLE in the context of version printing. It outputs the overlay of the current version. overlayver is the colored index of the overlay and empty if the whole package is from only one overlay; you should use overlaykey to print the overlay in such a case. overlaynum, in contrast, contains the number of the overlay without colors unconditionally (and is empty only if the version is not from an overlay). overlayplainname is the label (name) (or path if the label is unknown or empty) of the overlay; overlayplainname* considers also the main repository as an overlay, here. overlayvername and overlayvername* are analogous, but return an empty string if the whole package is from the same respository. virtual is nonempty if and only if the version is from a virtual overlay.

versionkeywords, versionkeywords*, versionekeywords

This must occur only in VARIABLE in the context of version printing. It outputs the full keywords of the current version. If the data is modified by the profile, the modified data is printed with versionkeywords*. The special form versionekeywords prints the latter if it differs from versionkeywords; otherwise, it is empty.

isbestupgrade, isbestupgrade*, isbestupgradeslot, isbestupgradeslot*

This must occur only in VARIABLE in the context of version printing. It returns 1 if the current version is the best resp. best in the current slot for upgrading. For the variants with * also unstable versions are considered.

installedversion, markedversion

This must occur only in VARIABLE in the context of version printing. It returns 1 or the empty string depending on whether the current available version is installed or marked, respectively. The test for markedversions always fails in the context of <installedversions:...>.

ishardmasked, washardmasked, isprofilemasked, wasprofilemasked, ismasked, wasmasked, isstable, wasstable, isunstable, wasunstable, isalienstable, wasalienstable, isalienunstable, wasalienunstable, ismissingkeywordwasminusasterisk

This must occur only in VARIABLE in the context of version printing. This returns 1 or empty depending whether the version has the current stability property according to the local or default configuration, respectively.

isbinary

This must occur only in VARIABLE in the context of version printing. It returns 1 or empty depending on whether there is a corresponding *.tbz2 or *.xpak file for the version.

istbz

This must occur only in VARIABLE in the context of version printing. It returns 1 or empty depending on whether there is a corresponding *.tbz2 file for the version.

ispak

This must occur only in VARIABLE in the context of version printing. It returns 1 or empty depending on whether there is at least one corresponding *.xpak file for the version.

ismultipak

This must occur only in VARIABLE in the context of version printing. It returns 1 or empty depending on whether there are at least two corresponding *.xpak files for the version.

pakcount

This must occur only in VARIABLE in the context of version printing. It returns the number of *.xpak files for the version or empty if there are none.

restrict, restrictfetch, restrictmirror, restrictprimaryuri, restrictbincheck, restrictstrip, restricttest, restrictuserpriv, restrictinstalledsources, restrictbindist, restrictparallel

This must occur only in VARIABLE in the context of version printing. It returns 1 or empty depending on whether some or the corresponding RESTRICT attribute is set for the version.

properties, propertiesinteractive, propertieslive, propertiesvirtual, propertiesset

This must occur only in VARIABLE in the context of version printing. It returns 1 or empty depending on whether some or the corresponding PROPERTIES attribute is set for the version.

depend, rdepend, pdepend, bdepend, depend*, rdepend*, pdepend*, bdepend*

This must occur only in VARIABLE in the context of version printing. It returns the respective DEPEND, RDEPEND, PDEPEND, BDEPEND string of an available package (the string is shortened if possible if the variant with * is used). This is empty unless DEP=true is set (and was set when the cachefile was created).

havedepend, haverdepend, havepdepend, havebdepend, havedeps

This is like the above with the difference that only 1 is returned if the value of the corresponding string (resp. of at least one of these) is nonempty.

havemaskreasons, maskreasons, maskreasons*

This must occur only in VARIABLE in the context of version printing. For available versions, maskreasons outputs the mask reasons and havemaskreasons whether there are some. Separators used are FORMAT_MASKREASONS_LINESKIP and FORMAT_MASKREASONS_SEP; for maskreasons* separators used are <FORMAT_MASKREASONSS_LINESKIP> and FORMAT_MASKREASONSS_SEP.

haveuse, use, use*, use0

This must occur only in VARIABLE in the context of version printing. For available versions, use outputs the IUSE variable. For installed versions, use outputs the USE flags and whether they are set (in the later case, the content of FORMAT_BEFORE_SET_USE, FORMAT_AFTER_SET_USE, FORMAT_BEFORE_UNSET_USE, FORMAT_AFTER_UNSET_USE is printed at the appropriate places). The use* variant treats USE_EXPAND variables separately and outputs them, using the content of FORMAT_BEFORE_USE_EXPAND_START, FORMAT_BEFORE_USE_EXPAND_END, FORMAT_AFTER_USE_EXPAND, FORMAT_BEFORE_IUSE_EXPAND_START, FORMAT_BEFORE_IUSE_EXPAND_END and FORMAT_AFTER_IUSE_EXPAND at the appropriate places. The use0 variant suppresses the output of USE_EXPAND variables. haveuse can be used to test whether an output would be nonempty (in this case it is 1, otherwise empty).

requireduse, haverequireduse

This must occur only in VARIABLE in the context of version printing. For available versions, it outputs the REQUIRED_USE variable, or 1 if that variable is not empty, respectively. This is empty unless REQUIRED_USE is set (and was set when the cachefile was created).

date:VAR

This must occur only in VARIABLE in the context of version printing. It outputs the installation date; the strftime() format for the date is read from the variable VAR.

version,plainversion,revision

This must occur only in VARIABLE in the context of version printing. It outputs the version (man 5 ebuild: $PVR) in text form. plainversion outputs the version without revision ($PV), and revision only the revision ($PR). In contrast to portage, revision is empty if there was no revision specified.

installed, best, best*

Is 1 or empty, depending on whether at least one version of the package is installed or has a best stable or best unstable version.

versionlines

Is 1 or empty, depending on whether the --versionlines flag was passed.

slotsorted

Is 1 or empty, depending on whether the --versionsort flag was passed.

color

Is 1 or empty, depending on whether colors/markers are printed. For instance if the output is redirected to a terminal and no opposite option is used, this will be empty.

setnames, allsetnames

The name of all local sets to which the package belongs, separated by spaces. With allsetnames also the "system" and "profile" set names are included.

binary

Is 1 or empty, depending on whether at least one version (available or installed) has a corresponding *.tbz2 file. See the remarks for --binary.

mainrepo

Is 1 or empty, depending on whether at least one available version belongs to the main repository 0 (typically: gentoo).

overlaykey, overlayname

If all versions are in the same overlay, "[overlaykey]" (in corresponding colors) or "overlaylabel" is output.

havevirtual, havenonvirtual

Is 1 or empty, depending on whether at least one available version is from a (non)virtual overlay.

system

expands to 1 if the package is in @system

profile

expands to 1 if the package is in @profile

world

expands to 1 if the package is in the world file

world_sets

expands to 1 if the package is in the world sets

marked

expands to 1 if the package name was passed with the --pipe option (no matter whether a version matches or not, see also havemarkedversion). This is mainly only useful in tests.

havemarkedversion

Is 1 or empty, depending on whether at least one available version of the package is marked. Note that it is possible that a package is marked although none of its available versions is marked.

slots, slotted

expands to 1 if there are at least two slots resp. at least one nontrivial slot.

colliuse, colliuse*, colliuse0, havecolliuse

The collected IUSE flags (i.e. their union) of all available versions of the package, separated by spaces. The colliuse* variant outputs USE_EXPAND variables separately, using FORMAT_BEFORE_COLL_EXPAND_START, FORMAT_BEFORE_COLL_EXPAND_END and FORMAT_AFTER_COLL_EXPAND at the appropriate places. The colliuse0 variant omits the output of USE_EXPAND variables. havecolliuse expands to 1 if colliuse is nonempty; this is faster than colliuse.

havebest, havebest*

Expands to 1 if the package has a best stable/unstable version.

upgrade, upgradeorinstall, downgrade, recommend, recommendorinstall

upgrade expands to 1 if the package is installed and at least one slot can be upgraded (or the best stable version is a new slot and UPDATE_TO_HIGHEST_SLOT is true). The other variables test similarly whether the package can be upgraded or newly installed, should be downgraded, can/should be upgraded/downgraded, or can/should be upgraded/downgraded/installed, respectively. The variable RECOMMEND_LOCAL_MODE determines whether these tests obey LOCAL_PORTAGE_CONFIG.

bestupgrade, bestupgradeorinstall, bestdowngrade, bestrecommend, bestrecommendorinstall

as above with the difference that only the best stable version of the package is taken into account (and not all slots).

better, worse, differ, bestbetter, bestworse, bestdiffer

this can only be used in conditionals in DIFF_FORMAT_CHANGED. better expands to 1 if the new package has a new slot or a better stable version (or the same best stable version but from a different overlay number) for some slot than the old package. worse means analogously that the old package had at least one better slot or a slot which is not available in the new package. differ means that not all best stable slots of the old and new package coincide. The corresponding best* versions have an analogous meaning with the difference that only the best stable version is taken into account (and not all slots). The variable RECOMMEND_LOCAL_MODE determines whether these tests obey LOCAL_PORTAGE_CONFIG.

old..., new...

this can only be used in DIFF_FORMAT_CHANGED. You can prefix any property name with old and new, and the value corresponds to that property, taking the old resp. new data into account. If neither old nor new is specified, the new version is assumed. For example, oldavailableversions:VAR will output the previous available versions (using the variable VAR to determine the output format) while newavailableversions:VAR and availableversions:VAR both will print the available versions of the current (i.e. new) package.

Escape sequences

\\n \\r \\t \\b \\a: These are interpreted in the usual way as in printf. Within FORMATSTRING, tabs are calculated into spaces, assuming that the FORMATSTRING is in UTF8.
\\C<COLUMN>: This special escape sequence is only admissible in FORMATSTRING. Here, COLUMN is a number (which must be enclosed in the braces). During output, this is interpreted by eix in such a way that if the column COLUMN is not yet reached during output of the current line, so many spaces are output that this is the case. Thus, in a sense, this can be considered as a powerful tabulator which does not leave the interpretation to the terminal. For the calculation of the length of the current line, it is assumed that the FORMATSTRING is in UTF8.

Colors

(COLORSTRING|COLORSTRING|...)

The effective COLORSTRING chosen depends on COLORSCHEME?. It should have the following form:

MARKER_OR_COLOR;MARKER_OR_COLOR;...

MARKER_OR_COLOR is either a marker attribute or a color name, optionally followed by ,1 (or ,0) to specify that bright color should (not) be used.

Available marker attributes are: none bold italic underline blink inverse

Available colors are: default black red green yellow blue purple cyan gray 0 ... 255

Note that gray does not work as required on all terminals and that 0 ... 255 are interpreted usefully only on 88/256 color terminals.

The first color in COLORSTRING specifies the foreground color, the second the background color.

If a foreground color is specified, all colors and attributes are reset. The empty string is defined as the color "default". In particular, () means that all colors and attributes are reset.

If you want that nothing is actually output or reset, specify the attribute (none).

Examples:

eix --format '{installed}(yellow,1;underline){else}(yellow,0){}<name>()\n' ...

If the package ... is installed, print the name underlined in bright yellow, else in normal yellow.

INSTFORMAT='{first}:{}<version> <date:DATEFORMAT>{!last}\n\t{}' DATEFORMAT='%x' eix --format '<category>/<name><installedversions:INSTFORMAT>\n' 'autom*'

This will print for every autom* package the category name, and if it is installed, it will also print the installed versions and the installation day. One could have obtained the same result by omitting {!last}\t\n{} and writing instead {first}:{else}\t\n{}, since it is of course the same whether \t\n is printed at the end of each version except the last or at the beginning of each version except the first.

FORMAT='{downgrade}%{FORMAT_ALL}{}' eix -I

This will print all installed packages for which there are downgrade recommendations. Note that FORMAT='{downgrade}%{FORMAT}{}' does not work, because this would be a self-referential definition in the delayed substitution: Of course, a variable cannot be defined by an expansion of itself. For this reason, the content of FORMAT and similar variables has become very simple since eix-0.13.4: It is just %{FORMAT_ALL} (and similarly for other variables). So one can easily insert the full definition of the original value of FORMAT (which we have done in the above example).

Note that if you want to have compact output in the above example, you cannot just append the option -c, because appending this option just has the effect that for the format string the variable FORMAT_COMPACT is used instead of FORMAT. So, to have compact output, you should use either

FORMAT_COMPACT='{downgrade}%{FORMAT_ALL_COMPACT}{}' eix -Ic

or even simpler and with the same effect:

FORMAT='{downgrade}%{FORMAT_ALL_COMPACT}{}' eix -I

A much simpler possibility to avoid the self-reference is in the above example usage of the --format option:

eix --format '{downgrade}%{FORMAT}{}' -I

or, for compact output,

eix --format '{downgrade}%{FORMAT_COMPACT}{}' -I

respectively.

FILES

/etc/eix-sync.conf

This file stores commands and configurations to apply with eix-sync. Comment lines start with #. Lines can have the following forms and will be executed in the given order before emerge --sync is executed.

Note that the content of the variable EIX_SYNC_CONF is appended to that file. By default, the latter expands to EIX_SYNC_OPTS so that also that variable is appended to that file. Both variables can be used to modify the defaults set in /etc/eix-sync.conf. Be aware that a lot code of these lines is evaluated when eix-sync is executed, so take care about security!

option(s)

Use option(s) as default for eix-sync (in front of all other options). As usual, option(s) must start with "-". option(s) will be evaluated by the shell in the eix-sync script, so take care about security and be sure to quote shell command separators properly!

Name

Call layman -s Name. Note that layman is provided by app-portage/layman to sync overlays.

*

Call layman -S (i.e. all overlays are synced with layman).

!command

Evaluate command within the eix-sync shell script (in the same shell). command must exit successfully or eix-sync will print a warning. (Thus, !layman Name is more or less equivalent to Name.) Close e.g. the command with "; true" if you want that the exit status is ignored. The warning becomes even a fatal error with the option -F. You can set FATAL_HOOKS to a nonempty/empty value to force/cancel -F for the currently and subsequently executed hooks. If you want only the current hook to exit with an error, you can call die explicitly.

You can use this feature to unpack e.g. an overlay before calling layman or to apply local fixes after layman was called. You can also set the variable have_changed=: here to tell eix-sync that some overlay has changed. (Otherwise eix will stop with exit code 3 if the main portage tree did not change.)

In contrast to earlier eix versions, command does not output anything (use einfo if you want that), and it is not evaluated within a subshell, i.e. you can also modify environment variables or begin/end redirection as you like. The disadvantage is that you can also easily override internal eix-sync variables or functions by accident; if in doubt, put your command in braces (...) to start it in a subshell.

!!command

This is similar to ! command with the difference that command is unconditionally executed, i.e. even if options -d, -u, or -l are used. It is meant to set environment variables for the other programs.

~command

This is only important if eix-sync options -s or -2 are used. In this case, command will be executed before the first call of rsync; the output of command is evaluated within the eix-sync shell. If command or the evaluation of its output are not successful, eix-sync will print a warning (or error out if -F is active, i.e. if FATAL_HOOKS is nonempty). This can be used to execute e.g. keychain and to return the content of the appropriate ~/.keychain/*-sh file or to return export-commands for the current SSH_AUTH_SOCK and SSH_AGENT_PID. It is also admissible that the output of command is a command which modifies the variables PORTAGE_RSYNC_OPTS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR, PORTDIR_SERVER, PORTDIR_CLIENT, SERVER, or CLIENT. These variables are filled with defaults when command is called and will later be used for the rsync command(s) with their obvious meaning.

@command

Adds a hook for command; the actual execution of command is postponed until emerge --sync was (successfully) called.

@@command

Adds a hook for command; the actual execution of command is postponed until emerge --sync and the subsequent eix-update was (successfully) called.

Here is a schematic overview of the order of hooks/commands:

!! hooks

cp /var/cache/eix/portage.eix /var/cache/eix/previous.eix

layman calls and ! hooks in order of /etc/eix-sync.conf

~ hooks

emerge --sync

@ hooks

eix-update

@@ hooks

eix-diff

Some examples of useful lines in /etc/eix-sync.conf:

-F

Always error out on layman/hook errors. This was always the case in earlier eix versions.

-C --ignore-default-opts

Use this line if you have --ask in EMERGE_DEFAULT_OPTS in /etc/portage/make.conf but do not want to get asked for eix-sync.

-r -M

Use this if you use e.g. PORTDIR_CACHE_METHOD=assign, and FEATURES=metadata-transfer is inactive or disabled (the latter is the default in newer portage versions). Depending on your needs you might want to use also -r or -M alone or replace -M by the line

@StatusInfo...[statusline]

Announce that the next command will be ... (sets hardstatus line and output info for user.)

@Statusline...

As above, but set only hardstatus line.

@einfo...

As above, but output only info to user.

@eix-remote fetch1

Download remote1 data with every call of eix-sync.

@emerge --regen

to use emerge --regen instead of emerge --metadata.

@egencache --repo=local --update

Update the metadata cache of the overlay with repository name "local" before eix-update is called but after calling emerge --sync. This can make sense if you want to use cache method metadata-md5 or metadata-flat for that overlay and want to make sure that this metadata cache is up-to-date. The disadvantage in case of metadata-flat is that this egencache command is executed even if "local" was not changed (which is usually the case for local repositories).

!egencache --repo=foo --update

Update the metadata cache of the overlay with repository name "foo"; this makes sense if you had earlier a line foo or a line !command to update foo for updating this repository (by layman or by some other command) and if you want to use cache method metadata-flat for that overlay although the metadata cache is broken or not contained in that repository.

!!exec >/var/log/eix-sync.log ; chown portage: /var/log/eix-sync.log || true

Send the output to a logfile (with correct permissions). The "true" at the end is to force continuing even if the "chown" failed. If you do not want to redirect the output of the final eix-diff, you might want to combine this with

@@exec >/dev/tty

Output the eix-diff stat to the terminal, even if redirection occurred.

@@exit 0

Do not execute eix-diff at all.

!!export FORCE_USECOLORS=${FORCE_USECOLORS:-true}

Unless FORCE_USECOLORS is set differently in your environment, eix output will be colored even if you use redirection.

~keychain --quiet ~/.ssh/id_rsa ; cat ~/.keychain/`hostname`-sh

/etc/eixrc

Global configuration file. The variables in ~/.eixrc or from the environment can override the variables set in this file. See ~/.eixrc.

EIXRC

If this environment variable is set, its value is used instead of the filename /etc/eixrc to read the configuration data. In this case, the file ~/.eixrc is ignored (but you can of course source it if you want it).

EIX_SYNC_OPTS, EIX_SYNC_CONF, EIX_REMOTE_OPTS, EIX_LAYMAN_OPTS, EIX_TEST_OBSOLETE_OPTS

Although these variables are usually set in ~/.eixrc (and are therefore described in the corresponding section), these variables are pointed out here because they are exceptionally security relevant: They (or at least part of them) are evaluated by the shell if you call the scripts with the corresponding name. Thus, be sure that they are not compromised when you call these scripts with root permissions.

~/.eixrc

Per-user configuration file. The variables in this file can be overridden by environment variables. You can use a shell-like syntax to set the following variables. In particular, you can source other files and you can use auxiliary variables to set other variables.

However, if you use auxiliary variables as usual, you will only see the substituted values with --dump or --dump-defaults and you cannot replace the inserted values e.g. by setting them in the environment.

For this reason, you can refer to variables besides the usual shell-way also in the syntax %{VARIABLE} (the braces here are not optional). This means that the substitution is delayed until all configuration files and environment variables are read, and the substitution will not show up with --dump or --dump-defaults.

This concept is called delayed substitution/reference, and provides also some additional features:

Special symbols for delayed substitution

%{%

This must be used if you need %{ in a variable text (otherwise delayed substitution would take place).

*VARIABLE

If a delayed reference uses a variable name starting with *, this * is replaced by EIX_, DIFF_, UPDATE_, or DROP_, depending on whether it is used from eix/eix-diff/eix-update, or eix-drop-permissions, respectively. This way you can have different defaults for these programs.

For example, the delayed reference %{*VARIABLE} will insert the expansion of EIX_VARIABLE, DIFF_VARIABLE, UPDATE_VARIABLE, or DROP_VARIABLE, respectively.

The \ and * attributes can be combined (order plays no role), and you can also combine it with an APPENDIX.

As a practical example, if you want that EIX_USER has the value "nobody" when called from eix-drop-permissions (e.g. from eix-remote) but the default value "portage" otherwise, you can set:

EIX_USER=%{*EIX_USER}

EIX_EIX_USER=portage

DIFF_EIX_USER=portage

UPDATE_EIX_USER=portage

DROP_EIX_USER=nobody

\VARIABLE

If a delayed reference uses a variable name starting with \, all \ or [\n\r\t ] symbols of the (expanded) VARIABLE content are considered as escaped.

In particular, the delayed reference %{\VARIABLE} can be used in string list variables like CACHE_METHOD or EIX_LOCAL_SETS, ensuring that VARIABLE produces at most one entry "as is", even if it should contain spaces or \ characters.

The \ and * attributes can be combined (order plays no role), and you can also combine it with an APPENDIX.

*VARIABLE APPENDIX

This is only recognized if APPENDIX starts with one of the symbols , or ;. In this case, APPENDIX is appended to the content of VARIABLE and in addition in front of all | symbols within that content. (The APPENDIX can be combined with the \ and * attributes.) APPENDIX is taken as-is, and it must not contain the symbol }. The purpose of APPENDIX is to make writing colors simpler. Example:

COLOR_DEFAULT=blue|27

FORMAT="(%{COLOR_DEFAULT,1)A (%{COLOR_DEFAULT;invert})B"

BAD_FORMAT=(%{COLOR_DEFAULT},1;invert)A

In this example, FORMAT will expand to

(blue,1|27,1)A (blue;invert|27;invert)B

while BAD_FORMAT will expand to

(blue|27,1;invert)A

The latter is probably not what was intended if COLORSCHEME?=0.

Conditional blocks in delayed references

If you want to substitute several variables completely differently, depending on the state of a (Boolean) variable, you can use conditional blocks.

This is somewhat analogous to Conditional Blocks in FORMATSTRING: If the referenced variable expands finally to the Boolean value true (true/1/yes/y/on) (resp. to something nonempty if you preceed VARIABLE with an additional ?) the result is true and the corresponding block of the string is expanded. Conditions can be negated so that the else-part is expanded if the condition is true, and the if-part if the condition is false. The else-part can be also be completely left out. The special variable names *VARIABLE (instead of VARIABLE) can also be used in these conditionals.

%{?VARIABLE}TCODE%{}: Expand TCODE if VARIABLE expands to true.
%{??VARIABLE}TCODE%{}: Expand TCODE if VARIABLE expands to a nonempty string.
%{!VARIABLE}TCODE%{}: Expand TCODE if VARIABLE expands to false.
%{!?VARIABLE}TCODE%{}: Expand TCODE if VARIABLE expands to the empty string.
%{?VARIABLE}TCODE%{else}FCODE%{}: Expand TCODE if VARIABLE expands to true, otherwise FCODE.
%{??VARIABLE}TCODE%{else}FCODE%{}: Expand TCODE if VARIABLE expands to a nonempty string, otherwise FCODE.
%{!VARIABLE}TCODE%{else}FCODE%{}: Expand TCODE if VARIABLE expands to false, otherwise FCODE.
%{!?VARIABLE}TCODE%{else}FCODE%{}: Expand TCODE if VARIABLE expands to the empty string, otherwise FCODE.
A conditional block must occur completely within one variable, i.e. it is not possible to e.g. substitute the %{} symbol from another variable via delayed reference (but in TCODE/FCODE delayed references can be used).

Note that any variables you add for delayed substitution are only output with --dump if they are actually used (i.e. referenced in some of the other variables). If you want to output them anyway, e.g. for comments or easier later change, you can collect references to them in the DUMMY variable.

The following variables do not contain those which are used only in delayed references. To get a full description of the latter (and of the defaults), please use eix --dump.

Some remarks concerning the stability of names in future eix versions: As far as possible and reasonable, it is attempted to keep all meanings of the names, at least for the variables in the subsequent list. For variables for delayed substitution, changes are more likely to occur. As a rule of thumb: The more "elementary" a variable is (e.g. a variable defining just a single character) the less likely is that it is changed or removed in a future eix version. On the other hand, variables with delayed substitution in the "middle range" (that is, those using other variables for delayed substitution) are more likely to be changed in their meaning or to be removed - depending which extensions in the format will be necessary to implement future extensions of eix.

DUMMY (string)

This variable has no direct influence on the programs, but the content of this variable can be used to collect delayed references to (otherwise unused) variables so that they are printed with --dump or --dump-defaults.

WIDETERM (true/false/auto/empty)

This variable is only used for delayed substitution. It defines whether you have a wide terminal (bigger than 80 columns). In WIDETERM is empty or auto then COLUMNS is used to set its value for delayed substitution.

COLUMNS (integer/auto/empty)

This defines the terminal width if WIDETERM is empty. If COLUMNS is empty or auto then a heuristic is used for WIDETERM. If the heuristic fails then the substituted value of WIDETERM is empty (which acts as false for delayed substitution).

EIX_SYNC_OPTS, EIX_SYNC_CONF (string)

The content of EIX_SYNC_CONF is appended to the file @SYSCONFDIR/eix-sync.conf See the description of that file for details. By default, EIX_SYNC_CONF is a delayed substitution of EIX_SYNC_OPTS so that typically you can also use EIX_SYNC_OPTS with the same purpose. Be aware that if one of these variables is compromised, almost anything can happen if you call eix-sync with root permissions, so be aware of security risks! Quote these variables carefully if you use them!

EIX_REMOTE_OPTS, EIX_LAYMAN_OPTS, EIX_TEST_OBSOLETE_OPTS (string)

The content of this variable is evaluated and used as arguments for the scripts eix-remote, eix-layman, and eix-test-obsolete, respectively. So be sure to quote these variables correctly and be aware of security risks!

EIXRC_SOURCE (string)

This path is prepended to source commands in /etc/eixrc. It is meant to be set in the environment but can also be set in /etc/eixrc. In the latter case, it will override the setting from the environment as soon as it is read until all files are sourced. Note that when this variable takes effect, no delayed substitution is performed yet.

EIX_PREFIX (prefix-string) (prefix-string means that this is a string, but if it has the value '/' it is changed to '')

This is essentially meant to be set in the environment if you want to use a chroot: It is prefixed to the path where /etc/eixrc is searched. If it is unset, the value of the environment variable PORTAGE_CONFIGROOT is prefixed. The default value (typically empty) of this variable is used, if neither is set in the environment.

Moreover, this variable is used for delayed substitution to determine the prefix of a lot of paths in the subsequent variables; see eix --dump to see in detail in which other variables it occurs.

EPREFIX (prefix-string)

The default value of this variable stems from EIX_PREFIX, appended with a configure-specific default (for prefix-portage). This variable has no meaning on its own, but it is used for delayed substitution to determine the prefix of a lot of paths in the subsequent variables (if their default is not changed); see eix --dump to see in detail in which other variables it occurs. In the current default, it influences all paths with the following exceptions:

TMPDIR (string)

This is used for delayed substitution in EIX_TMPDIR. Usually it is set by the environment variable. eix exports this variable initialized with the value of EIX_TMPDIR.

EIX_TMPDIR (string)

If this variable is nonempty, this directory is used instead of /tmp for temporary files. eix exports this variable as TMPDIR. The default is via delayed substitution to TMPDIR.

/usr/bin/eix-functions.sh

~/.eixrc

cachefile path(s) passed in the commandline

PORTAGE_PROFILE (only the variable, not the link)

PORTDIR

Overlay paths

The last three items can be modified by EPREFIX_TREE.

The purpose of EPREFIX is to allow a quasi-chroot analogously to prefix-portage.

ROOT (prefix-string)

EPREFIX_TREE (prefix-string)

EPREFIX_ROOT (prefix-string)

These are actually not internal variables of eix but they are just used for delayed substitution for the following variables analogously to EPREFIX (see above).

The purpose of ROOT is to follow roughly portage's usage of this variable. Note that variables in /etc/portage/make.conf do not influence eix configuration variables. In particular, a ROOT=something command in /etc/portage/make.conf does not influence eix. You must set it instead in the environment or in an eix configuration file.

You can easily customize to which paths the EPREFIX or ROOT variables apply: Simply use in the appropriate following variables either the delayed references %{EPREFIX}, %{ROOT}, nothing, or %{EPREFIX_ROOT} (which in turn is defined as a delayed reference so that you can easily change what to do if EPREFIX and ROOT are both nonempty: You might e.g. concatenate these paths or use only one of them). You can of course also use other variables as delayed references, e.g. you might want to set

EIX_CACHEFILE=%{EPREFIX_PROFILE}/var/cache/eix/portage.eix

if you feel that the eix cachefile should depend (only) on the profile root.

PORTAGE_CONFIGROOT (prefix-string)

This path is prepended to the /etc paths. The purpose is to respect PORTAGE_CONFIGROOT in an analogous way portage does. If you set this variable in the environment it will also change the path where /etc/eixrc is searched. (Note that reading /etc/eixrc occurs before delayed substitution takes effect.)

MAKE_GLOBALS (string)

If this file exists, it is used instead of %{PORTAGE_CONFIGROOT}/etc/make.globals The default value corresponds to >=portage-2.2* behavior.

PORTAGE_REPOS_CONF (string)

This file is used to set the default repository information. The file /etc/portage/repos.conf is read only after this.

PORTAGE_REPOSITORIES (string)

If this variable is nonempty, its content is used as by portage as a substitute for all repos.conf files.

EPREFIX_PORTAGE_EXEC (prefix-string)

This path might be used as a prefix for /usr/bin/ebuild.

EPREFIX_SOURCE (prefix-string)

This path is prepended to paths occurring as the argument of source commands in /etc/portage/make.conf and /etc/make.globals.

EPREFIX_INSTALLED (prefix-string)

This is prepended to the path where eix expects information about installed packages.

EPREFIX_PORTAGE_CACHE (prefix-string)

This prefix is prepended to the portage cache.

EPREFIX_ACCESS_OVERLAYS (prefix-string)

This prefix is prepended to overlays when their files are accessed.

EPREFIX_PORTDIR (prefix-string)

This path is prepended to PORTDIR.

EPREFIX_OVERLAYS (prefix-string)

This prefix is prepended to all entries of PORTAGE_OVERLAY.

EPREFIX_PROFILE (prefix-string)

This prefix is prepended to PORTAGE_PROFILE (the variable, not the link).

EPREFIX_VIRTUAL (prefix-string)

This is prepended to overlays in the eix database to test whether they exist.

EIX_CACHEFILE (string)

The eix cachefile, usually %{EPREFIX}/var/cache/eix/portage.eix

EIX_PREVIOUS (string)

The previous eix cachefile for eix-diff and eix-sync, usually %{EPREFIX}/var/cache/eix/previous.eix

EIX_REMOTE1, EIX_REMOTE2 (string)

The eix cache used when -R or -Z is in effect. If the string is nonempty, eix-remote uses this file for the output. The default value is %{EPREFIX}/var/cache/eix/remote.eix or %{EPREFIX}/var/cache/eix/remote.eix, respectively.

REMOTE_DEFAULT (integer)

The value 1, 2, or 0 means that eix option -R, -Z, or neither is the default.

EIX_REMOTEARCHIVE1, EIX_REMOTEARCHIVE2 (string)

This is a local copy of the remote archive used by eix-remote. If it is empty, only temporary files are used.

EBUILD_DEPEND_TEMP (string)

Path to the file which is generated by ebuild depend.

EIX_WORLD (string)

The file eix considers as the world file. Note that usually this file is only readable if you are a member of the portage group. To avoid needing this permissions you can use SAVE_WORLD.

EIX_WORLD_SETS (string)

The file eix considers as the world_sets file. The same remarks as for EIX_WORLD hold true.

EIX_LOCAL_SETS (string list)(the meaning of string list is explained in the next paragraph)

This is a list of directories which contain locally defined sets. The directories are read in the given order; files with set-names which have been read earlier are ignored: In this sense earlier entries in EIX_LOCAL_SETS take precedence over later entries.

Relative directories (i.e. those not starting with /) are understood relative to $PORTDIR. Entries in EIX_LOCAL_SETS starting with the special symbol * are interpreted in a special way: They are interpreted as several entries, the * symbol being replaced successively by the paths to the overlays in reverse order (the latter in view of the fact that in a sense earlier entries of EIX_LOCAL_SETS override later entries while for PORTDIR_OVERLAY one expects the converse).

The default of this variable contains /etc/portage/sets, /etc/portage/sets.eix, sets (i.e. roughly $PORTDIR/sets according to the previous paragraph), */sets (i.e. roughly $PORTIDR_OVERLAY/sets according to the previous paragraph) as well as %{EIX_LOCAL_SETS_ADD}. The reason for the latter is that you can just add additional directories to the variable %{EIX_LOCAL_SETS_ADD} in /etc/eixrc. Reasons why you might want to do this is e.g. if you defined another multiset directory (e.g. for some overlay or for treatment with "world-candidate = False") in /etc/portage/sets.conf or in the sets.conf file of some overlay.

For all string list variables, the possible separators between different entries are [ \t\r\n]. If you want to use such a separator within an entry, you have to escape it by \. Moreover, all \ symbols have to be escaped analogously, since the escapes of escapes and escapes of the separator symbols are removed. If you want to insert a variable "as-is", you can make use of delayed substitution: %{\VAR} will insert the value of VAR with all symbols from [\ \t\r\n] being escaped. (See delayed substitution for more details).

EAPI_REGEX

This regular expression matches the recognized EAPIs in .ebuild suffixes which will be recognized according to GLEP 55. You might need to modify this expression locally according to the installed portage version (in order to make sure that the installed portage can parse the corresponding EAPIs). An exceptional case is if that variable is empty: In this case all EAPI-suffixed ebuilds are ignored.

SAVE_WORLD (true/false)

If you set this to true, the information of your world file is stored in /var/cache/eix/portage.eix. Note that this means that anybody who can read this file has the information about the content of your world file. Make sure that this is really what you want if you set this to true.

CURRENT_WORLD (true/false)

If false, then the world file information stored in /var/cache/eix/portage.eix is used, even if your current world file is readable. Otherwise, your current world file (if it is readable) overrides that information.

EIX_USER, EIX_GROUP, EIX_UID, EIX_GID (string/integer)

eix, eix-diff, eix-update, eix-drop-permissions, and eix-remote change to the permissions of EIX_USER/EIX_GROUP (using the ID-numbers EIX_UID/EIX_GID if the former have no valid name) as soon as possible. To avoid this change, use an invalid name (e.g. the empty name) and a non-positive ID-number.

If EIX_GROUP is valid or EIX_GID is positive, then also the grouplist is changed according to the following rule: If EIX_USER is a valid name, the full grouplist of that user is chosen; otherwise, the grouplist is shrinked to a singleton.

REQUIRE_DROP (true/false/root)

If true, it is required that the dropping of permissions according to EIX_{USER,GROUP,UID,GID} is successful, see DROP_FATAL. If root, this is required only if the current UID is 0.

NODROP_FATAL (true/false)

If the requirement of REQUIRE_DROP is not met, a warning (false) or an error (true) is raised.

PORTAGE_ROOTPATH (string)

If nonempty, this variable is passed unchanged to ebuild.sh for cache method ebuild*.

DEFAULT_ARCH (string)

The default ARCH if none is specified by the profile.

NOFOUND_STATUS (integer)

This value is used as exit status if there are 0 matches. The value of COUNT_ONLY_PRINTED is honoured.

MOREFOUND_STATUS (integer)

This value is used as exit status if there are 2 or more matches. The value of COUNT_ONLY_PRINTED is honoured.

EIX_LIMIT, EIX_LIMIT_COMPACT (integer)

As a safety measurement for typos there are never more packages displayed than specified here: There are two different variables, depending on whether --compact is active. There is no limit if the output is not sent to a terminal or if the value of the variable is 0.

QUICKMODE (true/false)

If true, eix and eix-diff will use --quick by default.

CAREMODE (true/false)

If true, eix and eix-diff will use --care.

USE_BUILD_TIME (true/false)

Whether to use the BUILD_TIME entry (if it exists) of the portage database instead of the directory timestamp (which usually is the installation time). The difference is usually only important for packages installed from *.tbz2 or *.xpak files, but in most cases the build time is more relevant (it is also more reliable). Unfortunately, the build time is available only for packages built and emerged with >=portage-2.2_rc63; you can use eix-installed [no-]buildtime to check for which versions this is (not) the case. Reading the build time is always slower than using the directory timestamp (even if the build time is not available). Thus, you might want to set this variable to false if speed of eix is more important to you than the buildtime information.

QUIETMODE (true/false)

If true, eix and eix-diff will use --quiet by default.

PRINT_APPEND (string)

This string is appended to the output of --print. Standard escape sequences in this string like \n are interpreted. The default is a newline for reasonable output in an interactive shell. Note that command substitution in shell scripts removes all trailing spaces so that this newline does not harm (but trailing spaces of the variable would be removed in the shell script anyway). Hence, in order to read variables from eix in a shell script without omitting trailing spaces, you should use a visible symbol for PRINT_APPEND and use for instance something like VAR=`PRINT_APPEND=x eix --print VAR` ; VAR=${VAR%x}

DEFAULT_FORMAT (normal/compact/verbose)

Defines whether --compact or --verbose is on by default. Since this variable can be changed by the user in /etc/eixrc or ~/.eixrc, this might have undesired side effects for scripts setting FORMAT with the intention to get a fixed FORMATSTRING: Such scripts should better use the --format option (which ignores DEFAULT_FORMAT since eix-0.29.6), use the --normal option (available since eix-0.29.6), and/or export DEFAULT_FORMAT=normal to override such user settings.

DIFF_ONLY_INSTALLED (true/false)

If true, eix-diff will only consider version changes for installed packages.

DIFF_NO_SLOTS (true/false)

If true, eix-diff will not consider slots for version changes.

DIFF_SEPARATE_DELETED (true/false)

If true, eix-diff will print deleted packages in a section on their own. Otherwise, eix-diff will mix deleted and changed packages "alphabetically".

NO_RESTRICTIONS (true/false)

If false, RESTRICTION and PROPERTIES data is output.

RESTRICT_INSTALLED (true/false)

If true, fetch and mirror restrictions for installed versions are calculated.

CARE_RESTRICT_INSTALLED (true/false)

If true, fetch and mirror restrictions for installed versions are always fetched from disk, even if it could be read from a corresponding version. This is slower but more reliable, i.e. it will also find out whether restrictions were changed.

DEPS_INSTALLED (true/false)

If true, depdendency information for installed versions are always fetched from disk, even if it could be read from a corresponding version. The option --deps-installed does the same.

DEP (true/false)

If true, store/use DEPEND, RDEPEND, PDEPEND, BDEPEND (e.g. shown with eix -lv). Usage of DEP roughly doubles disk resp. memory requirements.

SRC_URI (true/false)

If true, store/use SRC_URI. Usage of SRC_URI roughly doubles disk resp. memory requirements.

REQUIRED_USE (true/false)

If true, store/use REQUIRED_USE (e.g. shown with eix -l). Usage of REQUIRED_USE increases disk and memory requirements.

FORMAT, FORMAT_COMPACT, FORMAT_VERBOSE (string)

Define the normal, compact and verbose layout for results printed by eix. See FORMATSTRING. If one of these variables is set in a script, it is recommended to set simultaneously the corresponding value of DEFAULT_FORMAT.

Since eix-0.13.4 these variables just expand to delayed substitution of the variables FORMAT_ALL, FORMAT_ALL_COMPACT, or FORMAT_ALL_VERBOSE, respectively. The intention of this simple definition is that it is very easy to refer to the default definition when you change the definition of FORMAT.

FORMAT_TEST_OBSOLETE (string)

The format used by the eix-test-obsolete script; the default value is the delayed substitution of FORMAT_ALL_COMPACT. It is not admissible to use delayed substitution of FORMAT here; if you want this use instead delayed substitution of FORMAT_ALL.

DIFF_FORMAT_NEW, DIFF_FORMAT_DELETE, DIFF_FORMAT_CHANGED (string)

Define the format for packages that were added, removed or for which the highest stable versions has changed. This is only used by eix-diff. See FORMATSTRING. Since eix-0.13.4 these variables just expand to delayed substitution of the variables DIFF_FORMAT_ALL_NEW, DIFF_FORMAT_ALL_DELETE, or DIFF_FORMAT_ALL_CHANGED, respectively.

FORMAT_INSTALLATION_DATE, FORMAT_SHORT_INSTALLATION_DATE

Define the strftime() format used to print the installation date (in normal resp. short form).

FORMAT_INSTALLED_USE

Define the printf-like format used to print useflags of installed packages. If this string is empty, the processing is slightly faster since then these data are not read.

FORMAT_BEFORE_SET_USE, FORMAT_AFTER_SET_USE, FORMAT_BEFORE_UNSET_USE, FORMAT_AFTER_UNSET_USE

These strings are printed before/after the set/unset USE flags of installed versions are printed.

FORMAT_BEFORE_USE_EXPAND_START, FORMAT_BEFORE_USE_EXPAND_END, FORMAT_AFTER_USE_EXPAND, FORMAT_BEFORE_IUSE_EXPAND_START, FORMAT_BEFORE_IUSE_EXPAND_END, FORMAT_AFTER_IUSE_EXPAND

These strings are printed at the start/end or after USE_EXPAND variables are output with use* for installed or available versions, respectively.

FORMAT_BEFORE_COLL_EXPAND_START, FORMAT_BEFORE_COLL_EXPAND_END, FORMAT_AFTER_COLL_EXPAND

These strings are printed at the start/end or after USE_EXPAND variables are output with colliuse*.

FORMAT_MASKREASONS_LINESKIP, FORMAT_MASKREASONS_SEP, FORMAT_MASKREASONSS_LINESKIP, FORMAT_MASKREASONSS_SEP

There string are used as separator for new lines resp. new reasons for <maskreasons> and <maskreasons*>, respectively.

COLOR_OVERLAYKEY, COLOR_VIRTUALKEY, COLOR_KEYEND, COLOR_OVERLAYNAME, COLOR_OVERLAYNAMEEND, COLOR_NUMBERTEXT, COLOR_NUMBERTEXTEND

These colors are used before/after normal/virtual overlay keys, for printing the overlays at the end or when printing the number of packages.

NOCOLORS (true/false)

Do not use colors.

NOSTATUSLINE (true/false)

Do not update status line.

NOPERCENTAGE (true/false)

Do not show percentage progress.

FORCE_COLORS (true/false)

Use colors even when stdout is not a terminal.

FORCE_STATUSLINE (true/false)

Update the status line even when stdout is not a terminal.

FORCE_PERCENTAGE (true/false)

Show the percentage progress even when stdout is not a terminal.

STYLE_VERSION_SORTED (true/false)

Defines whether --versionsort is on by default.

STYLE_VERSION_LINES (true/false)

Defines whether --versionlines is on by default.

DUP_PACKAGES_ONLY_OVERLAYS (true/false)

Defines whether duplicate package checks occur only among overlays, i.e. a package is only considered as duplicate if it occurs in at least two different overlays.

DUP_VERSIONS_ONLY_OVERLAYS (true/false)

Defines whether duplicate version checks occur only among overlays, i.e. a version is only considered as duplicate if it occurs at least twice in overlays.

DEFAULT_IS_OR (true/false)

If several pattern arguments occur without logical concatenation (-a or -o), eix assumes an implicit concatenation. If this variable is true, it assumes that this concatenation is -o (or), otherwise -a (and).

OVERLAYS_LIST (all/all-if-used/all-used/all-used-renumbered/no)

People with many different overlays do not want to see all overlays listed at the end but only those which are really used. Here, you can customize the behaviour. The value is interpreted as follows:

all-if-used/if-used/if: Display all overlays, if at least one is used. This was the default behaviour before eix-0.6.0.
used-renumbered/renumber/renumbered/number: Display only the overlays actually used, numbering them "correctly" (i.e. if only two overlays are needed, number them [1] and [2]). The disadvantage is that overlays get different numbers for different queries. However, the order of the numbering is consistent.
all-used/only-used/used: Display only the overlays actually used, keeping the numbering consistent over all queries (on the same database).
no/false: Never display a list of overlays.
anything else: List all overlays for every query (even if not even one is needed).

TERM (string)

The current terminal. Usually this is set by the environment variable.

TERM_STATUSLINE (string)

This is a list of (space-separated) words; if one of these words matches the beginning of TERM, it is assumed that the terminal supports a status line.

TERM_SOFTSTATUSLINE (string)

This is a list of (space-separated) words; if one of these words matches the beginning of TERM, and if the statusline is active, also a soft status line (used e.g. by screen but not by tmux) will be output.

EXIT_STATUSLINE (string)

If this is nonempty, it is used as the exit statusline. An optional leading space in this string is ignored.

TERM_ALT1, TERM_ALT2, TERM_ALT3 (string list)

This is a list of regular expressions; if one of it matches TERM, then COLORSCHEME1, COLORSCHEME2, or COLORSCHEME3, respectively, is used instead of COLORSCHEME0, the biggest matching number taking precedence.

You are of course free to assign any meaning, but the intention of the defaults is that no match means 8/16 colors, TERM_ALT1 specifies the 256 color terminals, TERM_ALT2 specifies 88 color terminals, and TERM_ALT3 is free for the user (therefore overriding everything else).

The default expansion of TERM_ALT1 and TERM_ALT2 include the values of TERM_ALT1_ADD and TERM_ALT2_ADD via delayed substitution. So when you just want to add something to the default lists, add it to TERM_ALT?_ADD.

EXAMPLE 1: If you want to force 8/16 colors on all terminals you can set TERM_ALT3=. to select all terminals for the COLORSCHEME3 default (which is COLORSCHEME0, see below). Users of Ethan Schoonover's solarized colorscheme should only do this if they want to force keeping the original 16 solarized colors. Setting SOLARIZED (see the separate description) has influence anyway.

EXAMPLE 2: If you want to tell eix that TERM=rxvt means a 256 color terminal, set TERM_ALT1_ADD=rxvt. (This is no longer the default, because there are rxvt versions which support only 88 colors and set TERM=rxvt; thus assuming 256 colors would produce completely broken colors.)

SOLARIZED (true/light/dark/false)

This variable is only used in delayed substitution in the default values of the COLORSCHEME? variables: If SOLARIZED is not false (i.e. true, light, and dark, are currently equivalent for eix) then the default in these variables chooses a colorscheme which assumes that the terminal output uses Ethan Schoonover's Solarized colorscheme (light or dark). There is even a solarized scheme available for 256 colors: If your terminal supports it, additional colors besides the 16 solarized colors are used. This is somewhat against Ethan Schoonover's original philosophy about solarized, but eix carries so much information in colors that this extension appears reasonable. It is attempted to keep the usage of additional colors as nonintrusive as possible, e.g. to use these colors mainly for single symbols/flags.

COLORSCHEME0, COLORSCHEME1, COLORSCHEME2, COLORSCHEME3 (list of integers)

Which of these variables is actually used depends on which TERM_ALT? matches TERM; if none matches, then COLORSCHEME0 is used.

The integer value of this variable determines the color scheme to be used; if the variable contains two integer numbers (separated by spaces) then the first/second number is used if darkmode is on/off (cf. DARK and TERM_DARK).

The value 0 means that the first COLORSTRING of each color specification is used; for higher numbers a correspondingly later COLORSTRING is used. If the number is too high, the first COLORSTRING is used.

The default values of the COLORSCHEME? variables honour the values of the variable SOLARIZED: If SOLARIZED is set then the default is to use a colorscheme which was developed based on Ethan Schoonover's Solarized system colors (both, light and dark mode are supported; in 256 color capable terminals additional colors were added). Note that this only gives a reasonable output if the terminal was previously configured to use the solarized colors as system colors.

The numbers in the default settings are:

0: Dark basic scheme (for black background)

1: Dark scheme for 256 colors

2: Light basic scheme (for white background)

3: Light scheme for 256 colors

4: Solarized extended for 256 colors (light or dark)

5: Solarized original (16 colors, light or dark)

The variables BG0, BG1, BG2, BG3 are honoured by the defaults with delayed substitution to force the background color for the corresponding schemes. The default of the BG? variables is "none": No background color should be forced. If you want to force the correct background colors, set the variables as follows:

BG0=black

BG1=black

BG2=white

BG3=white

(Depending on your eix version, some of these are even the defaults). However, this can have undesired effects on transparent terminals or when scrolling is necessary, see the BUGS section. For these side effects it can be desirable/undesirable - depending on your taste and terminal - to set RESET_ALL_LINES=false or RESET_ALL_LINES=true (the default can depend on the eix version).

The default values of the COLORSCHEME? variables are:

COLORSCHEME0: 0 2; meant for 8/16 color terminals

COLORSCHEME1: 1 3; meant for 256 color terminals

COLORSCHEME2: as COLORSCHEME0, meant for 88 color terminals

COLORSCHEME3: as COLORSCHEME0, meant to be a sane default, to be modified by the user.

DARK (true/false/auto)

The value of this variable determines whether darkmode is on/off for the color scheme selection in the COLORSCHEME? variables. For the value auto the result depends on a heuristic based on TERM_DARK and COLORFGBG_DARK, see below.

TERM_DARK (string list)

This is a list of pairs of the form regular-expresssion 1 dark-mode 1 regular-expresssion 2 dark-mode 2 ... where dark-mode is one of true, false, true*, false*; optionally, a default dark-mode can be specified as a last entry (if none is specified, the default is true*). If DARK=auto this is used to determine the darkmode as follows:

The first regular-expresssion matching TERM is considered, and the corresponding dark-mode describes what to do (if no regular expression matches then dark-mode is assumed to be true): The values true (or true*) and false (or false*) mean that the darkmode is on or off, respectively. However, for true* and false* the variable COLORFGBG is respected in addition: If COLORFGBG is nonempty then the darkmode is on or off, depending on whether COLORFGBG matches an expression from COLORFGBG_DARK. Note that COLORFGBG is an environment variable set by some terminals like rxvt or konsole which describes the background color.

COLORFGBG_DARK (string list)

This is a list of regular expressions. It is only used if DARK=auto, the matching dark-mode in DARK_TERM is true* or false*, and COLORFGBG is nonempty. In this case, the resulting darkmode is on or off, depending on whether COLORFGBG matches an element of this list. Note that COLORFGBG is an environment variable set by some terminals like rxvt or konsole which describes the background color.

LEVENSHTEIN_DISTANCE (integer)

Set default levenshtein-distance.

UPDATE_VERBOSE (true/false)

Whether eix-update -v is on by default (output of cache method per version).

EXCLUDE_OVERLAY (string list)

Set a list of wildcard patterns for overlay paths that are excluded from the index. See the eix-update option --exclude-overlay.

ADD_OVERLAY (string list)

Set a list of overlays that are added to the index. See the eix-update option --add-overlay.

EXPORT_PORTDIR_OVERLAY (true/false)

If true and overlays are excluded/added, a correspondingly modified PORTDIR_OVERLAY is exported. This means that in a sense also the corresponding eclasses of these overlay are excluded/added for cache methods eix and eix*.

CACHE_METHOD_PARSE (string)

This string is appended to all cache methods using parse/parse*/ebuild/ebuild*. Its default contains #metadata-md5#metadata-flat. Unless you have a very special setup this is always what you want: It means that if a current metadata (in a metadata/*cache subdirectory) is available for the ebuild, this is used instead of parsing/executing the ebuild.

The latter is in principle not completely reliable (parsing) or rather slow (executing), i.e. the metadata (if available and up-to-date) is always preferable. For more details see the section SPEEDUP.

PORTDIR_CACHE_METHOD, OVERLAY_CACHE_METHOD (string)

Set the type of the cache used by portage and for overlays. PORTDIR_CACHE_METHOD defaults to metadata-md5-or-flat, OVERLAY_CACHE_METHOD to parse|ebuild*.

For speed reasons it is preferable to use metadata also for overlays. More details can be found in the section SPEEDUP.

Security Warning: If you do not completely trust the .ebuilds in your overlays, you should set OVERLAY_CACHE_METHOD=parse.

You might want to set temporarily OVERLAY_CACHE_METHOD=eix*::~ - as will be explained later, eix will then take by default the overlay data from the previous eix database.

The available cache methods are described below. You might want to specify a different cache method only for some overlays. This can be done with the following variables:

CACHE_METHOD, OVERRIDE_CACHE_METHOD (string list)

These variables are string lists of the form "overlay method overlay method ...". The cache method of overlay is set to the subsequent method, thus overriding the default settings of OVERLAY_CACHE_METHOD (or of PORTDIR_CACHE_METHOD if overlay is the PORTDIR directory). overlay is interpreted as a wildcard pattern which should match the path (symbolic links resolved) of the overlay (it is not possible to refer to repository's name here - you must use the true path). Later entries override earlier ones: The last matching entry takes precedence.

The difference between CACHE_METHOD and OVERRIDE_CACHE_METHOD is that the former applies immediately while the latter can also be used to extend/override the changes made implicitly if KEEP_VIRTUALS is used (see below).

The default definitions of CACHE_METHOD and OVERRIDE_CACHE_METHOD contain %{ADD_CACHE_METHOD} and %{ADD_OVERRIDE_CACHE_METHOD}, respectively. According to the mechanism of delayed substitution explained in another section, this means that the variables ADD_CACHE_METHOD or ADD_OVERRIDE_CACHE_METHOD can also be used to override the cache method locally. If you modify CACHE_METHOD or OVERRIDE_CACHE_METHOD in /etc/eixrc, it is recommended to add " %{ADD_CACHE_METHOD}" or " %{ADD_OVERRIDE_CACHE_METHOD}" (note the space in front of %) at the end of the respective modified definitions, so that these variables can still be used for local overriding.

The following cache methods are available:

metadata-flat or metadata-flat:PATH

Use the metadata-cache located inside the portage-tree ($PORTDIR/metadata/cache).

: If you provide PATH, it overrides the above path; in this case, it must be the full path (i.e. no prefix is used). You might want to provide PATH if you use some package manager to generate the metadata in the corresponding directory.

metadata-md5 or metadata-md5:PATH

This is similar to metadata-flat with the difference that the files within ($PORTDIR/metadata/md5-cache) are used where an md5sum is used instead of the timestamp to check whether the metadata is up-to-date. This should be the preferred method for overlays if the overlay supports it, that is, if its metadata/layout.conf file contains the line cache-format=md5-dict. (Note that only portage reads metadata/layout.conf; eix does not.)

metadata-assign or metadata-assign:PATH

This is similar to metadata-flat with the difference that the files within the metadata cache are expected to be in an "assignment format" (TYPE=value) which is the case in some alt-gentoo trees.

metadata-md5-or-flat, metadata-md5-or-flat:PATH

This is similar to metadata-flat with the difference that it is first attempted to find each category in $PORTDIR/metadata/md5-cache. If PATH is specified, this method is equivalent to metadata-md5:PATH.

metadata-md5-or-assign, metadata-md5-or-assign:PATH

This is similar to metadata-assign with the difference that it is first attempted to find each category in $PORTDIR/metadata/md5-cache. If PATH is specified, this method is equivalent to metadata-md5:PATH.

sqlite

This is an extremely fast cache method if you are using portage with the sqlite backend, see http://wikigentoo.ksiezyc.pl/TIP_speed_up_portage_with_sqlite.htm or https://wiki.gentoo.org/wiki//etc/portage/modules (older links to this topic were http://gentoo-wiki.com/TIP_speed_up_portage_with_sqlite or http://gentoo-wiki.info/TIP_speed_up_portage_with_sqlite or http://en.gentoo-wiki.com/wiki/Portage_SQLite_Cache though apparently none of these do work anymore).

Note that in contrast to the default metadata cache method you must use emerge --metadata before you call eix-update with this method.

: Since the support of this cache method requires sqlite to be installed, this method is not necessarily compiled in. You must have emerged eix with the appropriate USE flag (or in a manual installation used ./configure --with-sqlite before compilation) if you want support for this method.
As for all other cache methods, only those categories enabled by profile/category (in the main tree or some overlay) are read. If you do not want this, use sqlite* (see below).

sqlite*

This is analogous to the cache method sqlite with the difference that all categories found in the file are added, even those categories which were not enabled by some profile/categories file.

flat or flat:PATH

This is similar to metadata-flat with the difference that the metadata is expected in the directory PATH$PORTAGE_OR_OVERLAY_DIR. If PATH is omitted, it defaults to /var/cache/edb/dep.

: You can use this cache method with <portage-2.1 and the default backend.

assign or assign:PATH

This is analogous to flat with the difference that the files are expected to be in an "assignment format" (TYPE=value). This is the case if you use portage-2.1 with the default backend.

: If you are using >=portage-2.1 and the default backend, you might want to use this one if you do not have access to the portage tree when you run eix-update. Note that in contrast to the default metadata-* cache methods you must run emerge --metadata before you call eix-update with this method. You will probably want to use a corresponding option in eix-sync in this case.

repo-flat or repo-flat:PATH or repo-assign or repo-assign:PATH

This is analogous to flat/assign with the difference that the metadata is expected in the directory PATH/$repo_name. If $repo_name is empty, the name x-XXX is assumed where XXX is the last nonzero path component of the portage/overlay directory. This corresponds to the naming scheme of paludis. If this gives a wrong path for some overlay, you can still manually override this with e.g. OVERRIDE_CACHE_METHOD='bad_overlay metadata-assign:correct_path'.

parse[#metadata-method]...

Get the information from the ebuilds, parsing it using some heuristics. Hence, this method has no security risk but possibly some other problems. For example, if variables are only set in eclasses, this method will not see them. Examples of problems with this method is missing SLOT information for typical ebuilds from kde-base or stupid version numbers for gcc cross-compilers. This is the cache-method none from older eix versions (before 0.11.1).

It is optionally possible to append one or several strings of the form #metadata-method where metadata-method is any of the above mentioned cache methods (excluding sqlite). In this case, the metadata-methods are used to check whether they contain newer information than the ebuild. If this is the case, the metadata is used instead of the ebuild (the first matching metadata wins).

Usually this is what you want, especially for overlays, since the metadata is more reliable than the results of cache method parse. Of course, this is only useful if the overlay foo contains metadata which is regularly updated by the overlay maintainer using

egencache --repo=foo --update

(whether this is done for layman overlays depends on the overlay maintainer; for your local overlays you can of course use the above command manually).

Since this is usually what you want, the string in CACHE_METHOD_PARSE is appended by default to the cache method parse.

Of course, if you know in advance that the metadata information of the overlay is up-to-date, it is (slightly) faster to use directly to use the corresponding metadata method (usually metadata-flat). The latter makes sense if you e.g. call egencache from a script which you use to sync the overlay (e.g. in eix-sync).

parse*[#metadata-method]...

This is essentially the same as cache method parse with the difference that variables are not expanded in variable definitions. This is the cache-method none* from older eix versions (before 0.11.1) and cache-method none from very old eix versions (before 0.7.1)

ebuild[#metadata-method]...

If no portage cache is available (e.g. for overlays) this is the most compatible but also the slowest method. The information is obtained via "/usr/bin/ebuild ... depend" from the ebuild. Since all ebuilds will get executed by bash, this may be a security risk if you do not trust all ".ebuild" scripts or your environment variables. Intentionally, the environment is not cleared before the actual execution so that you can pass further variables to the ebuild. However, this can also lead to unexpected behaviour or even a security risk since many bash scripts may be tricked with strange environments. Use env -i eix-update when this causes problems.

: Do not use this method if you do not completely trust all .ebuilds for which the method applies!
Concerning the optional appendices #metadata-method, see the description of the cache method parse. Note that if corresponding metadata is available this will be essentially faster than executing the ebuild.

ebuild*[#metadata-method]...

This is a slightly faster and slightly less compatible version of ebuild: The information is obtained via the undocumented "/usr/lib/portage/ebuild.sh". Thus, instead of executing a python program for each ".ebuild" as for cache-method ebuild, "only" a lengthy shell-script and the ebuild itself is executed (hence, also this method is unsafe if you do not trust all ".ebuild" scripts). Most environment variables except for portage variables and PATH are cleared; PORTAGE_ROOTPATH is exported; some .ebuild-specific variables like $P are set when the ebuild is executed. This method is not quite as compatible as the method ebuild, and its success may depend more on the portage version. However, this method is considerably faster than ebuild and stable enough to treat e.g. typical ebuilds from kde-base.

: Do not use this method if you do not completely trust all .ebuilds for which the method applies!

parse|ebuild, parse*|ebuild, parse|ebuild*, parse*|ebuild* [#metadata-method]...

This is a mixture of parse/parse* and ebuild/ebuild*. Each ebuild is first scanned as with method parse/parse*. If the obtained result has missing information or appears strange, the ebuild is treated as with cache method ebuild/ebuild*. As a rule of thumb, this method is much faster than ebuild/ebuild* but still much slower than parse/parse*. It has the same security risks as ebuild/ebuild*, of course.

: Do not use this method if you do not completely trust all .ebuilds for which the method applies!

eix or eix:FILE or eix:FILE:overlay

Use the cachefile FILE previously generated by eix-update. If omitted or empty, FILE defaults to /var/cache/eix/portage.eix.

As for all other cache methods, only those categories enabled by profile/category (in the main tree or some overlay) are read. If you do not want this, use eix* (see below).

If overlay is not given or empty, then only the "main" tree in FILE is read - overlays within FILE are ignored. Otherwise only the part corresponding to overlay is read from FILE. Here, "corresponding" means the first overlay from FILE matching the wildcard pattern overlay is used. "Matching" means that first the label is tested, then the path and finally also the number of the overlay within FILE. Note that overlay has in general no relation with the current overlay names or order - only the names/order stored in FILE play a role here.

There are two exceptional values for overlay which are treated by different rules:

If overlay has the special value "~", then the name of the current overlay label is used implicitly as the overlay argument; If the current overlay label is empty or does not match, then the current overlay path is used instead.

If overlay has the special value "*", then all overlays in FILE are read. Note this is usually not what you want since it means that if FILE originally contained several overlays, this overlay structure will appear "flattened".

eix* or eix*:FILE or eix*:FILE:overlay

This is analogous to the cache method eix with the difference that all categories found in FILE are added, even those categories which were not enabled by some profile/categories file.

This cache method is useful if FILE contains information for some overlay directory for which the corresponding profile/categories on the local machine is unknown or not necessarily up-to-date.

This is used for eix-remote.

Note that in particular with PORTDIR_CACHE_METHOD=eix*::~, the overlay data is by default just "copied" from the previous eix cachefile.

KEEP_VIRTUALS (true/false)

If true, eix-update will keep all virtual overlays from the previous database if that existed. This has the same effect as appending for each virtual overlay of the previous database the entry "overlay-name" to ADD_OVERLAY and appending a corresponding entry "overlay eix*::overlay" to CACHE_METHOD. Note that this means that this option might override settings made in CACHE_METHOD, but it might be overridden by settings from OVERRIDE_CACHE_METHOD.

REPO_NAMES

This variable is a string list of the form "dir-pattern overlay-label dir-pattern overlay-label ...". When a new cachefile is created, the overlay matching dir-pattern obtains the label overlay-label, independent of the content of its profiles/repo_name file. This variable can also associate label names to virtual overlays which do not possess such a file. In particular, this variable also overrides overlay labels set by KEEP_VIRTUALS. Later entries override earlier ones: The last matching entry takes precedence.

LOCAL_PORTAGE_CONFIG (true/false)

If false, /etc/portage and ACCEPT_KEYWORDS (from make.conf or the environment) are ignored. Since eix-0.7.9, it is recommended to leave this value "true", because setting it to "false" will just hide some informations.

ALWAYS_ACCEPT_KEYWORDS (true/false)

If true, ACCEPT_KEYWORDS is used even without LOCAL_PORTAGE_CONFIG, e.g. to determine the `default' stability.

UPGRADE_LOCAL_MODE (+ or local/- or non-local/anything else)

If this variable is + / -, the --upgrade option of eix will always match as if LOCAL_PORTAGE_CONFIG was set to true / false.

RECOMMEND_LOCAL_MODE (+ or local/- or non-local/anything else)

If this variable is + / - the upgrade/downgrade recommendations as well as in eix-diff the tests for version changes will act as is LOCAL_PORTAGE_CONFIG was set to true / false.

UPGRADE_TO_HIGHEST_SLOT (true/false)

If true, all upgrade tests will give a positive result for an installed package for which not the slot with the best stable version is installed. Exceptions to this general policy can be specified in /etc/portage/package.slot_upgrade_forbid or /etc/portage/package.slot_upgrade_allow, respectively.

RECURSIVE_SETS (true/false)

If true, then sets and packages which are contained in an included set are considered as part of the parent set.

XML_KEYWORDS(full/effective/both/true/full*/effective*/none/false)

With --xml, this variable decides whether full/effective (or both) types of KEYWORDS are printed for each versions. Here, "full" is the KEYWORDS string as specified in the ebuild and "effective" means its modification by the profile. The values full*/effective* are similar to full/effective, but both types are printed if their values differ. true/false are equivalent to full*/none.

XML_OVERLAY (true/false)

With --xml, this variable decides whether the overlay (i.e. its path) is output for each version. This has no influence for versions from overlays without label (repository name): For those versions the overlay is output unconditionally.

SORT_INST_USE_ALPHA (true/false)

If true, print the useflags of installed packages in alphabetical order. Otherwise, first those useflags are printed (in alphabetical order) which were set when the package was emerged, then the others are printed (in alphabetical order).

CHECK_INSTALLED_OVERLAYS (true/false/repository)

If true, always check from which overlay a package was installed. If false, only packages with versions in at least two trees are checked, i.e. only packages for which it appears reasonable from the database that it might have been installed from a different overlay. However, this information might be false if such a package was removed from an overlay or if a whole overlay is not in the database anymore.

The special value repository is a reasonable compromise: If repository data was stored during emerge (this is the case only with current portage versions; you can use eix-installed [no-]repository to check for which versions this is (not) the case) then this repository data is always used. Only if it is unreadable or does not match, the behaviour for that version is the same as in case CHECK_INSTALLED_OVERLAYS=false.

Especially in connection with option -T (if NONEXISTENT_IF_OTHER_OVERLAY is true) and with option -J the speed increase is enormously if you set this variable to false or repository, but you should be aware that the information used about the installed overlay is not completely reliable (for versions installed with old portage versions). In particular, the option -T will not detect if an installed version of a package actually stems from a redundant overlay if in the current database all versions of this package stem from one (other) location.

PRINT_COUNT_ALWAYS (true/false/never)

If true, always print the number of matches in the last line, even if this number is 0 or 1. If PRINT_COUNT_ALWAYS=never, then this last line is omitted completely. Both is normally not useful but might simplify writing certain scripts parsing the output of eix.

COUNT_ONLY_PRINTED (true/false)

If false, print only the number of matches, independently of whether the matches actually lead to some output. This might be useful for certain scripts if you are only interested in the number of matches and use e.g. FORMAT='' to speed things up.

DEFAULT_MATCH_FIELD (string list) This is a list of strings of the form regular_expression[\n\r\t ]match_field which is used to determine the default match field. The search pattern from the command line is matched against all the regular_expression values in this list in the given order. For the first match, the corresponding match_field value is used as the default match field. You can specify a last match_field (without a regular_expression) in this list which is used as the default fallback if all matches failed; if there is no such entry, then name is assumed. It may be convenient to use delayed substitution ${\VAR} for regular_expression to avoid manually inserting additional escapes.

The possible values for match_field are name, category, category/name (or category-name), description, license, homepage, set, eapi, installed-eapi, slot, installed-slot, use (or iuse), with-use (or installed-with-use), without-use (or installed-without-use), src-uri (or srcuri), deps, depend, rdepend, pdepend, bdepend, or error, corresponding to the analogous command line option for the match field. The special value error means that eix stops with an error message claiming that a match field is not autodetected and must be specified explicitly.

For testing scripts, it is recommended to use DEFAULT_MATCH_FIELD=error so that scripts do not rely on particular defaults of that variable: This default has already changed several times in the history of eix and probably will also eventually change in the future.

DEFAULT_MATCH_ALGORITHM (string list)

This is a list of strings of the form (match_field_specification)regular_expression[\n\r\t ]match_algorithm which is used to determine the default match algorithm.

The interpretation is essentially analogous to DEFAULT_MATCH_FIELD with the main difference that match_algorithm specifies the default match algorithm chosen. The possible values for match_algorithm are regex, pattern, substring, begin, end, exact, fuzzy, or error which correspond to the analogous command line option for the match algorithm. The special value error means that eix stops with an error message claiming that a match algorithm is not autodetected and must be specified explicitly. If no other default match algorithm default is specified, then regex is used.

In each string one of the two parts (match_field_specification) and regular_expression can be omitted. If neither is omitted, they must both match simultaneously for the algorithm to be selected. The match_field_specification refers to the effectively selected match field(s), according to the following rules.

match_field_specification is a concatenation of words of the form |match_field, &match_field, and !match_field, where match_field can have the same values as in DEFAULT_MATCH_FIELD (except for error). The order of these words plays no role.

eix combines all match_field values with the same leading symbol (|, &, or !) and thus obtains three (possibly empty) families of match fields. Now match_field_specification matches if all of the following holds:

1. If the first family (|) is nonempty, at least one match field of that family is effectively selected (think of a logical "or").

2. At least all match fields of the second family (&) are effectively selected (think of a logical "and").

3. If the third family (!) is nonempty, at most match fields from that family are selected (think of a logical "not (... or ... or ...)").

Thus, for instance, to specify that exactly all of depend, rdepend, pdepend, bdepend are selected (i.e. --deps) and no other field is selected, you can use either of

(&deps!deps)

(&depend&rdepend&pdepend&bdepend!depend!rdepend!pdepend!bdepend)

On the other hand, if you want to specify that at least one of depend, rdepend, pdepend, bdepend are selected and no other than these fields are selected, you can use either of

(|deps!deps)

(|depend|rdepend|pdepend|bdepend!depend!rdepend!pdepend!bdepend)

For testing scripts, it is recommended to use DEFAULT_MATCH_ALGORIRTHM=error so that scripts do not rely on particular defaults of that variable: This default has already changed several times in the history of eix and probably will also eventually change in the future.

TEST_FOR_EMPTY (true/false) Defines whether empty entries in /etc/portage/package.* are shown with -t.

TEST_KEYWORDS (true/false)

Defines whether /etc/portage/package.{accept_,}keywords is tested with -t.

TEST_MASK (true/false)

Defines whether /etc/portage/package.mask is tested with -t.

TEST_UNMASK (true/false)

Defines whether /etc/portage/package.unmask is tested with -t.

TEST_USE (true/false)

Defines whether /etc/portage/package.use is tested with -t.

TEST_ENV (true/false)

Defines whether /etc/portage/package.env is tested with -t.

TEST_LICENSE (true/false)

Defines whether /etc/portage/package.license is tested with -t.

TEST_RESTRICT (true/false)

Defines whether /etc/portage/package.accept_restrict is tested with -t.

TEST_CFLAGS (true/false)

Defines whether /etc/portage/package.cflags is tested with -t.

TEST_REMOVED (true/false)

Defines whether removed packages are tested with -t.

TEST_FOR_NONEXISTENT (true/false)

Defines whether non-existent installed versions are positive for -T. What is considered as non-existent is defined by the NONEXISTENT_IF-variables.

TEST_FOR_REDUNDANCY (true/false)

Defines whether redundant entries in /etc/portage/package.* are positive for -T. What is considered as redundant is defined by the REDUNDANT_IF-variables.

ACCEPT_KEYWORDS_AS_ARCH (full/true/false)

If full or true modify ARCH by ACCEPT_KEYWORDS. This determines which keywords are considered as ARCH or OTHERARCH. The value full also influences the original ARCH keywording.

NONEXISTENT_IF_OTHER_OVERLAY (true/false)

Defines whether versions are non-existent for TEST_FOR_NONEXISTENT if they come from a different overlay than the installed version.

NONEXISTENT_IF_MASKED (true/false)

Defines whether masked versions are non-existent for TEST_FOR_NONEXISTENT.

REDUNDANT_IF_DOUBLE (string)

Applies if /etc/portage/package.{accept_,}keywords lists the same keyword twice for some/all (un-/installed) versions.

string describes which versions should be tested. It can have the following values:

no or false: Do not test for this type of redundancy.
some: It suffices that the redundancy occurs for some version in the database.
all: The redundancy must occur for all versions in the database.
some-installed: It suffices that the redundancy occurs for some installed version. Uninstalled versions are ignored for this test.
all-installed: The redundancy must occurs at least for all installed versions of the package. If no version is installed, it must occur at least once.
some-uninstalled: It suffices that the redundancy occurs for some uninstalled version. Installed versions are ignored for this test.
all-uninstalled: The redundancy must occurs at least for all uninstalled versions. If all versions in the database are installed, it must occur at least once.
-some of the above or +some of the above: The test only applies if in addition no version (in case -) resp. at least some version (in case +) of the package is installed.
some of the above or some of the above: The result is positive if at least one of the two tests is positive. Instead of "or" also the symbols "|" or "||" can be used.

REDUNDANT_IF_DOUBLE_LINE (string, see above)

Applies if /etc/portage/package.{accept_,}keywords has two lines for identical targets, i.e. such that portage would drop the first of these lines. Note that lines with targets foo/bar and =foo/bar-1 are considered as different in this context by portage (and thus also by eix) even if foo/bar would apply to version 1. The latter redundancy can be found implicitly with REDUNDANT_IF_DOUBLE_LINE, REDUNDANT_IF_MIXED, and REDUNDANT_IF_STRANGE.

REDUNDANT_IF_MIXED (string, see above)

Applies if /etc/portage/package.{accept_,}keywords lists two different keywords, e.g. ~ARCH and *, for the versions in question.

REDUNDANT_IF_WEAKER (string, see above)

Applies if /etc/portage/package.{accept_,}keywords lists a keywords which can be replaced by a weaker keyword, e.g. ** or ~OTHERARCH or OTHERARCH in place of ~ARCH, or ~OTHERARCH in place of OTHERARCH, for the versions in question.

REDUNDANT_IF_STRANGE (string, see above)

Applies if /etc/portage/package.{accept_,}keywords lists a strange keyword, e.g. UNKNOWNARCH (unknown to the .ebuild and ARCH) or -OTHERARCH, for the versions in question.

REDUNDANT_IF_NO_CHANGE (string, see above)

Applies if /etc/portage/package.{accept_,}keywords provides keywords which do not change the availability keywords status for the versions in question.

REDUNDANT_IF_MASK_NO_CHANGE (string, see above)

Applies if /etc/portage/package.mask contains entries which do not change the mask status for the versions in question.

REDUNDANT_IF_UNMASK_NO_CHANGE (string, see above)

Applies if /etc/portage/package.unmask contains entries which do not change the mask status for the versions in question.

REDUNDANT_IF_DOUBLE_MASKED (string, see above)

Applies if /etc/portage/package.mask matches twice for the versions in question.

REDUNDANT_IF_DOUBLE_UNMASKED (string, see above)

Applies if /etc/portage/package.unmask matches twice for the versions in question.

REDUNDANT_IF_DOUBLE_USE (string, see above)

Applies if /etc/portage/package.use matches twice for the versions in question.

REDUNDANT_IF_DOUBLE_ENV (string, see above)

Applies if /etc/portage/package.env matches twice for the versions in question.

REDUNDANT_IF_DOUBLE_LICENSE (string, see above)

Applies if /etc/portage/package.license matches twice for the versions in question.

REDUNDANT_IF_DOUBLE_RESTRICT (string, see above)

Applies if /etc/portage/package.accept_restrict matches twice for the versions in question.

REDUNDANT_IF_DOUBLE_CFLAGS (string, see above)

Applies if /etc/portage/package.cflags matches twice for the versions in question. Note that this file is not supported by portage, but you might e.g. have built some support for it in your personal /etc/portage/bashrc file. Of course, this means that also no format for /etc/portage/package.cflags is defined. eix assumes that the format is analogous to /etc/portage/package.{keywords,use} (i.e. an entry is at most one line, with the matching version(s) at the beginning). As the other /etc/portage/package.* files, /etc/portage/package.cflags may also be a directory tree; in this case, all non-hidden files/subdirectories in this tree are read recursively, resolving all symbolic links.

REDUNDANT_IF_IN_KEYWORDS (string, see above)

Applies if /etc/portage/package.{accept_,}keywords contains a nonempty entry matching the versions in question (to find empty entries use -t). Of course, one will certainly not consider all matches as a redundancy (although one might misuse this option to simply list all matches). However, one might consider matching but non-installed packages as redundant. Hence, typically one might want to set this variable to the value -some or the equivalent value -some-uninstalled (or to false if one thinks that entries for uninstalled packages are "normal" and not redundant).

REDUNDANT_IF_IN_MASK (string, see above)

This is analogous to REDUNDANT_IF_IN_KEYWORDS, but for /etc/portage/package.mask.

REDUNDANT_IF_IN_UNMASK (string, see above)

This is analogous to REDUNDANT_IF_IN_KEYWORDS, but for /etc/portage/package.unmask.

REDUNDANT_IF_IN_USE (string, see above)

This is analogous to REDUNDANT_IF_IN_KEYWORDS, but for /etc/portage/package.use.

REDUNDANT_IF_IN_ENV (string, see above)

This is analogous to REDUNDANT_IF_IN_KEYWORDS, but for /etc/portage/package.env.

REDUNDANT_IF_IN_LICENSE (string, see above)

This is analogous to REDUNDANT_IF_IN_KEYWORDS, but for /etc/portage/package.license.

REDUNDANT_IF_IN_RESTRICT (string, see above)

This is analogous to REDUNDANT_IF_IN_KEYWORDS, but for /etc/portage/package.accept_restrict.

REDUNDANT_IF_IN_CFLAGS (string, see above)

This is analogous to REDUNDANT_IF_IN_KEYWORDS, but for /etc/portage/package.cflags. See the above comments about this file.

SLOT_UPGRADE_FORBID (string list)

This is a list of filenames/dirnames which serve as /etc/portage/package.slot_upgrade_forbid

SLOT_UPGRADE_ALLOW (string list)

This is a list of filenames/dirnames which serve as /etc/portage/package.slot_upgrade_allow

KEYWORDS_NONEXISTENT (string list)

This is a list of filenames/dirnames which serve as /etc/portage/package.{accept_,}keywords.nonexistent

MASK_NONEXISTENT (string list)

This is a list of filenames/dirnames which serve as /etc/portage/package.mask.nonexistent

UNMASK_NONEXISTENT (string list)

This is a list of filenames/dirnames which serve as /etc/portage/package.unmask.nonexistent

USE_NONEXISTENT (string list)

This is a list of filenames/dirnames which serve as /etc/portage/package.use.nonexistent

ENV_NONEXISTENT (string list)

This is a list of filenames/dirnames which serve as /etc/portage/package.env.nonexistent

LICENSE_NONEXISTENT (string list)

This is a list of filenames/dirnames which serve as /etc/portage/package.license.nonexistent

RESTRICT_NONEXISTENT (string list)

This is a list of filenames/dirnames which serve as /etc/portage/package.accept_restrict.nonexistent

CFLAGS_NONEXISTENT (string list)

This is a list of filenames/dirnames which serve as /etc/portage/package.cflags.nonexistent

INSTALLED_NONEXISTENT (string list)

This is a list of filenames/dirnames which serve as /etc/portage/package.installed.nonexistent

PACKAGE_NOWARN (string list)

This is a list of filenames/dirnames which serves as /etc/portage/package.nowarn

/etc/portage/sets.eix

This is a directory analogous to /etc/portage/sets (see the portage manpage). Since portage has some ways to define package sets which are not available for eix, you can use this directory to store (static) sets which you want that eix knows anyway (e.g. so that set entries in /etc/portage/package.{accept_,}keywords can be treated properly).

/etc/portage/package.slot_upgrade_forbid

/etc/portage/package.slot_upgrade_allow

Similarly as all other /etc/portage/package.*, this can be a file or directory. The entries of this file are of the form "category/name" (separated by newlines). The corresponding packages are treated as exceptions for UPGRADE_TO_HIGHEST_SLOT.

/etc/portage/package.accept_keywords.nonexistent

/etc/portage/package.keywords.nonexistent

/etc/portage/package.mask.nonexistent

/etc/portage/package.unmask.nonexistent

/etc/portage/package.use.nonexistent

/etc/portage/package.env.nonexistent

/etc/portage/package.license.nonexistent

/etc/portage/package.accept_restrict.nonexistent

/etc/portage/package.cflags.nonexistent

Similarly as /etc/portage/package.*, this can be a file or a directory. If an entry (separated by space or newline) matches the first word of a line in the corresponding /etc/portage/package.* file, this line is excluded from the -t tests (for names not in the database). You can use this to eliminate certain warning from -t.

/etc/portage/package.installed.nonexistent

This is similar to the other /etc/portage/package.*.nonexistent files/dirs with the difference that it eliminates messages from -t about installed packages which had been removed from the database. The entries of this file are of the form "category/name", but you can also omit the "category/" part (although this is not recommended).

/etc/portage/package.nowarn

Similarly as /etc/portage/package.*, this can be a file or a directory. With this file/dir you can switch off test for -T for particular packages. The format of the file is similarly to /etc/portage/package.use with the difference that you can switch on/off tests. Exactly those lines apply for which at least one matching version is available. For example, the lines

sys-kernel/*-sources no_change weaker

>sys-kernel/hardened-sources-2.6.40 -weaker

in this file will cause that -T does not find the package sys-kernel/*-sources if the only cause for it would be that REDUNDANT_IF_NO_CHANGE or REDUNDANT_IF_WEAKER is set. An exception to this rule is only made for REDUNDANT_IF_WEAKER and for hardened-sources, if the latter is available at least in version 2.6.40. The order in the file plays no role: The "-" always takes precedence if it occurs somewhere.

You can list a package several times in this file; the listed tests are then cumulative for the corresponding package.

Available tests are in_keywords, no_change, double, mixed, weaker, double_line, in_mask, mask_no_change, double_masked, in_unmask, unmask_no_change, double_unmasked, in_use, double_use, in_env, double_env, in_license, double_license, in_restrict, double_restrict, in_cflags, double_cflags, the meaning corresponding to the according REDUNDNANT_IF_* variable.

In addition there are the tests nonexistent, masked, other_overlay which correspond to the respective variables TEST_FOR_NONEXISTENT, NONEXISTENT_IF_MASKED, NONEXISTENT_IF_OTHER_OVERLAY.

/var/cache/eix/portage.eix

This is the binary database for eix. The path can be changed with the EIX_CACHEFILE variable (which by default honours EPREFIX via delayed reference).

/var/cache/eix/previous.eix

This is the previous version of /var/cache/eix/portage.eix, used by eix-diff and eix-sync. The path can be changed with the EIX_PREVIOUS variable (which by default honours EPREFIX via delayed reference).

/var/cache/eix/remote.tar.bz2 /var/cache/eix/remote2.tar.bz2

This is a local copy of the remote archive, used by eix-remote. The path can be changed with the EIX_REMOTEARCHIVE1 or EIX_REMOTEARCHIVE1 variable, respectively (which by default honour EPREFIX via delayed reference).

masked-packages

masked-packages is a helper tool for scripts which can match the arguments against a list of masked packages or versions. The masks are specified by the options and expected to be in the same format as in /etc/portage/package.mask The arguments must be in the form category/name-version[:slot][::repo]. By default, the arguments matching a mask are printed.

Examples:

masked-packages -q --file /etc/portage/package.accept_keywords app-portage/eix-99999999::mv: Returns successfully if an entry from /etc/portage/package.accept_keywords matches for the version app-portage/eix-99999999::mv.
masked-packages -m '=a/b-1*:1' -m '=c/d-1' a/b-0:1 a/b-1.1:1 a/b-1.2 c/d-1:2: Outputs only a/b-1.1:1 and c/d-1:2 since the other arguments do not match in version or slot, respectively.

Options

-h, --help: Print a help screen and exit.
-q, --quiet (toggle): Do not print the arguments matching a mask, but instead show by the exit status whether an argument was matching. More precisely, the exit status is only successful if at least one argument is matching.
-Q, --nowarn (toggle): Do not print warnings concerning bad syntax.
-m, --mask MASK: Add MASK to the list of masks.
-f, --file FILE: Add the lines of FILE to the list of masks. FILE can also be empty, - or a directory: An empty filename or - means that standard input is used; a directory is read recursively.
-F, --read-file FILE: Add words from FILE to the list of arguments. FILE can also be empty, - or a directory: An empty filename or - means that standard input is used; a directory is read recursively.

versionsort

versionsort is a helper tool for scripts which serves two purposes. It cuts the version strings and certain non-alphanumeric garbage from its arguments and interprets the arguments themselves as version strings (depending on some heuristics). Then it outputs the version strings in a sorted order, according to the portage rules of version sorting. If there is more than one argument, each version (including the last one) is followed by a newline. For example,

: versionsort '>=gcc-4.4' 4.4_alpha0 '<sys-devel/gcc-4.05' 4.5

will output

4.05

4.4_alpha0

4.4

4.5

If you pass only one argument, versionsort is more sloppy about the version rules; even if the version part is not completely correct, it is guaranteed in this case that the output is string-equal to the version part. Thus, you can use versionsort with one argument to split the package name from the version part in a shell script by

: split=1-font-adobe-75dpi-1.3-r1
version=`versionsort "X$split"`; name=${split%"-$version"}

Although currently it makes no difference, it is safer in such a case (concerning possible future extensions of the version format) to let the argument(s) start with a non-number (like X in the above example) to make sure that versionsort will really cut the version from the argument and cannot misinterpret the whole argument as a version.

Since eix-0.25.6, versionsort supports some options: With -n, -p, -f, -v, -r, -V only the name (without version appendix), name with version (without revision appendix), name with version including revision appendix, the pure version (without revision appendix), the revision, or version including appendix corresponding to the argument will be output, respectively. (Since eix-0.29.5 an arbitrary number of arguments is admissible after these options; if more than one argument is specified, on each output a newline is appended.) For example, after

split=1-font-adobe-75dpi-1.3-r1

PN=`versionsort -n "$split"`

P=`versionsort -p "$split"`

PF=`versionsort -f "$split"`

PV=`versionsort -v "X$split"`

PR=`versionsort -r "X$split"`

PVR=`versionsort -V "X$split"`

the variables PN, P, PF, PV, PR, and PVR have an analogous meaning as in ebuilds, namely 1-font-adobe-75dpi, 1-font-adobe-75dpi-1.3, 1-font-adobe-75dpi-1.3-r1, 1.3, r1, or 1.3-r1, respectively. (if -r1 would not have been specified, PR would be empty: This differs from ebuilds).

Be aware that versionsort expects only for the options -n, p, and -f that the argument contains a package name: For all other options (or without option), it is made clear by prepending of "X" that the argument is not a "pure" version number.

BUGS (and sort of FAQ)

For bugreports use either https://github.com/vaeth/eix/issues/ or Gentoo's bugzilla https://bugs.gentoo.org/

Many cache methods are slowly in principle: Please use the hints given in the separate section SPEEDUP below.

eix cannot reliably detect the color capabilities and background color of your terminal. Here are a few simple methods how you can avoid some undesired color problems (to understand details of these methods look up the above description of the variables TERM_ALT?, SOLARIZED, COLORSCHEME?, DARK, TERM_DARK, and COLORFGBG_DARK.)

1. Use the color scheme corresponding to your actual background color by setting DARK=true or DARK=false in /etc/eixrc (or adapt the heuristics in TERM_DARK to your system.)
2. Force the desired background color (or avoid to set it) by setting BG0=black, BG1=black, BG2=white, BG3=white (or BG0=none, BG1=none, BG2=none, BG3=none) in /etc/eixrc. Note that forcing of the background color usually makes transparent terminals non-transparent and, moreover, can cause on some terminals some new scrolled-in lines to be in this background color. In order to (not) reset the forced background color before every newline you can set RESET_ALL_LINES=false or RESET_ALL_LINES=true, respectively (the default can depend on the eix version).
3. Force a desired color scheme on all terminals by setting TERM_ALT3=. in /etc/eixrc; you may want to combine this with setting COLORSCHEME3=0 (or =1, ..., =5). Note that the color schemes selected by the numbers 0 and 2 are very poor since they use only the few system colors and thus different things cannot always be distinguished by different colors. However, this can make sense e.g. if you frequently use different terminals and want to get used to only one scheme or if you want to force Ethan Schoonover's original solarized colorscheme. However, solarized users should in any case set SOLARIZED and use colorscheme 5 (or 4):
4. If you have configured your terminals to use Ethan Schoonover's Solarized colorscheme (light or dark) just set SOLARIZED=true (or light or dark - all is equivalent concerning eix). Only use the previous hint additionally if you do not like that there are additional colors used in 256 color capable terminals.
5. If you use rxvt which can do 256 colors but which does not set TERM=rxvt-256color or TERM=rxvt-unicode-256color, put TERM_ALT1_ADD=rxvt to /etc/eixrc.

eix does not and probably never will support dependencies and/or useflags. In particular, this means that eix -u output will be in general different from the output of an emerge update command. You should rely only on the latter for your system. This holds in particular also for the upgrades of packages with slots. The variable UPGRADE_TO_HIGHEST_SLOT and manual exceptions in /etc/portage/package.slot_upgrade_forbid or /etc/portage/package.slot_upgrade_allow, respectively, can be used to manually work around some of these shortcomings somewhat.

eix does not and never will fully support all sets which portage does support. Currently, it appears that even the proposed way of PROPERTIES=set to put packages in the tree will never be supported by eix (because eix would need full support for dependencies and useflags to handle these). As a workaround you can manually define such additional sets in /etc/portage/sets.eix. Moreover, eix does not and probably never will support reading of sets.conf files. If you specified additional sets/ directories e.g. in some overlay, you must add these additional directories manually to the EIX_LOCAL_SETS variable in /etc/eixrc. The easiest way to do the latter is to put an entry like

EIX_LOCAL_SETS_ADD="/path/to/overlay1/sets /path/to/overlay2/sets ..."

into /etc/eixrc (see the description of EIX_LOCAL_SETS above).

eix-diff does never consider /etc/portage/profile. (Reason: The saved database contains only the masking state according to the original profile, but not the profile itself. On the other hand, /etc/portage/profile can only be interpreted when the profile is known.)

The output with the default OVERLAYS_LIST=all-used-renumbered is confusing when one wants to use the overlay number in some eix variable/command-argument.

There is no cache method setting which gets information from overlays (for which no portage cache metadata is available) fast and reliable - you must always choose between one of these two extremes. The default is the fast one, but it shows often false slots and has other problems.

All the EPREFIX/ROOT stuff is confusing. In particular, by the mere fact of allowing much of these variables, eix will always be vulnerable to local attacks if it is called with a possibly unsafe environment.

The previous default KEEP_VIRTUALS=true used to confuse people. However, with the new default, nobody will find out that this feature exists. :(

There are too many features: The documentation and configuration has become too complicated. On the other hand, there are still many things which cannot be configured...

SPEEDUP

All non-metadata cache methods for eix-update are either non-reliable (parse, parse*) or rather slow and insecure (ebuild, ebuild*). For this reason, it is recommended to generate and use metadata for the main portage tree as well as for all its overlays. The defaults of eix are such that this metadata is used if available (see CACHE_METHOD_PARSE) (configuration is only necessary if you use the sqlite backend of portage). Essentially, there are two types of possible metadata which can be used:

1. Metadata stored in each tree/overlay.

This metadata is in the metadata/cache or metadata/md5-cache subdirectory of $PORTDIR or of the overlay's directory.

2. Metadata stored by portage for each tree/overlay in /var/cache/edb/

This metadata is updated with emerge --metadata (and its format depends on whether portage uses the sqlite backend).

The disadvantage of using metadata is that it has to be generated/updated before calling eix-update if the corresponding tree/overlay is updated and, in case of metadata in /var/cache/edb, that it takes additional space.

Fortunately, you do not have to care about metadata in the main tree, since the metadata/{md5-,}cache subdirectory of $PORTDIR is automatically updated with emerge --sync. However, your local overlays and several overlays updated by layman (or maybe in a different way) do not contain metadata (and even if they do, this metadata is not always up-to-date), and thus metadata for these overlays should be generated to speed up eix-update.

Be aware that generating metadata is a security risk, since all ebuilds of the tree are executed when doing so! However, you must be trusting the overlays anyway if you use them...

I do not recommend to use emerge --metadata (although this could be automatically called at the correct time by using eix-sync with the -M option: put e.g. the line -M into /etc/eix-sync.conf), because it would be a waste of disk space to store the metadata of the whole portage tree in duplicate into /var/cache/edb.

Instead, I do recommend to update the metadata in the overlays at each eix-sync. This can also be automatically updated at the correct time, but it requires a more complicated setup:

For a local overlay, for simplicity assume it is in /usr/local/portage (and that this path is contained in PORTDIR_OVERLAY), the procedure is as follows:

First you must give your overlay a name if you have not already done so: Put into the file /usr/local/portage/profiles/repo_name (creating it if necessary) the name of your overlay. (This step should always be done for overlays, independent of eix or metadata). I assume in the following that this name is my_local_overlay.

Second, you should specify which type of metadata you want: Put into the file /usr/local/portage/metadata/layout.conf (creating it if necessary) the line

cache-formats = md5-dict

and, unless you have a reason not to do so, also the line

thin-manifests = true

The former tells portage to create/read only the metadata in /usr/local/portage/metadata/md5-cache (which is the new method and should be preferred over the other). The other line is not really related with metadata but just means that the Manifest files in your overlay will/need not contain checksums of files from /usr/local/portage.

Now, whenever you want, the metadata can be updated by calling

egencache --repo=my_local_overlay --update

or (unless the overlay provides an up-to-date profile/use.desc)

egencache --repo=my_local_overlay --update --update-use-local-desc

Note that if the overlay uses eclasses from the main tree, the above command should be executed also if these eclasses change, i.e. after each emerge --sync. To call the above command automatically at the right time there are several methods:

One method is to put an executable shell script into the directory /etc/portage/repo.postsync.d/ which calls egencache in the appropriate manner in dependence of the repository name $1. For instance, you can generate an executable file /etc/portage/repo.postsync.d/50-egencache with the following content:

#!/bin/sh

[ -z "$1" ] && exit

case $1 in

# For repositories "mv" and "local" update also profile/use.desc:

mv|local)

: exec egencache "--repo=$1" --update --update-use-local-desc;;

# For all other repositories only update the metadata:

: exec egencache "--repo=$1" --update;;

esac

If the above shell script is executable, egencache will be called after every emerge --sync.

An alternative is to call egencache automatically (only) at each call of eix-sync. To do the latter, put e.g. the following lines into /etc/eix-sync.conf:

@StatusInfo 'Updating metadata for my_local_overlay'

@egencache --repo=my_local_overlay --update --update-use-local-desc

In a similar manner, you can also treat e.g. overlays managed by layman: For each layman overlay which you use you should put corresponding calls to egencache into /etc/eix-sync.conf (however, please be warned again that this is a security risk since it means that the ebuilds in the overlays will be executed with eix-sync).

No matter which method you use: For layman overlays there is an additional problem. Depending on the version control system of the overlay, layman might refuse to sync if you have written data into the metadata/ subdirectory, or layman might remove this subdirectory during syncing.

For overlays managed by git, this problem can be solved as follows: Create in the main directory of that overlay the file .gitignore (if it does not already exist) and add to it the lines:

/.gitignore

/metadata/

This will cause that the file .gitignore itself as well as the subdirectory metadata (and its content) are ignored (and thus not updated) by git/layman but only by your above call.

INSTALLATION

It is Gentoo policy to not modify user's CXXFLAGS and LDFLAGS. It is also Gentoo policy to not change default configs if this can be configured in another way.

For this reason, many USE-flags have been removed in recent gentoo ebuilds. For this reason, very likely your ./configure settings for eix are not appropriate for eix. The maintainer of eix strongly recommends to export

EXTRA_ECONF=--enable-security --enable-new-dialect --enable-strong-optimization

(At the end of this section it is explained how to do this most conveniently.) The purpose of this is to modify CXXFLAGS and LDFLAGS in a way which highly optimizes eix (and usually essentially decreases the binary size and corresponding memory usage) and which sets them such that it is reasonably safe (concerning *FLAGS) to run most code as root. Of course, some of the chosen *FLAGS are somewhat experimental, but the eix code tries hard to support all of them. Anyway, if this is too experimental for you, you can replace --enable-strong-optimization by --enable-optimization. You can also remove --enable-new-dialect. Both of these modifications will usually result in less optimized code. Conversely, you can replace --enable-security by --enable-strong-security which will choose some (experimental) *FLAGS (if available) which will increase the security at the cost of a considerable loss of speed.

If you compile for a low-memory system, it might also be advisable to add

--without-dep-default

--without-src-uri-default

and/or

--without-required-use-default

to the above EXTRA_ECONF. The latter is similar to setting DEP=false and/or REQUIRED_USE=false in some file in /etc/eixrc/ and thus decreases memory usage of eix by disabling storing of the corresponding data. Some more specialized options you might want to add to EXTRA_ECONF are

--enable-warnings --enable-strong-warnings --debugging

with their obvious meaning concerning *FLAGS. Further EXTRA_ECONF arguments which had previously been accessible through USE-flags are

--enable-swap-remote (exchange the role of the two remote adresses used for eix-remote)

--enable-separate-tools (build separate small binaries for the tools instead of linking them into the eix binaries)

The eix maintainer recommends to configure your package manager to export the desired EXTRA_ECONF automatically when emerging eix. For portage, this can be done as follows. Put the line

app-portage/eix eix-extra-econf.conf

into the file /etc/portage/package.env or into some file of that directory (creating this file/directory if it did not exist yet), and then create the file /etc/portage/env/eix-extra-econf.conf with the corresponding line EXTRA_ECONF="...".

Alternatively, install eix from the mv overlay. This also gives you the experimental option to build eix using the meson build system (instead of autotools). If this build system works on your system, this is recommended because it is faster and works nicer with ccache than autotools. At the time of writing this text, it is not possible to use meson with the ebuild from the main gentoo repository.

HISTORY

eix was formerly known as portagedb. The name was changed because a part of portage is also called portagedb, which was a bit confusing for everyone.

The functionality of eix-update was once triggered by using the -u switch on eix. It was than separated to provide better maintainability. Thus update-eix came to life. Meanwhile, it is the same executable with functionality distinguished by its call name. and the original name update-eix was renamed into eix-update.

Also eix-diff was previously called diff-eix, eix-remote was previously called update-eix-remote, eix-layman was previously called update-eix-layman, and eix-functions.sh was previously called functions-eix.sh (and much earlier update-eix-functions.sh). The reason for all these renamings is to have a more consistent naming scheme: All programs belonging to eix now start with eix-* (with the exception of versionsort which is more or less just an independent tool).

If you cannot get accustomed to this new naming scheme or have scripts depending on the old names, you can use symbolic links for the original names; this is explicitly supported and is not intended to be deprecated.

Previously, there was a ./configure option to install such symlinks or a reminder about their removal automatically, but this support has been removed as of eix-0.24.0.

Since the introduction of the %{*VARIABLE} syntax in eix-0.8.0, it is not reasonable anymore to use different variable names for eix and eix-diff. Hence, all corresponding DIFF_* variables have vanished.

The cache method metadata-flat was previously just called metadata. The cache method assign was previously called backport or portage-2.1. The cache method flat had previously the name portage-2.0 which was even preferred. Anyway, the obsolete names are still supported.

portage-2.1 and portage-2.1.1 doesn't remove the old dep-cache, thus eix might find packages that are not in portage anymore if the flat/assign cache method is used. To circumvent this, eix-sync used to delete the old cache (rm -rf /var/cache/edb/dep/*). Since most people have no need to use this cache method anymore and deleting the old cache slows down the next portage run, this is not the default anymore (but still available as an option which can be put into /etc/eix-sync.conf).

eix-sync used to default to gensync instead of layman. See the description of /etc/eix-sync.conf how you can still use the deprecated gensync if you want to.

eix-sync no longer supports logging; options -v and -V have been removed. This avoids problems like no visible output with EMERGE_DEFAULT_OPTS=--ask. You should now use redirection when you want to use eix-sync in a cronjob.

The mechanism described now by DEFAULT_MATCH_FIELD has changed. The previous (less powerful) MATCH_.*_IF and MATCH_ORDER variables are not supported anymore.

The ADD_CACHE_METHOD and ADD_OVERRIDE_CACHE_METHOD variables are no longer built-ins but only used implicitly in delayed substitution in the default of CACHE_METHOD and OVERRIDE_CACHE_METHOD. In particular, setting the latter variables in /etc/eixrc without adding the delayed substitution " %{ADD_CACHE_METHOD}" or " %{ADD_OVERRIDE_CACHE_METHOD}", respectively, will prevent the former variables to have any meaning.

Before eix-0.18.0, customizable version output properties like <installedversions:VAR> or <availableversions:VAR> did not exist. Instead there was a chaos of parameters for <installedversions:*> and a bulk of variants for printing available or installed versions for feeding the output to scripts like <fullvailableversions> etc. Now all this has vanished: The variables NAMEVERSIONS, EQNAMEVERSION, ANAMESLOT, ANAMEASLOT, NAMESLOT, NAMEASLOT, and DATESORT take the role of all the earlier variants (where DATESORT demonstrates a related example that was previously not available). See the description of these variables in eix --dump for details. To see the effect of such an example try e.g.

eix --format '<availableversions:ANAMESLOT:ANAMESLOT>' --pure-packages gcc

See also the comments for the -I option.

Since eix-0.20.0 the logical connectives for EXPRESSIONs have changed dramatically: Not only braces are now possible, also chains with -a and -o are now treated left-associative as most users would intuitively expect. The negation --not is now treated as a logical operation starting a new BRACE_OR_TEST and no longer considered as part of TEST_OPTIONS (which was a source of confusion for many users). Now --pipe is really handled as part of TEST_OPTIONS and does not implicitly introduce logical connectives.

With eix-0.20.1 all the previously used files /etc/portage/package.*.nowarn are no longer supported by default: They were replaced by the single file/dir /etc/portage/package.nowarn. If you still want to use the previous files, set OBSOLETE_NOWARN=true in the environment. See the description of the variable PACKAGE_NOWARN (in the output of eix --dump) to understand why this works.

eix-installed was part of eix-test-obsolete before eix-0.22.4 which was rather confusing for users and for maintaining, since their task has nothing in common.

The default error-behavior of eix-sync has changed in eix-0.23.10: Previously, the -F option was automatic and could not be disabled.

In <eix-0.25.6 there was a NEWLINE variable which could add a magic newline after a package output. This hack had been only introduced to deal with obsolete FORMAT strings and has finally been removed.

The variables COLORSTRING, COLORSTRING_ALT, and TERM_ALT have been replaced by the more flexible variables COLORSTRING? and TERM_ALT?.

In eix-remote before eix-0.28.5 the current option -x was on by default. This would still be a reasonable default, but some users were confused by the feature (some even believed it is a bug) so that it is now necessary to configure this default manually (by setting EIX_REMOTE_OPTS=-x in /etc/eixrc).

The tool eix-header did not exist before eix-0.28.6; instead eix had the options --is-current, --print-overlay-path, --print-overlay-label, --print-overlay-data which are now redundant and have been removed.

Since eix-0.29.6 the options --format-verbose and --format-compact have been removed, because their effect can be better obtained by exporting the environment variables FORMAT_VERBOSE or FORMAT_COMPACT, respectively. Instead, the option --format overrides now the FORMATSTRING independently of the chosen format.

Since eix-0.29.6 the options --verbose and --compact are no longer toggling; for switching off, there is the new option --normal.

eix-functions.sh could previously only be sourced; only since eix-0.32.2, eix-functions.sh is also a program whose output is meant to be used with "eval".

TRANSLATION

For a simple fixed translation of the default FORMATSTRING to your language, it suffices to set the variables starting with I18N_... in your /etc/eixrc or ~/.eixrc: Redirect the output of eix --dump-defaults to a file to get a list of all variables. Some of the last ones are those starting with I18N_.... you are looking for.

The variables starting with I18N_COLUMN_.... are special and can be used to adopt the columns to a new layout which might be necessary due to different lengths of the translations. (Note that the column counting will be garbled if you do not use UTF8 encoding for your language). You can see the default values of that variables in the corresponding variables C_COLUMN_.... which appear nearby (but which should not be modified for the purpose of translation). Normally, it should be sufficient to redefine I18N_COLUMN_CONTENT and I18N_INST_COLUMN_CONTENT to appropriate numbers. To make sure that all columns are correct, you should finally consider the output of all of the commands

eix -vxe binutils

eix -ve binutils

eix -le binutils -oe sun-jdk

eix -xle binutils

eix -vle binutils

eix -xvle binutils

eix -vle sun-jdk

Here, binutils means an installed and slotted package, while sun-jdk means a masked (with an explanation in package.mask) package.

Once you have your translation finished, you can send the changed variables to the eix maintainer or to eix on github or - even better: Add your language to po/LINGUAS, call contrib/make to generate a corresponding po/*.po file, and add your translation to that data in the file which refers to src/eixrc/def_i18n.cc

Of course, you are welcome to translate also other texts in that file: People might acknowledge even partial translations of the most important messages.

You can send your new po/*.po file to the eix maintainer or, even better: You can put your changes to github and make a pull request.

The ebuild has removed many previous USE-flags to follow gentoo policy. Therefore, the maintainer strongly recommends the usage of EXTRA_ECONF for installation, see Section INSTALLATION.

AUTHORS

Main authors of the programm:

Martin Väth <martin at mvath.de> (developer, current maintainer)

Emil Beinroth <emilbeinroth at gmx.net> (developer, previous maintainer)

Wolfgang Frisch <xororand at users.sourceforge.net> (inactive developer, initial author)

Roland Wittmann <linuxcommando at users.sourceforge.net> (inactive developer)

Many other contributors can be found in the AUTHORS file.

eix

НАЗВАНИЕ

СИНТАКСИС

ОПИСАНИЕ

OPTIMIZATION, MEMORY, SECURITY

ПРИМЕРЫ

КЛЮЧИ

Common options

Special information options

Output options

Special options for eix

Options for EXPRESSION

Match field selection

Match algorithm

Defining layouts (see FORMATSTRING below)

Special options for eix-update

OUTPUT

Slots

Masking

eix-diff

FORMATSTRING

Conditional blocks

Package properties

Escape sequences

Colors

Examples:

FILES

/etc/eix-sync.conf

/etc/eixrc

EIXRC

EIX_SYNC_OPTS, EIX_SYNC_CONF, EIX_REMOTE_OPTS, EIX_LAYMAN_OPTS, EIX_TEST_OBSOLETE_OPTS

~/.eixrc

/etc/portage/sets.eix

/etc/portage/package.slot_upgrade_forbid

/etc/portage/package.slot_upgrade_allow

/etc/portage/package.accept_keywords.nonexistent

/etc/portage/package.keywords.nonexistent

/etc/portage/package.mask.nonexistent

/etc/portage/package.unmask.nonexistent

/etc/portage/package.use.nonexistent

/etc/portage/package.env.nonexistent

/etc/portage/package.license.nonexistent

/etc/portage/package.accept_restrict.nonexistent

/etc/portage/package.cflags.nonexistent

/etc/portage/package.installed.nonexistent

/etc/portage/package.nowarn

/var/cache/eix/portage.eix

/var/cache/eix/previous.eix

/var/cache/eix/remote.tar.bz2 /var/cache/eix/remote2.tar.bz2

masked-packages

Examples:

Options

versionsort

BUGS (and sort of FAQ)

SPEEDUP

INSTALLATION

HISTORY

TRANSLATION

AUTHORS

SEE ALSO

Index